The Most Popular Pistol Chassis System Now Available For Your Springfield XD or XDM
CAA has rolled out a new Micro Roni specifically designed for your Springfield Armory XD or XDM.This kit allows you to place your pistol into the chassis without disassembling your firearm. It essentially gives you the benefits of a pistol caliber carbine, with the flexibility to quickly and easily change back to your favorite pistol.
This chassis includes all the Gen 2 upgrades featuring a new extended stabilizer that allows you to shoot while the arm brace is in the folded position. Also, it has a more robust charging handle, accepts the CAA brass catcher, has an aluminum picatinny rail on top, and they added a magazine catch/release button to the spare magazine holder.
Springfield XD/XDM 9/40 Micro Roni Specifications and Features:
- Manufacturer Number: MCKSA9
- Micro Roni Gen 2 STANDARD Handgun Conversion Kit Chassis
- No Pistol Disassembly Required - Just Place Pistol Into The Kit, Lock, and Go
- Top Picatinny Rail, Allowing a Combination of Sights and/or Optics
- Side Picatinny Rails for Mounting Additional Accessories, I.E Thumb-Rests
- Ambidextrous Fast and Easy Handling
- Right-Folding Arm Brace for Easy Concealment and Carry
- Able to be Fired While Arm Brace is in the Folded Position
- Front Spare Magazine Holder for a Faster Reload
- Polymer Chassis
- Overall Width 2.48
- Overall Height 5.70
- Overall Length 13.70
- Black Finish
- Chassis and Stabilizing Brace
Does NOT Include:
- Springfield Armory Pistol
Fits:
- Springfield Armory Models: XD, XDM, XD Mod.2, XDM Elite in 9mm/40sw
Not compatible with threaded barrels or suppressor height sights
Note: Here is the NRA's interpretation of the latest ATF letter regarding the use and legality of pistol braces.
NRA Interpretation of Latest ATF Letter
1 Rating
Looks too good to be 'true'
I was hopeful that this Roni would be awesome and I would get to have even more fun with my XD at the 50yrd range, but I was disappointed.The Good:The overall plastic body makes for a very nice and lightweight while still sturdy build. The forward lower grip is really comfortable in the hand but the extra magazine storage slot is inconveniently placed and therefore useless.The Bad:The slide on the XD is a little difficult to line up on the charging handle adapter due to tiny variations in the molding of the plastic. The charging handle doesn't return fully to the forward position after firing and loading the new cartridge even after lubrication.The WORST:The screws that hold the Picatinny Rail to the plastic molded body are small and short. Because the screws go directly into the plastic, they are difficult to tighten without stripping. After 150rds the screws had loosened themselves and made the scope I had mounted totally useless with a group spread of 3 feet at 25 yards. I couldn't keep the scope True.
May 1, 2022
Will this only fit mod.2 xdm s?
Answer:
This will fit the XD, the XD Mod 2, the XDM, and the XDM Elite.
Will this fit the XD Subcompact 9?
Answer:
It is not compatible with the 3" Subcompact.
Will it fit the XD subcompact 9?
Answer:
It is not compatible with the 3" Subcompact.
Will this fit XD 40 full compact?
Answer:
If your XD 40 has a barrel length between 3.8" - 5", then yes this should fit.
Will this work with my spring field mod 2 it has a threaded barrel MCK site all say not compatible with threaded barrel ?
Answer:
No this will not accommodate a threaded barrel.
Where do I get a compatible flashlight?
Answer:
See item# 119808
Does this fit the 9mm xdm elite osp?
Answer:
No, this will not fit barrels over 5" long.
Will it fit the zigana PX-9?
Answer:
No this will not fit.
Will this fit springfield armory xd (m) 4.5 40 cal ?
Answer:
Yes this will fit.
What about the xdm elite 10mm 3.8?
Answer:
No. Go with item# 129621
Will this work with the 9mm xdm. Compact 3.8. ?Your add says no fit under 3.8, dose that includes 3.8 or not. ?
Answer:
Yes it is compatible with the 3.8" XDM
Will this work with the sub compact mod 2?
Answer:
No. Per the written description: Not compatible with barrel lengths under 3.8" or over 5"
Will it fit Springfield XDM Elite OSP 4.5 9mm w/ the wider slide serrations, threaded barrel and suppressor hight sights?Seeing some answers contradicting each other.
Answer:
No it will not. According to CAA it is not compatible with a threaded barrel or suppressor height sights.
Will this fit my Springfield XDM 9, 4.25 inch barrel?
Answer:
Yes it should.
Will it hit a Springfield xdm .40 ?
Answer:
Yes it should.
Will this fit on the Springfield hellcat?
Answer:
No it will not. CAA Does not currently make an MCK Micro Roni Conversion for the Hellcat.
Will this work with a Springfield xdm 45 acp with the 5.25" stock barrel? The rest of the hun is stock to.
Answer:
No it will not
Will this fit sw 40 MP
Answer:
No it will not
Will this fit the xdm elite 9 threatened barrel with the original high sights ? Or do I have to take them off and if so replace them with what. Thank you in advance
Answer:
No it will not fit with the high sights
Will this fit a XDs -9mm 3.3 Mod2
Answer:
No, it is not compatible with the 3.3" models.
Will this fit a Springfield XDM Elite 9mm 4.5 OSP Pistol with a Threaded Barrel and if so would I need to take off the sight
Answer:
No it will not.
Will this fit a xd 45acp
Answer:
No it will not
Will this work with the springfield xdm 9mm 5.25 competition?
Answer:
No it will not.
Will this work on the gen 2 sub compact 9mm
Answer:
No it will not
Will this fit Springfield XD 40 subcompact?
Answer:
No it will not.
Will this fit the xdm9 3.8"
Answer:
This fits XD(M) guns with barrel lengths from 3.8" to 5"
Will it fit xd-40 tactical with 5 inch barrel
Answer:
Yes
Can you use it on a XD defender 4" 9 mm?
Answer:
Yes it should
Will this work with the springfield XD 9mm subcompact
Answer:
No it will not
I have a S&W XD mod.2 .40 cal will this fit if not what other options if any would be available?
Answer:
According to CAA this should fit your firearm just fine