Battle Arms Development RIGIDRAIL 17" M-LOK Handguard is a sleek lightweight handguard for your AR-15 Builds. The RIGIIDRAIL design balances light weight and strength/rigidity. Made out of aircraftgrade aluminum it is only 10.44oz with hardware. It has a partial top rail at the rear and forward points of the handguard. The rest is either M-LOK slots at 3, 6, 9 and partial 12 o'clock postions or skelentonized, with an addditional 4 45° Positions for forward mounting lights, lasers, or etc. This handguard comes included with a barrel nut and barrel nut wrench.
Features and Specifications:
Partial Picatinny Top Rail (Matching BAD556 Lightweight Upper Receiver)
Material: Aircraft Grade 6061-T6 Aluminum
Overall Length: 17"
Weight: 10.44oz.
Inner Diameter: Side to Side-1.315in, Top to Bottom-1.695in
M-LOK Slots at 3, 6, 9, and partial 12 o'clock positions
Additional Single M-LOK Slots at (4) 45° Positions for Forward Mounting Light, Laser, etc.
Barrel Nut Diameter: 1.378in
Barrel Nut: 7075 Aluminum Type 3 Class 2 Hard Anodized Clear (Bronze finish)
No Barrel Nut Shims Required for Installation
17-4PH Cored Stainless Steel Rail Mounting Attachment - Patent Pending by CMT
Four Anti Rotation QD Sling Sockets: Two at front and Two at rear. 3 & 9 o'clock Positions
No Contact with Gas Tube
Compatible with most Low Profile Gas Blocks
Rotation limited QD sockets
Finish: Mil-Spec Type 3 Class 2 Hard-coat Anodized
Compatible with AR-15 Upper receivers
Made in the USA!
Features and Specifications:
Partial Picatinny Top Rail (Matching BAD556 Lightweight Upper Receiver)
Material: Aircraft Grade 6061-T6 Aluminum
Overall Length: 17"
Weight: 10.44oz.
Inner Diameter: Side to Side-1.315in, Top to Bottom-1.695in
M-LOK Slots at 3, 6, 9, and partial 12 o'clock positions
Additional Single M-LOK Slots at (4) 45° Positions for Forward Mounting Light, Laser, etc.
Barrel Nut Diameter: 1.378in
Barrel Nut: 7075 Aluminum Type 3 Class 2 Hard Anodized Clear (Bronze finish)
No Barrel Nut Shims Required for Installation
17-4PH Cored Stainless Steel Rail Mounting Attachment - Patent Pending by CMT
Four Anti Rotation QD Sling Sockets: Two at front and Two at rear. 3 & 9 o'clock Positions
No Contact with Gas Tube
Compatible with most Low Profile Gas Blocks
Rotation limited QD sockets
Finish: Mil-Spec Type 3 Class 2 Hard-coat Anodized
Compatible with AR-15 Upper receivers
Made in the USA!
Will this fit a bushmaster carbon 15?
Answer:
No. The Carbon 15 has a unique barrel nut thread. This will not fit.
you guys have this listed under the ar 10 handguards but everything else shows it is for the ar15 platform instead of the ar10. Does this product in fact fit the ar10?
Answer:
This is an AR-15 handguard.
Will this fit on a ruger 556 18inch?
Answer:
Yes