Our M4 flattop receiver from Del-Ton utilizes high quality Anchor Harvey, Cero and Brass Aluminum Forging Enterprises forgings of 7075-T6 aircraft aluminum. It has M4 feed ramp cuts. The forward assist and dust cover are factory installed and the flattop rail is T-Marked to allow for consistent optics placement.
Specifications and features:
Forged 7075 T6 Aluminum
A3 Flat Top with M4 Feed Ramps
Hard Coat Anodized
Mil-Spec
Ejection Port Cover and Round Forward Assist
Right Hand Ejection
Interior is coated with dry film lube, over the anodized surface
Specifications and features:
Forged 7075 T6 Aluminum
A3 Flat Top with M4 Feed Ramps
Hard Coat Anodized
Mil-Spec
Ejection Port Cover and Round Forward Assist
Right Hand Ejection
Interior is coated with dry film lube, over the anodized surface
29 Ratings
First of all I wanted to
First of all I wanted to comment on how awesome CTD's shipping is. The item delivered earlier than the indicated shipping date. My reason for only giving 4 stars is that I had read review about how well the upper matches and fits other lowers. I assumed that since I had a del-ton lower, that this upper would be a perfect match. The finish on the upper is much darker than the lower, which means it's most likely better, but I figured they would be the same. There is also a little slop between the upper and lower, both from del-ton. I may just be picky, but I would figure that since they are the same manufacturer I would have received a bit tighter fit.Other than those two small things I think this upper is great for the price. It had no defects and when test fitting my barrel everything lined up perfectly, including the extended feed ramps.
February 2, 2015
Works great would buy aga
Works great would buy again.
January 12, 2015
This was my starting poin
This was my starting point for my first DIY AR-15. I'm running it currently with a palmetto premium BCG, magpul stock, ALG Defense Mil-Spec trigger (gieselle house brand). Stag Arms 1:9 16' barrel. With a Black Dawn Lower. Guns flawless, the upper has been perfect throughout several rail changes. Thousands of rounds fired. Fixed sights, scopes, red dots, micro red dots. It's strong and comes ready to build on. I will never recommend spending your money on any upper other than a Del-Ton Mil-Spec. Anything else is paying for a name or emblem.
January 11, 2015
I purchased this upper fo
I purchased this upper for my first AR build, I have had no issues with it and it has performed flawlessly and I'm planning on buying the same upper for My next upcoming build. I can honestly recommend it to anyone building a rifle.
November 11, 2014
No scratches or dings. Ma
No scratches or dings. Matches my lower good enough for my eyes and fits my broken arms milspec lower perfectly. Great price.
September 4, 2014
This upper fit like a glo
This upper fit like a glove to my stag arms lower. Couldn't be happier. Very smooth transaction with CTD as we'll.
July 21, 2014
This is a great priced up
This is a great priced upper for budget build and I haven't had any issues with this upper it matches up very well with my FMK polymer lower.
June 23, 2014
Mated this with a Mas Def
Mated this with a Mas Defense 10' pistol barrel and headed off to the range. Shot 100 perfect rounds. Everything worked and fit perfectly. The finish was consistant when put together with my lower, looks like they were made together. I would buy another if I needed one.
June 12, 2014
Great part, great price.
Great part, great price. As always CTD delivered on time and I was able to custom build a rifle on a budget as requested by a friend. Will definitely purchase again. Minor scratch on the left side, only reason it does not get 5 bullets.
May 25, 2014
I bought this upper based
I bought this upper based on the reviews of others. The delivery was quick as usual from CTD. It went together fine but the finish is not the best. It appears weak and seems to come off easily form normal use. I assume it is milspec and so some slop in the fit with another milspec lower is to be expected. However, mine was really sloppy and required a JP tension pin to make it fit correctly which added to the cost of the upper. I know they say it does not matter, but I will never be convinced that if your upper flops back and forth while shooting it you are going to have good groups. It violates the laws of physics. I will probably pay a little more for a better quality next time.
May 18, 2014
After reading other revie
After reading other reviews and going thtoughy build budget i ordered one of these to complete my rock river arms lower. I was worried about the quality because the price was so low... but when it arrived 2 days later it was not only pf high quality, but it perfrctly matched my rra lower and rail. Put 150 rounds through it in less that half an hour with absolutly no issues. Great buy. I know ill be buying anputh for my pistol build
May 17, 2014
This upper fit great on m
This upper fit great on my YHM lower for my .300 AAC Blackout that I'm building. Will buy another one for a 5.56 build that I'll be doing soon for my son.
March 11, 2014
Un-beatable for the price
Un-beatable for the price point an quality. I've not field tested it yet but for a run an gun and or a squirrel gun should be just fine.
March 6, 2014
Great upper, fit perfectl
Great upper, fit perfectly on my M&P lower. I will definitely buy more.
February 24, 2014
Bought two of these for m
Bought two of these for my first builds with extreme skepticism. They arrived and installed flawlessly. They are not range tested as of yet, but for the price you can't beat it with a stick. #truth
January 7, 2014
Great Upper At a Great Pr
Great Upper At a Great Price. And The Finish is Perfect. I used a DSA Arms M4 Barrel with M4 Feed Ramps. And it Performs Outstanding. Nothing Bad To Say About Del-ton..
December 24, 2013
It's better looking then
It's better looking then I thought it would be and fits quite well. I would buy again!
December 23, 2013
Got this in three days, f
Got this in three days, finished my build on the fourth day, and shot on the fifth day. Good quality, fit with all the other parts from different manufactures and performs well.
December 12, 2013
Great craftsmanship and q
Great craftsmanship and quality product
December 3, 2013
This Upper came with the
This Upper came with the finish inside looking thin in some areas and thick in others. This does not affect the function of the bolt, just looks like it is sloppy finish in the quality control.
June 28, 2013
Great fit and color match
Great fit and color match to my dpms. Also great shipping. Ordered and received the next day with standard shipping.
November 6, 2012
First of all, I experienc
First of all, I experienced a very smooth transaction and super fast shipping to lower Alabama. Secondly, this flat-top AR upper feels very durable and matches the shade of my Olympic Arms AR perfectly. I purchased this item to convert my carry handle upper to this style and it only cost me $50 to have a local gunsmith switch everything over. I've already put 200 rds down range and am very impressed with the quality and great fit to my lower. So far, there is no play between the two receivers and it is just as accurate as before. I definitely recommend this item. At this price, you can't beat it. Thanks CTD! Be safe and happy shooting, guys!
May 4, 2012
I've ordered several thin
I've ordered several things from CTD in the past and always been satisfied, but this exceeded my expectations so much that I was compelled to write a review, which I literally never do. On the product great fit and finish. IuFFFDve seen cheap uppers where the ejection port cover doesn't close just right. Not the case with this just as good of upper as you could pay twice as much for. Now for the part that blew me away....... the service. I ordered this part YESTERDAY morning, it arrived at my house at about 1:30 this afternoon. It was shipped from Fort Worth, which is about a 12-hour drive from where I live. I literately could not have driven to their store, picked it up off shelf and been home faster and this was standard shipping.Thank you Cheaper Than Dirt!!!!!!!
May 2, 2012
I was a little skeptical
I was a little skeptical when I first placed this order but it fit into my budget for this build. I was very pleasantly surprised when it arrived. Finish was perfect, fit was nice and tight with no gaps or rattles at all. Color matched my Spikes lower very well. I was very happy when I realized that the dust cover and forward assist were already installed, saving me some time on assembly without having to deal with those two pesky items. A good quality upper for a very reasonable price. I am already ordering another one for my son's build.
April 22, 2012
After reading some of the
After reading some of the reviews I was skeptical but I went with this upper anyway and I gotta say I am highly impressed with it. The finish was great and it mounted to my century arms lower and barrel flawlessly. Best bang for the buck in my book.
March 17, 2012
Well I was shopping aroun
Well I was shopping around and this fit my budget. I recived it today the 24th and hurried and put it on. I will test it out when i get the chance to. I dont know why 1 guy put 3, maybe he is a snob and doesn't know what a good cheap buy is or he needs to cry about something.
February 23, 2012
pros: good fit, solid upp
pros: good fit, solid upper receivercons: finish is very poorOver all its a good functioning piece. If you are going for looks, you may want to find a different brand.
November 1, 2011
For the price it looks gr
For the price it looks great and functions well so far, good finish and very lightweight, im probably going to purchase another for the next build. Thanks CTD for the 2 day shipping!
July 25, 2011
Very nice upper! I've pai
Very nice upper! I've paid more for lesser units. Finish is perfect! Fit is excellent! Can't believe this is the cheapest upper I could find! Bought it to build a carbine and Duracoat it, but it would be a shame to cover it up, gonna strip another rifle and replace it with this one and coat that other one. I'm very impressed! The coating is a nice flat black and the T marks are etched beautifully! Too bad I ran out of lowers... I'd buy more of these!
July 13, 2011
What is a "T" market upper?
Answer:
The 'T' stands for T-Marked or top marked. 'T' marked receivers have numbers laser engraved in every other groove in the top rail, so you will see T2, T4, T6, T8, T10, T12 written on top. This was for indexing purposes.
Can I replace the dust cover with a magpie one ?
Answer:
This upper is compatible with any standard AR15 dust cover including Magpul brand dust covers.
Can I use this with other caliber.300 or 6.8
Answer:
Yes you can.
Does this product include a BCG? And if so, is it a complete BCG?
Answer:
The BCG is not included.
Will this replace my upper on my S &W MP m4 that does not have forward assist or dust cover?
Answer:
Yes it will.