The Strikeforce AK-47 package by ATI rounds out your rifle receiver with a multitude of impressive upgrades. The set contains an AK-47 stock, forend and grip made primarily of tough, non-reactive DuPont Extreme Temperature glass reinforced polymer.
The TactLite six-position side-folding stock is fully adjustable, allowing you to fire from any position, including the folded position. The Scorpion recoil system which consists of a thin yet absorbent recoil pad and pistol grip with sure-grip texturing, combine to reduce muzzle lift and minimize the felt recoil.
Also included are four picatinny rails, an adjustable cheek rest system, three sling swivel studs, steel T-Nut and bolt so that you'll be able to mount your optimal accessory setup. The upper and lower handguards are ergonomic, textured and ventilated.
This entire combination comes together to complete a comfortable, no-snag, modular AK-47 platform.
Features and Specifications:
Stock, Forend, And Grip Package
Material: DuPont Extreme Temperature Glass Reinforced Polymer
Ergonomic, Textured And Ventilated Upper And Lower Handguards
Dual Sided QD Attachment Point
Slot For Tactical Sling Attachment
Drop Tube Adaptor For Use With Iron Sites
3 Sling Swivel Studs
Includes Steel T-Nut And Bolt
No Snag Points
Finish: Black
Made In The USA
Adjustable Six-Position Side-Folding Stock
-Can Be Fired From Folded Position
TrakLOCK System
- Eliminates Horizontal And Vertical Movement Of The Stock On The Buffer Tube
- Provides Smooth Secure Stock Adjustments
Scorpion Recoil System
- Scorpion Thin Recoil Pad
- Scorpion Recoil Pistol Grip
- Sure-Grip Texture
- Recoil Impact Is Absorbed
- Reduces The Challenge To Reacquire The Target By Minimizing The Muzzle Lift
- Not Affected By Chemicals
- Remains Flexible In Extreme Temperatures
- Eliminates the Felt Punch Of The Recoil
4 Picatinny Rails
- One 4" Picatinny Rail
- Two 2" Picatinny Rails
- One 2" Swivel Stud Picatinny Rail
Blank Inserts For When Rails Are Not In Use
Additional Ventilation In Forend And Top Cover
Removable/Adjustable Cheekrest System
- Elongated Design To Fit All Users
- Includes Short Cheekrest With .5" Of Adjustment
Fits: Most Stamped Receivers
Note:
Will not fit milled receivers.
Will not fit the O-PAP/N-PAP M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK).
ATI AK-47 stocks are not compatible with any AK-47 that has an under-folding stock or was originally designed to have an under-folding stock, such as the NMH-90, etc.
Do not over-tighten screws. Stripped holes and broken screw heads are not covered in the warranty.
The TactLite six-position side-folding stock is fully adjustable, allowing you to fire from any position, including the folded position. The Scorpion recoil system which consists of a thin yet absorbent recoil pad and pistol grip with sure-grip texturing, combine to reduce muzzle lift and minimize the felt recoil.
Also included are four picatinny rails, an adjustable cheek rest system, three sling swivel studs, steel T-Nut and bolt so that you'll be able to mount your optimal accessory setup. The upper and lower handguards are ergonomic, textured and ventilated.
This entire combination comes together to complete a comfortable, no-snag, modular AK-47 platform.
Features and Specifications:
Stock, Forend, And Grip Package
Material: DuPont Extreme Temperature Glass Reinforced Polymer
Ergonomic, Textured And Ventilated Upper And Lower Handguards
Dual Sided QD Attachment Point
Slot For Tactical Sling Attachment
Drop Tube Adaptor For Use With Iron Sites
3 Sling Swivel Studs
Includes Steel T-Nut And Bolt
No Snag Points
Finish: Black
Made In The USA
Adjustable Six-Position Side-Folding Stock
-Can Be Fired From Folded Position
TrakLOCK System
- Eliminates Horizontal And Vertical Movement Of The Stock On The Buffer Tube
- Provides Smooth Secure Stock Adjustments
Scorpion Recoil System
- Scorpion Thin Recoil Pad
- Scorpion Recoil Pistol Grip
- Sure-Grip Texture
- Recoil Impact Is Absorbed
- Reduces The Challenge To Reacquire The Target By Minimizing The Muzzle Lift
- Not Affected By Chemicals
- Remains Flexible In Extreme Temperatures
- Eliminates the Felt Punch Of The Recoil
4 Picatinny Rails
- One 4" Picatinny Rail
- Two 2" Picatinny Rails
- One 2" Swivel Stud Picatinny Rail
Blank Inserts For When Rails Are Not In Use
Additional Ventilation In Forend And Top Cover
Removable/Adjustable Cheekrest System
- Elongated Design To Fit All Users
- Includes Short Cheekrest With .5" Of Adjustment
Fits: Most Stamped Receivers
Note:
Will not fit milled receivers.
Will not fit the O-PAP/N-PAP M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK).
ATI AK-47 stocks are not compatible with any AK-47 that has an under-folding stock or was originally designed to have an under-folding stock, such as the NMH-90, etc.
Do not over-tighten screws. Stripped holes and broken screw heads are not covered in the warranty.
10 Ratings
Great fit
I don’t know what everybody’s complaining about with this kit, with a little effort everything fit perfect I didn’t have to trim or file anything. Everything fits perfect nice and tight.
March 23, 2023
Cheap, weak and flimsy
Cheap and should be rated for air soft
April 10, 2022
Decent but would go for something else
took about 30 minutes to install everything including drilling holes in the stock. I like the folding capability but when firing while extended the folding button sometimes engages without my input. I can extend it back but its just annoying.
May 18, 2021
No
It's to small for the gun
June 11, 2020
What a pain in the "A"
Missing parts. Had to make modifications.
November 9, 2018
Will melt hand grip
Bought and installed easily on wasr 10 but only putting 250 rounds through front grip melted slightly and was easy to burn hand. Pros: Easy to install Cons: Burned hand to easy
October 21, 2017
it doesn't fit!!cheap quality
i have to file and cut the but stock to make it fit,the hand grip make from cheap plastic and do not fit ,this is the worse arms furniture i ever seen,looks like make for a BB guns
April 29, 2017
This item does not fit a
This item does not fit a M70 O-pap! It even says so on the box but is not on the site.
November 16, 2016
Great product at a great
Great product at a great price. Took me about 20 minutes to install everything. You are going to push things together harder than you think you should. You also need to drill 2 holes in the buttstock for this installation. Everything fits perfectly on my Wasr. I dont know if I would trust the handguards as a mount point for optics. The Rifle just feels so much more solid than with the stock furniture. Buy this you wont be disappointed.
March 20, 2016
I'm missing screws would
I'm missing screws would have gotten 5 stars
March 14, 2016
Will this fit an Egyptian RM?
Answer:
It should. Some hand fitting may be required.
Will this fit my RAS47?
Answer:
Yes it will. Please note: minor hand fitting may be required.
Will this fit my pioneer hellpup?
Answer:
The handguard and grip should fit. However, the stock is not designed to attach to pistol receivers, so it will not fit.
Will this fit my ZPAP 92?
Answer:
No this will not fit. Check out item # 2-MWMI-AKG2-Y92M. Minor fitting may be required.
Would this fit the Norinco MAK 90?
Answer:
The handguard should fit but it will require hand fitting and you will need to remove material to make it fit. If you have a standard stamped receiver, then the grip & stock should fit, however, minor fitting may be required. If you have slant a cut receiver (which is common to MAK 90s), then this stock will not fit.
Will this fit century arms bft 47 vetran model?
Answer:
Yes this will fit. Minor fitting may be required.
I'm new to the AK... Will this fit a Romanian made model?
Answer:
If you currently have a standard fixed stock, then yes this will fit and minor fitting may be required. If you have an under folder stock or pistol receiver, then the stock will not fit.
Will this fit a Armco AK47 Sporter (made in China)?
Answer:
If your AK47 Sporter has a standard stamped receiver, then this will fit. If you have a MAK 90 Sporter, then this will not fit.
Will this fit on a wasr 10?
Answer:
Yes this will fit. Minor fitting may be required.
Does this kit have a standard size or Milspec buffer tube just in case I wanted to put an AR buttstock on it??
Answer:
Yes this has a mil-spec diameter tube, so it is compatible with mil-spec buttstocks.
Does any drilling and talk have to be done for the folding stock on century arms vska ?
Answer:
Minor fitting may be require as to what extent we could not say.
Will this fit azpap m70?
Answer:
No you need a Yugo pattern set. Try item STK-428-028
Will this fit the Centry Arms VSKA?
Answer:
Yes this should fit. Minor fitting may be required.
Will this fit a USA model MK 99?
Answer:
It depends on what you have. Some are compatible with this kit, but some use amb-63 furniture and others use ak-63. If your MK 99 accepts AKM furniture, then this will fit. If you would like additional assistance you can reach our product techs Monday thru Friday from 8am to 5pm central time at 1-800-421-8047 or by using our live chat feature.
Will it fit a mak-90 ?
Answer:
No it will not.
Will this fit hellpup?
Answer:
The handguard and grip should fit. However, the stock is not designed to attach to pistol receivers, so it will not fit.
Will this work for a PSA ak47 gf3?
Answer:
Yes it should fit.
Will this fit the Egypt MAADI AK 47?
Answer:
If you have a straight cut receiver that this should fit. However, if you have a slant cut, than this will not fit. Please note, some minor fitting may be required.
Will fit on a mak 90?
Answer:
No this will not fit.
Will this fit a RAS 47 AK?
Answer:
Yes it will.
Does this fit the micro ?
Answer:
Adding a stock to the Micro Draco without the ATF approval and a tax stamp would create a regulated SBR (short barreled rifle) in federal violation of the NFA. You may want to consider adding a pistol brace instead.
With this fit a SAR 1?
Answer:
Yes it should, minor fitting may be required
The one picatinny rail with the swivel stud, is the stud removable?
Answer:
It sure is
Will it fit a Zastava pap92?
Answer:
No it will not.
i have a new century VSKA polymer AK47, will this kit mount up too it? if not is there a similar kit i can get that will fit this gun?
Answer:
Yes it should, minor fitting may be required.
I have a WASR-10 AK-47. Will this be compatible with my gun?
Answer:
Yes it should, minor fitting may be required.
Will this fit norinco 56s AK47?
Answer:
Yes it should, fitting may be required.
Can I get it in destroyer grey? If so what is the product#?
Answer:
Please see item# AKS-018-014
Will this fit a PSA AK?
Answer:
If it is a rifle variant, yes. Please note minor fitting may be required for installation.
Would this fit a century arms vska 16.5?
Answer:
Yes, minor fitting may be required for installation.
Would this fit a Century arms WASR-10
Answer:
Yes it will.
will this fit aresnal slr107
Answer:
Yes it will.
Will this for a Riley defense rak47
Answer:
Yes this should.
Does this fit on an Norinco NHM-91?
Answer:
No it does not.
Will this fit a Ewbank AK EMAKM? If not, what products do you have that will fit?
Answer:
No. The stock on an under folder is not replaceable.
Will this fit a lynx 12 shotgun?
Answer:
No it will not.
Will this fit century arms red army standard c39v2 tactical
Answer:
Yes this will fit, however, minor fitting may be required.
Will this fit a century arms vska?
Answer:
Yes
Will this fit on a Chinese mak 90?
Answer:
No, it will not.
Can it be installed on a Century Arms, SAR 3, 5.56 (.223) with out any modifications?
Answer:
Yes, it can.
Can it be installed on an AK-47 Saiga 7.62x39?
Answer:
No. The Saiga would have to be converted first to AK specifications.
Will this fit the Egyptian made AK-47?
Answer:
Yes it will.
Will this product fit on a romainian ak47?
Answer:
The ATI Strikeforce AK-47 Tactlite Stock and Forend Package is compatible with stamped receiver AK's such as the Romanian WASR-10.
Will this fit on a century arms RAS 47?
Answer:
Yes, the ATI Strikeforce AK-47 Tactlite Stock and Forend Package is compatible with the Century Arms RAS 47 AK. Please note minor fitting may be required for installation.
Hi, this item is compatible with an AK pistol? I have a Draco
Answer:
Installing a stock on your pistol constitutes manufacture of a short-barreled rifle. That requires approval from the BATFE and purchase of a $200 tax stamp prior to installation. That being said, it is possible to put a stock on a Draco. It requires a special adapter part which we do not carry.
Will this fit on the MAK 90 Chinese rifle without any modifications? Do I have to drill any hole on the rifle to get it to fit?
Answer:
No. The Chinese AKMs have a thicker receiver and the part of the stock that goes into the rear trunion will be too wide to fit your rifle. You can sand and/or file down that section of the stock to make it fit. You have to drill the holes for the stock screws to install this product.