AK-47 Strikeforce Elite Adjustable TactLite Stock
Features:
Six Position Adjustable Stock
Manufactured in the USA
Limited Lifetime Warranty
Fits: Most stamped AK receivers, will not fit milled receivers.
Will not fit the M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)
Note SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.
No Snag Points
Dual-Sided QD Attachment Point
Thin Scorpion Recoil Pad
Military Type III Anodized, 6061 T6 Aluminum
Six Position Commercial Buffer Tube
Aluminum Receiver Mount
Includes Steel Castle Nut, Steel Locking Ring, Steel TNut, and Steel Bolt
Mounting Hardware Included
DuPont® Extreme Temperature Glass Reinforced Polymer
TrakLOCK System:
Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
Provides Smooth Secure Stock Adjustments
Eliminates the Need for Secondary Locking Mechanisms
Removable/Adjustable Tactical Cheekrest:
Elongated Design to Fit All Users
Includes Short Cheekrest with ½" of Adjustment
Warning:
Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty
Note: This product is new and being closed out; sold "As Is" and is not returnable to Cheaper Than Dirt. Please contact the manufacturer for warranty and assistance.
Features:
Six Position Adjustable Stock
Manufactured in the USA
Limited Lifetime Warranty
Fits: Most stamped AK receivers, will not fit milled receivers.
Will not fit the M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)
Note SEC922R: ATI products are manufactured in the USA and count towards compliance parts. Contact your local gun shops or shooting ranges for this and other compliance issues.
No Snag Points
Dual-Sided QD Attachment Point
Thin Scorpion Recoil Pad
Military Type III Anodized, 6061 T6 Aluminum
Six Position Commercial Buffer Tube
Aluminum Receiver Mount
Includes Steel Castle Nut, Steel Locking Ring, Steel TNut, and Steel Bolt
Mounting Hardware Included
DuPont® Extreme Temperature Glass Reinforced Polymer
TrakLOCK System:
Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
Provides Smooth Secure Stock Adjustments
Eliminates the Need for Secondary Locking Mechanisms
Removable/Adjustable Tactical Cheekrest:
Elongated Design to Fit All Users
Includes Short Cheekrest with ½" of Adjustment
Warning:
Do Not Over Tighten Screws Stripped Holes and Broken Screw Heads are NOT Covered Under the Warranty
Note: This product is new and being closed out; sold "As Is" and is not returnable to Cheaper Than Dirt. Please contact the manufacturer for warranty and assistance.
Can it fit micro Draco ak pistol?
Answer:
No this will not fit.
Will this fit a m92p?
Answer:
No this will not fit.
Will this fit a MAK-90 square cut stamped receiver?
Answer:
Yes this should fit. Minor fitting may be required.
Will this fit palmetto ak47 ?
Answer:
It should.
Will this fit an M77?
Answer:
No this will not fit. The M77 accepts Yugo-pattern buttstocks. Try item # AKS-428-008. Minor fitting may be required.
Will this fit a helloup?
Answer:
No, this is designed for stamped receivers and is not compatible with pistol receivers.
Does this have a mil-spec buffer tube outer profile / will a kak blade 2 fit this a tube?
Answer:
No, this item includes a Six Position Commercial Buffer Tube and it will not fit a brace designed for a Mil-spec buffer tube.
Will this fit arsenal Ak 47
Answer:
Yes.
Does this fit the Century Arms RAS 47?
Answer:
Yes, it does.