This is a CMMG AR-15 .22 LR magazine and it is designed to work with CMMG conversion kits and similar Atchisson type .22 LR conversion systems. It features a 25 Round capacity, Grey Polymer Construction, with six hex-head screws for complete disassembly. It is the same size as a curved USGI style 30 round magazine as a result feeds very reliably.
Features and Specifications:
Manufacturer Number: 22AFC25
CMMG ARC Magazine
Caliber: .22 Long Rifle
Capacity: 25 Rounds
Body Material: Polymer
Spring Material: Steel
Follower Material: Polymer
Baseplate Material: Polymer
Finish: Gray
Fits:
Atchisson-type Conversion Systems
ATI Kits
Chiappa Kits
CMMG Kits
Ceiner Kits
Spike's Tactical Kits
Stag Arms Kits
SIG R522 and P522
Target Sports Kits
Tactical Industries Kits
Tactical Solution Kits
Note:
Does not function with Bolt Hold Open adapter
Features and Specifications:
Manufacturer Number: 22AFC25
CMMG ARC Magazine
Caliber: .22 Long Rifle
Capacity: 25 Rounds
Body Material: Polymer
Spring Material: Steel
Follower Material: Polymer
Baseplate Material: Polymer
Finish: Gray
Fits:
Atchisson-type Conversion Systems
ATI Kits
Chiappa Kits
CMMG Kits
Ceiner Kits
Spike's Tactical Kits
Stag Arms Kits
SIG R522 and P522
Target Sports Kits
Tactical Industries Kits
Tactical Solution Kits
Note:
Does not function with Bolt Hold Open adapter
20 Ratings
Great product works as described no issues with feeding
February 13, 2023
Great service, works well.
July 22, 2022
Keep them lubed up. These are great.
May 7, 2022
mag
20 rd ok 25 all most impossible and tend to stick or jam
April 18, 2022
Ecxcellent product
Works great. Exactly what you hope for.
March 26, 2022
Will by again
Loads easily and works!
January 22, 2022
Well made, better than original. You won’t be disappointed!!
October 17, 2021
Perfect Fit
Bought a few more of the .22LR conversion magazines so I wouldn't spend so much time reloading. Converted an AR-15 A4 over to .22LR with the CMMG conversion kit for my wife. That is one nice conversion. Operation is smooth. 3 came with the conversion kit, but she likes it so much, I was doing a lot of reloading magazines. Maybe now I won't have to reload so many. You can never have too many magazines.
April 26, 2019
Purchased as a replacement after first one broke
I purchased this magazine to replace the original magazine that came with the conversion kit produced by CMMG. Unfortunately the first magazine failed in use when the plastic housing at the top of the magazine shattered during use at the back of the loading area, rendering it unusable. I love the conversions kit so I purchased a new magazine after never hearing back from CMMG when I inquired about a replacement for the defective mag. Oh, well. I didn't have much choice if I wanted to continued using the CMMG bolt.
May 28, 2018
Cost Effective Quality Magazing
I finally had an opportunity to see if the slop in the original magazines contributed to the jamming and misleading I kept experiencing. By switching to the CMMG AR-15 magazine I was able to shoot significantly more rounds with out having to stop & clear the jam. Will definitely purchase more!!
March 23, 2018
Quality Materials, Poor Function
I got three of these with the CMMG conversion kit. These feel very solid like they could take a lot of abuse. There weren't any problems when feeding in the gun. They fit very well in the mag well of my rifle which is apparently on the smaller side. But, the rounds tend to bind up inside once more than 20 or 21 are loaded. That makes fully loading the magazine incredibly difficult, even with a mag loader, which makes me worry about damaging rounds. Once 25 are loaded, if I remove the top round by hand, the next round or two can fall out on their own because the rest of the rounds are all jammed up. That reason alone is why I don't want to use these magazines.
May 10, 2017
Works as intended. Takes
Works as intended. Takes a bit to load. Was hoping there was something that you could manually pull the spring down with hence the 4 star. It feeds good and that's what really counts.
November 25, 2016
These really aren't that
These really aren't that great but they do work. The rounds just fall out the top. I have 2 of these. If i only put 20 rounds or so it seems to work better. More than that and i can remove a round and the spring won't push the next one up. In the rifle though it seems to work fine. I haven't had any misfeeds unless the mag is full.
December 3, 2013
Works flawlessly in both
Works flawlessly in both of my .22lr AR-15's.May need minor fitting, but it's designed that way. Just read the instruction.
March 31, 2013
What can I say, except th
What can I say, except this has worked flawlessly?
January 18, 2013
I ordered three of these
I ordered three of these before CTD sold out. They fit and functioned fine in my Bushmaster M4. I didn't have to modify them. They locked in tight. Cycled some rounds and they performed just fine. Glad I got these before CTD sold out.
December 26, 2012
I purchased this magazine
I purchased this magazine for my CMMG AR-15 .22 conversion bolt. This magazine was identical to the mag included in the conversion kit, and functioned just as perfectly. I have put a few hundred rounds through this mag without issue. It's a little tough to load, but it's a 26 round single stack mag. What do you expect?
December 9, 2012
Worst magazine I've seen.
Worst magazine I've seen. Barely fit in my gun. Had to pull it hard just to get it out of the mag well. Don't bother.
November 1, 2012
Ordered 3 of these. Funct
Ordered 3 of these. Functioned perfectly and fit DPMS lower without modification. It is a little tuff to get the last few rounds in, but overall very satisfied.
August 30, 2012
It doesn't tell you that
It doesn't tell you that you have to grind off little tabs on the back of the mags or it gets jammed in your gun. The one that comes with your CMMG kit has them ground off yet these do not. Beware and grind them off or if you insert into your gun with a quick slap up you will have issues getting it out.
June 22, 2012
Will it fit a Mossberg 715T .22LR AR?
Answer:
No this will not fit. Try item # MAG-428-326.
Will it fit Colt 22lr rimfire rifle?
Answer:
No it will not. The Hammmerli mags are the same as the Colt AR-15 .22 LR mags. https://www.cheaperthandirt.com/search.php?search_query=hammerli&fq=category%3A11306&fq=price%3A25%2C233&page=1
Will this fit a colt ar .22LR?
Answer:
No it will not. Try MAG-428-316
What brand gun do these work on ?
Answer:
They work with the CMMG Bravo and CMMG Echo AR-15 .22 LR conversion kits. https://www.cheaperthandirt.com/cmmg-inc./parts-and-accessories/parts-by-gun-model/ar-15/.22lr-conversion-kits/
Will this fit my chiappa m 4 ?
Answer:
The Chiappa Mfour uses Atchisson-type mags. So it should work. But we alos have the Mfour magazines. See item# 2-MGCHPCF470-005
Will this mag fit my Tippman 22 cal. M4?
Answer:
No, the Tippman M4 uses proprietary magazines.
Does this fit a HK 416 .22 lr?
Answer:
No it does not. Go with item# 35138
Will this work on smith and Wesson ar22 ?
Answer:
No it will not. I recommend item # 72008.
Will to this fit my Anderson lower?
Answer:
Yes, but the mag only works with the CMMG .22 LR conversion kit.
Does this magazine fit right and left hand conversion kits?
Answer:
Yes it should.
Will this magazine work with a Multi Caliber AR Platform?
Answer:
This should fit any standard AR-15 lower with the following conversion kits Fits:Atchisson-type Conversion Systems ATI Kits Chiappa Kits CMMG Kits Ceiner Kits Spike's Tactical Kits Stag Arms Kits SIG R522 and P522 Target Sports Kits Tactical Industries Kits Tactical Solution Kits
Will this mag work with Mossberg 22 AR ?
Answer:
It is designed for conversion kits it does not state that it will work for any other item. The manufacture does not guarantee fit or function with any firearm other than the firearm the item was originally designed for.
Will these mags function with the Ciener conversion kit?
Answer:
We cannot guarantee compatibility with any other types of 22lr Uppers beside with CMMG conversion kits and similar Atchisson type .22 LR conversion systems.
Would this fit my colt 22LR m4?
Answer:
No it will not. You need item# MAG-428-316
Will this fit the s&w m&p 15 22lr?
Answer:
No it will not. The Smith & Wesson M&P15-22 uses a proprietary magazine. It will only accept M&P15-22 specific mags.
I have ordered the cmmg 22 conversion kit for my smith and Wesson ar15 sport ,hoping it will work will work with my rig. So will this mag work with the combination I will have?
Answer:
Yes it will.
Will this fit a mossberg 702 plinkster 22 ?
Answer:
No it will not. Please see item# 102368
I heard these work with the mauser 15 any truth?
Answer:
No. That rifle uses proprietary ISSC magazines
Will this fit a S&W M&P 15-22 Lr???
Answer:
No it will not. The M&P 15-22 uses a proprietary magazine. See item# MAG-6413
Would this fit a Hammerli Tac r1 At 22?
Answer:
No it will not.
Dose it work with a hk416d22lr
Answer:
No it will not
I have a Colt AR-15 and I can change the bolt from a 223/5.56 to a 22LR. Would this magazine fit my gun and the 22LR bolt?
Answer:
Not if you have the Colt-brand bolt. This will only work with Ciener-pattern kits
will this mag fit a bushmaster carbon 15-22?
Answer:
No, it will not.
Do they make a speedloader for is magazine
Answer:
Yes item MAG-118-003 and also item GNS-416-001 combined with GNS-416-005
Will this may fit a dpms lower?
Answer:
Yes it will.
Is this magazine compatable with the Rock Island AK K 22 ??
Answer:
No it is not.
Will this work with an old military m16 22 LR bolt adaptor?
Answer:
No it would not.
Will this fit the m&p 15-22
Answer:
No. Item MAG-6434 will fit the S&W M&P15-22