The ATI Strikeforce Universal Side Folding 12 Gauge Shotgun stock is an excellent choice for any individual who is looking to upgrade their run of the mill shotgun into a tactical dream. This stock has a side folding mechanism that allows the stock to fold to the left of the receiver, which still allows he shotgun to be fired. The TacLite six position adjustable stock slides nicely back and forth across the buffer tube. Additionally the cheek piece allows for a ½ of adjustment should you have an optic in use on your shotgun. Finally the recoil reducing buttpad and pistol grip will help soak up unnecessary recoil and ensure that you can spend all day at the range in comfort.
Specifications and Features:
ATI Strikeforce Universal Side Folding 12 Gauge Shotgun Stock B.1.10.1135
Strikeforce Shotgun Stock
Stock Side-Folds to the Left of the Receiver
Can be Fired from Folded Position
TactLite Six-Position Adjustable Stock
TracLOCK System
Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
Provides Smooth Secure Stock Adjustments
Eliminates the Need for Secondary Locking Mechanisms
No Snag Points
Dual Sided QD Attachment Point
Removable/Adjustable Cheekrest System
Elongated Design to Fit All Users
Includes Short Cheekrest with ½" of Adjustment
Commercial Buffer Tube
X1 Recoil Reducing Pistol Grip
Sure-Grip Texture
Recoil Impact is Absorbed
Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
Not Affected by Chemicals or Extreme Temperatures
X2 Recoil Reducing Butt-Pad
Upgraded 1 1/4" Thick Pad
Recoil Impact is Absorbed
Reduces Muzzle Lift
Eliminates the Felt Punch of the Recoil
Shoot Any Load Size with No Pain Transfer to the Shooter
Not Affected by Chemicals or Extreme Temperatures
Easy Installation
Adapters for All Supporting Models Included
All Mounting Hardware Included
Sratchproof & Weatherproof
DuPont Extreme Reinforced Polymer
Limited Lifetime Warranty
Made in the USA
Matte Black
Fits:
Most Maverick 88, Mossberg 500/535/590/835, Remington 870, American Tactical MB3, and Winchester 1200/1300 12 GA Pump-Shotguns
Note: This product is new and being closed out; sold "As Is" and is not returnable to Cheaper Than Dirt. Please contact the manufacturer for warranty and assistance.
Specifications and Features:
ATI Strikeforce Universal Side Folding 12 Gauge Shotgun Stock B.1.10.1135
Strikeforce Shotgun Stock
Stock Side-Folds to the Left of the Receiver
Can be Fired from Folded Position
TactLite Six-Position Adjustable Stock
TracLOCK System
Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
Provides Smooth Secure Stock Adjustments
Eliminates the Need for Secondary Locking Mechanisms
No Snag Points
Dual Sided QD Attachment Point
Removable/Adjustable Cheekrest System
Elongated Design to Fit All Users
Includes Short Cheekrest with ½" of Adjustment
Commercial Buffer Tube
X1 Recoil Reducing Pistol Grip
Sure-Grip Texture
Recoil Impact is Absorbed
Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
Not Affected by Chemicals or Extreme Temperatures
X2 Recoil Reducing Butt-Pad
Upgraded 1 1/4" Thick Pad
Recoil Impact is Absorbed
Reduces Muzzle Lift
Eliminates the Felt Punch of the Recoil
Shoot Any Load Size with No Pain Transfer to the Shooter
Not Affected by Chemicals or Extreme Temperatures
Easy Installation
Adapters for All Supporting Models Included
All Mounting Hardware Included
Sratchproof & Weatherproof
DuPont Extreme Reinforced Polymer
Limited Lifetime Warranty
Made in the USA
Matte Black
Fits:
Most Maverick 88, Mossberg 500/535/590/835, Remington 870, American Tactical MB3, and Winchester 1200/1300 12 GA Pump-Shotguns
Note: This product is new and being closed out; sold "As Is" and is not returnable to Cheaper Than Dirt. Please contact the manufacturer for warranty and assistance.
3 stars
It fits. But I thought I would be able to operate the shot gun with it collapsed that is a no. Also I had to kinda sand down the grip as it was depressing the cycle release. To extend the stock is just not very smooth. At the end of the day it works.
May 21, 2023
Great
Really like the way it looks. I also ordered one for my Ruger 10/22. Easy installation.
May 13, 2023
It's great....works even better than I thought. Just love it. Extremely easy to attach to my shotgun. Thanks for such a great product.
April 14, 2023
Nice fit, but
Nice concept but misses the mark. Made entirely of plastic which gives it the feel of a cheap part. Gripping area between pistol grip and the stock is too tight. Hence, the small rubber pad included, obviously as an afterthought. A little disappointed, but it is going on a cheap shotgun.
June 30, 2022
Compact and Sturdy Build
Sturdy unit overall, maybe after use it will wear in but has alot of rough edges, grip covering is very jelly and squirms under the hand and cheek rest is set with allen key so it is not handily adjustable. My only true dislike is the pivot action rests directly over your tumb and is not a natural feeling rest with the stick on pad provided.Feels somewhat toy-ish but overall the quality is good and feels durable.
April 13, 2022
So far only shot 10 rounds through maverick 88 shotgun. Very well made and easy to install.
October 18, 2021
Wasnt a fan.
Had to remove my shell holder to be able to fold the stock. stock sliding action was a bit stiff. couldnt access racking release. folding mechanism was very bulky and did not fit to top of hand well.
October 16, 2020
Decent
Recoil was greatly reduced, the grip feels great, it was easy to install, and it's easier to store since the stock folds. Downside is I can no longer reach everything as easily. (For reference, I'm left handed) With the regular stock I was able to have my thumb on the safety, middle finger on the pump release, and index finger on the trigger all at the same time while maintaining proper grip. With the ATI stock I have difficulty reaching the release and I can't reach the safety unless I let go of the gun and reach around/above the folding hinge. The hinge itself also chafes my thumb a bit but nothing too extreme. I would recommend looking into the non-folding version of this stock instead of this one. I would only recommend this stock if you plan on frequently shooting it with the pistol grip and not the entire stock. Also know that this stock does add several inches to the overall length of the weapon even when collapsed to the shortest setting. Pros: Easy to install Cons: Can't reach the safety while holding grip
October 4, 2019
Possibly
The stock is nice. Solid. Folds nice no wobble. Slide has no wobble. I mounted it on rem 870. The adapter piece makes the trigger further from the grip than I would like but works. Did not come with screws for cheek rest. Other wise, love it.
August 15, 2017
I received it and Install
I received it and Installed it on My 590a1 Install is easy it has built in QD attachement points. Works well with ATI 3 point sling. So far only 2 downsides is the blocked access to the trigger group . Stock must be removed to remove trigger for complete teardown. Second is the blocked access the the Action lock lever
November 6, 2016
Does it fit a rock island vr40?
Answer:
ATI does not list a fitment for the Armscor/RIA VRPA40
Does this fit the m590?
Answer:
This will fit the 590M models that come with a standard fixed stock.
Will this fit a rock island m5 since the m5 is similar to the mosberg 500?
Answer:
ATI does not list the Rock Island M5 in it's fitment. This stock includes multiple adapters and one of the adapters may fit with some hand fitting or modification. Gunsmith installation would be recommended.
Will this fit a Hatsan Escort SDX12?
Answer:
Probably not. The manufacturer does not list the Hatsan Escort SDX12 under its compatibility.
Would this fit an Emperor Duke Ultra 12ga?
Answer:
Probably not. The manufacturer does not list the Emperor Duke Ultra under its compatibility.
will this fit the mossberg 500 tactical scorpion?
Answer:
Yes it will.
Do This has an adapter?
Answer:
It includes adapters for the most popular make/model shotguns on the market like Mossberg, Remington and Winchester. Per the written description: Fits: Most Maverick 88, Mossberg 500/535/590/835, Remington 870, American Tactical MB3, and Winchester 1200/1300 12 GA Pump-Shotguns
Will this fit the Mossberg 590a1 series?
Answer:
Yes this should fit.
Will this fit a Benelli Supernova?
Answer:
No this will not fit.
Will this fit the remington express 870 20 ga?
Answer:
No this will not fit.
Will this fit a Landor Arms LND-117 AR-12?
Answer:
No it will not. You would need to contact Landor directly for a stock replacement.
Hi, I just purchased a Panzer Arms AR-12 g2 12 gauge shotgun and it does have the buffer tube with the castle nut, would this fit that shotgun? Thank You in advance.
Answer:
No it will not.
Will this fit Winchester sxp?
Answer:
No it will not. We do not currently have a side folding stock for the SXP. You may want to take a look at the collapsible stock, item# 33042
Will this fit model 870 Rem.12ga?
Answer:
Yes it will. Per the written description: Fits: Most Maverick 88, Mossberg 500/535/590/835, Remington 870, American Tactical MB3, and Winchester 1200/1300 12 GA Pump-Shotguns
Hello I have a 12g Dickinson marine tactical xx3 would this fit??
Answer:
Not likely.
Does this fit a vrpa40?
Answer:
ATI does not list a fitment for the Armscor/Rock Island shotguns. You may want to contact Armscor directly to confirm compatibility.