OD Green Conversion Kit For Your Smith & Wesson M&P 2.0 Pistol
Command Arms Accessories USA is a developer and distributor of modern tactical accessories, but they are most famous for their Micro Conversion Kit or simply MCK, which has taken the country by storm.This kit allows you to place your pistol into the chassis without disassembling your firearm. It essentially gives you the benefits of a pistol caliber carbine, with the flexibility to quickly and easily change back to your favorite pistol.
It includes an ergonomic finger groove grip provides extra stability, a stabilizing arm brace, is an ambidextrous system, and the top picatinny rail allows for sights or optics.
Micro Roni for M&P 2.0 Specifications and Features:
- Manufacturer Number: CAAMCKSWMPG
- Micro Roni STANDARD Handgun Conversion Kit Chassis
- Ergonomic Finger Groove Grip for More Stability
- Top Picatinny Rail, Allowing a Combination of Sights and/or Optics
- Side Picatinny Rails for Mounting Additional Accessories
- Ambidextrous Fast and Easy Handling
- Right-Folding Stock Arm Brace for Easy Concealment and Carry, Locks in the Folded Position
- Front Spare Magazine Holder for a Faster Reload
- Polymer Chassis
- Overall Width 2.48
- Overall Height 5.70
- Overall Length 13.70
- OD Green Finish
- Chassis and Stabilizing Brace
Does NOT Include:
- Smith & Wesson Pistol
Fits:
- S&W M&P 2.0 Full or Compact 9mm/40s&w Models
- Fits 3.6" and 4.25" Models Only
Does NOT Fit:
- Smith & Wesson M&P Gen 1 Models
- Not Compatible with SD9VE/SD40VE or Shield Models
- Models with Suppressor Height Sights
- If your M&P has a manual safety, it needs to be removed for compatibility
Note: Here is the ATF's latest rule regarding the use and legality of pistol braces. Installing a pistol brace may convert your firearm into an SBR and all NFA rules will apply.
Latest ATF Pistol Brace Rule
Will this fit my M&p 40 C ?
Answer:
Only if you have the M&P40c 2.0
Will this fixsmith and wesson m&p 40 pro serie 5 barrel?
Answer:
No it will not.
Will this work a S&W M&P 2.0 10mm?
Answer:
No this will not fit.
Will this work on a walter p 99 ?
Answer:
No it will not. CAA does not make one for any of the Walthers
Will this fit my smith and Wesson m&p 9c ?
Answer:
If you have the M&P9c 2.0 it will.
Will it fit M&P 40 pro series 4.25 barrel?
Answer:
This should fit your model, however, it may not accommodate taller suppressor height sights.
Does this fit glock 19?
Answer:
No it does not.
Does this fit the .40 Pro C.O.R.E? Or is there compatible that I missed? Tried to look through the other questions first.
Answer:
No this will not fit. This will not accommodate taller suppressor height sights.
Will a m&p 2.0 .45 compact 4" fit?
Answer:
This does not fit the 45acp models.
Does this fit m&p shield plus?
Answer:
No this will not fit.
Is this compatible with a 2.0 3.6 inch with a manual safety?
Answer:
This is not compatible with manual thumb safeties. If you remove the thumb safety, then yes this will fit.
Is this compatible with the 2.0 with a manual safety?
Answer:
No, this is not compatible with manual safeties.
Will this fit the Smith&Wesson M&p 9mm 2.0 Compact W/Threaded Barrel?
Answer:
No this will not accommodate the threaded barrel.
Will it be compatible with the laser sight on the M&P 40 model 2.0? I know it says it fits but didnt see anything about the laser sight.
Answer:
No this will not fit with a laser attached directly to the firearm. However, CAA makes a laser that attaches to this conversion kit. Check out item # 122366.
Will the fit my 5" smith@wesson M&p 9mm 2.0?
Answer:
Smith & Wesson M&P 2.0 9mm/40 Full Size/CompactFits 3.6" and 4.25" Models Only
Will the fit my 5" smith@wesson M&p 9mm 2.0?
Answer:
Smith & Wesson M&P 2.0 9mm/40 Full Size/CompactFits 3.6" and 4.25" Models Only
Will this fit my M&P 380 shield??
Answer:
No it will not.
Will it fit a 5 inch m&p ?
Answer:
No it will not. It fits 3.6" and 4.25" models only.
Do I have to take my safety off ?
Answer:
If you are not familiar with this process we recommend taking your firearm to a qualified gunsmith for assistance.
Got it fit the m&p 40shield?
Answer:
No it will not. I recommend item # 133756 or 133757.
Will it fit the performance center mp9 shield ez?
Answer:
Per: CAA it does not fit the EZ or Performance Center models.
Will this fit M&P .45 compact ? Not the 2.0
Answer:
No it will not.
Will this fit M&P 40
Answer:
Per the written description: Fits: S&W M&P 2.0 Full or Compact 9mm/40s&w Models - Fits 3.6" and 4.25" Models Only - So, yes it will.
Would the M&P 9c fit and function in the carbine kit
Answer:
Yes, it should fit the S&W M&P 2.0 Full or Compact 9mm/40s&w Models
Will it work with thumb safety models
Answer:
No it is not compatible with S&W M&P models that have a thumb safety.
Can this be used with the M&P 2.0 22LR? Also is this Connecticut legal?
Answer:
No it can't, We cannot provide legal advice, we recommend contacting your county sheriff or local FFL for clarification
Is this compatible with the M&P 2.0 Compact 4" barrel? Or is this brace only compatible to the 3.6" and 4.25" M&P 2.0 Compact?
Answer:
It will not fit the 4". CAA make as separate version for the 4"