The Arisaka Low Profile Bipod Mount replaces the stock sling swivel interface on Harris S-series swivel bipods with a minimalist Picatinny mount. Rotation limiters allow for approximately 15 degrees to either side for leveling, and the mount works fine with pod lock levers. Compared to an aftermarket Picatinny-to-sling-swivel adapter and the stock sling swivel interface, the Low Profile Bipod Mount reduces the overall height, weight, and bulk of the bipod. This new version features a quick disconnect latch that allows the user to quickly install and remove the entire bipod from a Picatinny rail. Installation/removal is done by loosening the canting adjustment, pulling the latch away from the Picatinny rail, and then sliding the mount (and bipod) on or off the rail. Once the bipod is positioned where you want it, release the latch, ensure it has seated in a slot in the rail, and then snug the canting adjustment back to your preferred tightness. Even a slight amount of tension on the canting adjustment will lock the latch in place, preventing it from moving. If you have a KeyMod or M-Lok rail system the Arisaka Low Profile Picatinny Rails for KeyMod and M-Lok are a perfect match since they add very little additional height and use three mounting screws for maximum strength and durability.

Specifications and Features:
Attaches to Picatinny Rail
Quick Detach
Low Profile
6061-T6 Aluminum (Base) and 7075-T6 Aluminum (Latch)
MIL-A-8625 Type III Hard Coat Anodized.
Compatible with Harris S-series swivel bipods including the S-BR, S-BRM, S-L, and S-LM
Weight: 1 oz
Length: 1.26"
Width: 1.20"
Distance from swivel axis to Picatinny rail: 0.62" (bipod hangs approximately 1/8" below Picatinny rail)
Requires a 1/4" socket wrench for assembly (tools not included).
Made in the USA

Note: This product is new and being closed out; sold "As Is" and is not returnable to Cheaper Than Dirt. Please contact the manufacturer for warranty and assistance.