AIM Sports 1.5-4X30 TRI ILL. CQB MIL-DOT JTMR1 [FC-815879012982]

AIM Sports 1.5-4X30 TRI ILL. CQB MIL-DOT JTMR1 [FC-815879012982]

nan JTMR1

Out of stock

nan JTMR1

Power
1.5-4x
Parallax
Fixed
Ring Size
30mm
Objective Size
30mm
Color
Matte Black
Reticle Type
Mildot
Model
JTMR1
Illuminated
Yes
UPC Barcode
815879012982
This AIM Sports 1.5-4x30 Tri-Illuminated CQB Scope w/ Mil-Dot Reticle features a laser etched reticle that delivers in its function and precision. This rifle scope by AIM Sports is milled from a solid piece of aircraft grade aluminum, for a one-piece body that is then purged and nitrogen charged for fogproofing, and sealed up with weather resistant seals. The AIM Sports Inc 1.5-4x30 Tri-Illuminated CQB Rifle Scope has tri-illuminated (Red, Green, Blue) reticles with adjustable rheostat for brightness control. The AIM Sports 1.5-4x30 Tri-Illuminated CQB Scope with Locking Turrets will significantly improve your target acquisition speed and give you success on the field.

Features and Specifications:
Manufacturer Number: JTMR1
Magnification: 1.5X-4X
Tube Diameter: 30 mm
Objective: 30 mm
Eye Relief: 4" - 5"
Exit Pupil: 20 - 7.5 mm
FOV (feet at 100 yds.): 85 - 25
M.O.A.: 1/2
Finish: Matte Black
Lens Coating: Green
Battery: CR2032
Length: 10.75"
Weight: 21 oz
Milled from one solid piece of aircraft grade aluminum to withstand constant heavy recoil
Fog proof and shock-resistant housing
Nitrogen charged with weather resistant seals
Green fused multi-coated lens provides superior light transmission, resolution and scratch resistance
Tri-illuminated (Red, Green, Blue) reticles with adjustable rheostat for brightness control
Windage and elevation adjustment
4 - 5 Inch eye relief provides safety from heavy recoil and enables fast target acquisition
Weaver / Picatinny 1913 base mount with integrated tri-rails that accept most Weaver / Picatinny accessories
Laser etched reticle

9 Ratings
4 out of 5 stars
9 Ratings

Rated 5 stars by 0% of reviewers

Rated 4 stars by 100% of reviewers

Rated 3 stars by 0% of reviewers

Rated 2 stars by 0% of reviewers

Rated 1 star by 0% of reviewers

Rated 4 out of 5
It’s not the best but it’s come with Mounts, perfect for for less than 100 yards. I have not complains about the scope at all!
December 31, 2021
Rated 4 out of 5
It looks great on my db10
December 29, 2021
Rated 4 out of 5
Very Bad quality control
Globbed paint or grease all inside of tube.As well as a large hair or brush bristle. Some damage of lens coating on edges. Cons: Grease or paint smeared inside tube.Big hair too
October 11, 2019
Rated 4 out of 5
Right out the gate bad.
Waiting to see what return shipping costs.Big thick hair like a brush bristle in the tube. With any quality control it's as plain as day.
October 11, 2019
Rated 4 out of 5
Definitely better than I expected!
Initially, I was very skeptical of purchasing a scope from this particular vendor. I was more attracted to scopes on different sites with scopes up to $1000, but when I received this scope, I was amazed at its quality. It definitely costs way less than it's worth! The controls worked perfectly (though a little tight only because the package was left outside in the cold most of the day). I'm fairly new to my AR-15, so I think this new accessory will be a good starter! Also, other parts I got from here have come out great! Looking forward to using it tomorrow at our local range! Thanks, CTD!! :)
March 8, 2019
Rated 4 out of 5
Okay, not great.
Cane fast, but there is a finger print on the inside glass. Obscures the view. Disappointed.
February 3, 2019
Rated 4 out of 5
Easy to use
I was expecting to be pleased but not this much. The mounting was easy and sighting it in gave me confidence needed I can handle the scope in case things may not go as planned in the future. I thought it would be of a lower quality because of the price but it's not. Pros: Covers on both ends
October 25, 2018
Rated 4 out of 5
This is the perfect scope
This is the perfect scope for your AR, the cost is a lot less then so called higher quality scopes but the quality is equal to my Leupold VX-R 1.25-4x20 at 1/3 the cost
April 12, 2014
Rated 4 out of 5
I bought a different mode
I bought a different model of this scope a month ago at a gun show. The earlier one has a chevron-type reticle. When I saw CTD's WAY better price I decided to buy this second scope for the new .300AAC upper on my AR15. I have mounted the previous scope on a SIG 556. It is nothing short of incredible. Bright clear optics, locking turrets, the mount is one of the BEST I have seen on any scope. It's amazing for the price you get a wonderful ETCHED reticle with red, green AND blue illumination. Smooth action in the zoom and focus and after a very short time setting zero I was shooting 2 MOA at 100 meters. If I was using better ammo I am sure I'd have brought that down to 1 MOA. I was shooting Silver Bear 62 grain ammo, far from match quality, but it does the job. If there is a better scope out there for the price, I have yet to see it.
October 3, 2012
Will this fill a 308 MAR EXP LEVER Action ?
Answer: If you have a picatinny top rail installed on the rifle, it'll fit.
Will this fit theDB15 SSB?
Answer: Yes it will.
will this fit a rock river AR15?
Answer: Yes, this will mount to any standard AR15 with top picatinny rail.
Do I need any other gears to equip this scope or I can just mount this scope when I receive it?
Answer: This will mount right up to any AR-15
will this fit and be un-obscured by the front iron site on the delton echo 316M 5.56 Item #: 7-GRFTMC160 or will i need a riser
Answer: This will be partially obscured by a front sight, but you can still use the scope and do not need a riser. Most users do not utilize a riser.
I have a A2 front sight and carry handle rear site. I remove the carry handle rear . Will the scope work with the standard A2 in the way?
Answer: Yes, this scope will still work with the front sight in the way.
I have an m&p 15 sport 11 it's got the fixed front iron sight I have a riser to be able to go above that fixed sight so my sight isn't obstructed when sighting in will that be a problem ? Can adjust it going up and down and is it compatible with my AR or no
Answer: If you run a 3-9 or greater power magnified optic you don't need a riser. The optic will blurr past the front sight post in those magnification ranges. If you run this lower power option you will have to use a riser or higher rings to get an unobstructed sight picture.
With the lens covers flipped up, can I use a Bushnells Trophy TRS-25 red dot without the covers obstructing the line of sight/parallax of the red dot on top or will I need some type of riser for the red dot?
Answer: You can rotate the scope covers to the side to clear the red dot.
Can the mount be changed for rings that would allow use of backup sights?
Answer: No, it cannot.
does this come with the mount in the pix? also, can I mount this to 1" risers to be able to use the flip up iron sights on a Ruger AR556?
Answer: The mount is included. You cannot use the iron sights with this scope.
Will this mount to a Bushmaster QRC AR-15 5.56, web site item number 02545
Answer: Yes it will.