The six position side folding stock is fully adjustable allowing you to fire from any position including the folded position. Featuring the Scorpion recoil system which consists of a thin yet absorbent recoil pad, pistol grip with sure-grip texturing, combined together to reduce muzzle lift and minimize the felt recoil. Included are four picatinny rails, adjustable cheek rest system, three sling swivel studs, steel T-Nut and bolt; glass reinforced polymer construction.
ATI Strikeforce AK-47 Package Specifications and Features:
- Six Position Adjustable/Side Folding Stock
- Stamped Reciever AK-47 and AK-74
Can be Fired from Folded Position
TrakLOCK System
- Eliminates Horizontal & Vertical Movement of the Stock on the Buffer Tube
- Provides Smooth Secure Stock Adjustments
No Snag Points
Dual Sided QD Attachment Point
Scorpion Recoil System
- Scorpion Thin Recoil Pad
- Scorpion Recoil Pistol Grip
- Sure-Grip Texture
- Recoil Impact is Absorbed
- Reduces the Challenge to Reacquire the Target by Minimizing the Muzzle Lift
- Not Affected by Chemicals
- Remains Flexible in Extreme Temperatures
- Eliminates the Felt Punch of the Recoil
4 Picatinny Rails
- One 4" Picatinny Rail
- Two 2" Picatinny Rails
- One 2" Swivel Stud Picatinny Rail
Blank inserts for When Rails are Not in Use
Additional Ventilation in Forend and Top Cover
Removable/Adjustable Cheekrest System
- Elongated Design to Fit All Users
Slot for Tactical Sling Attachment
Drop Tube Adaptor for Use with Iron Sites
3 Sling Swivel studs
Includes Steel T-Nut and Bolt
DuPont® Extreme Temperature Glass Reinforced Polymer
Flat Dark Earth Finish
Manufactured in the USA
Manufacturer Number - B.2.10.1250
Fits
10 Ratings
So far so good! Looks awesome and feels comfortable!
December 20, 2022
I would buy it again.
It was easy to install and light weight. Made my ak74 easier to accessorize
October 11, 2022
Recommended for the price.
Works great. Definitely had to do some adjusting to the pieces to get them to fit right, but once they were on it all worked very well. Put 200+ rounds with it on my vska and it was all comfortable. The adjustable stock was very good for me and my friends to quickly adjust and fire. Stock needs a better pad, but that is easily remedied. The hand guards did get very hot at one point, but they didn't melt or warp.
November 2, 2021
Nice stuff
Better than reviews say. Very nice high quality easy to install.
August 8, 2021
Okay for the money
Poor instructions and fit of the components especially the forward handguards
September 19, 2019
Great Value and Improved Performance
Highly recommended Pros: Great value-ergonomically correct
July 25, 2019
Great once installed
Only used this twice,so far great. But unless you're a semi-gunsmith,for Me it was difficult to install. Each piece had to be customized. So much so,I had to take it to a gunsmith to finish. But the finished product is good.
September 16, 2017
First off , Im not a lett
First off , Im not a letter writing kinda guy. But this kit worked perfect on my WASR 10. I had the wood but wanted to update it. It was a lot of fun too, once I got started I couldnt stop. Fit and finish was excellent. I wanted to be sure it would work so i called and the technical team said it would and they were spot on!
January 9, 2017
Put this on my AK and it
Put this on my AK and it made a world of difference. It made the rifle much lighter and more comfortable to shoot. I was uncertain about the polymer rails, but after 500 rounds through the rifle my aim point is still dead on. I will definitely get a few more of these for my other AKs
October 18, 2016
The stock fell apart afte
The stock fell apart after 60 rounds or so. It's also lose it wants to wiggle around up, down, left, and right making it difficult to control when shooting. The collapsible stock must always be collapsed because the folding section of the stock is massive everyone who fired my ak agreed it was a poor design. The grip, while ergonomic, must be torqued often. and the screws that hold the rails on barely have threads on them to hold the rails in place causing them to fall off.
May 18, 2016
Will this fit Pioneer arms ak 5.56?
Answer:
Yes this should fit. Minor fitting may be required.
Does it fit a micro Ak ?
Answer:
No. It will not fit a Micro Drako
Would this fit a psak47 gf3?
Answer:
It depends on which GF3 you have. It will not fit the folding stock versions.
Will this kit fit my Zastava AK47 M92PVO?
Answer:
No it will not.
Will this work in my PSA AK47?
Answer:
PSA makes more than one variant of AK. If your AK has a standard stamped receiver and a fixed stock, then this will fit. Please note, minor fitting may be required.
will this fit a MAADI stamped receiver/thumb hole grip?
Answer:
If you have a standard stamped receiver, then this should fit. If you have a slant cut receiver, then this will not fit. Please note, minor fitting may be required.
Will this fit a zpap85?
Answer:
No it will not.
How much modification is needed to put this on a Norinco NHM91?
Answer:
The handguard will require very minor fitting. Most NHM91s have slant cut receivers and the stock will not fit. However, if you have a standard stamped receiver, then the stock/pistol grip should fit with only minor fitting.
Can you put a foregrip on the bottom rail?
Answer:
There is a 2" picatinny rail on the bottom of the handguard for mounting accessories such as a foregrip to.
Will it fit the m70ab2 ?
Answer:
No this will not fit.
I know the stock and pistol grip would fit but would the hand guards fit on a JTS M12AK?
Answer:
No this kit will not fit. The JTS M12AK uses proprietary furniture.
Will this fit vska ak47 trooper?
Answer:
Yes it will. Some fitting may be required.
Will it fit Chinese 386 model?
Answer:
No this will not fit.
Will this fit a century arms ak?
Answer:
Century Arms has more than one variant of AK. If your model is setup to accept stamped AKM furniture, then this should fit. If you would like additional assistance you can reach our product techs Monday thru Friday from 8am to 5pm central time at 1-800-421-8047 or by using our live chat feature.
Would this fit a nornico 56?
Answer:
Yes this should fit, however, minor fitting may be required.
Will this fit a pioneer arms AK-47 thanks ?
Answer:
If you have the pistol variant, then the stock will not fit. However, if your model has a standard stamped receiver, then this should fit. Please note, minor fitting may be required.
Will it fit a Radom AK-47 polish made?
Answer:
There is more than one variant of the Radom AK47. If your model is a pistol or has an underfolder or a sidefolder stock, then the buttstock will not fit. If your model has a standard stamped receiver, then yes this should fit. Please note, some minor fitting may be required.
Will this fit a ak-74?
Answer:
Yes, this will fit most AK74 models, but minor fitting may be required. However, the stock will not fit the AKS74 and AKM74 models.
Was it fit on a palmetto AK47?
Answer:
Yes it should. Minor fitting may be require.
Will it fit zastava serbia npap m70 without modifying?
Answer:
No it will not.
Upon adhering to ALL Federal and State requirements and securing the neccessary Federal Tax Stamp from the Bureau of Alchohol Tobacco and Firearms (ATF), would this item then be compatible with the SBR Hellpup AK-47 manufactured by Pioneer Arms?
Answer:
Yes it would fit.
Will it fit a Ak47 Romania?
Answer:
Yes it will. Some fitting may be required.
Will this fit a hellpup?
Answer:
Adding a stock to the Hellpup without the ATF approval and a tax stamp would create a regulated SBR (short barreled rifle) in federal violation of the NFA. You may want to consider adding a pistol brace instead.
can this fit on a polish AK 47 hell pup pistol ?
Answer:
Adding a stock to the Hellpup without the ATF approval and a tax stamp would create a regulated SBR (short barreled rifle) in federal violation of the NFA. You may want to consider adding a pistol brace instead.
Hey boss man I have RomsArms WASR-10 AK-47 while this furniture set fit a WASR-10?
Answer:
Yes it should. Minor fitting may be require.
Does it fit a vska 47 ?
Answer:
Yes it should. However, some minor fitting may be required.
Will this fit a Century c39v2 without modification?
Answer:
Yes it will.
Will this fit a centurion 39 sporter?
Answer:
While the forend and pistol grip would fit the stock would not. The C39 uses a proprietary tang.
Will this fit aCentury Arms WASR-10 V2 AK-47?
Answer:
Yes it should. Minor fitting may be require.
Will this fit the Romanian Draco Mini?
Answer:
No it will not.
I am a left handed shooter. Is there a way to make it fold right? Or is there any product that is made for lefties?
Answer:
This item can only fold to the left.
Has anyone tried this on a century ras47?
Answer:
Yes, lots of people have. It'll work just fine.
Will this fit a Midwest Tactical AK-47 ?
Answer:
This item should fit your rifle. Please note minor fitting may be required.
Will this fit the JTS ak 12
Answer:
The pistol grip would, but the forend will not and the stock requires an adapter to interface with the rear trunnion
Will It Work & Fit On A Century Arms AK 9 Wasr-M
Answer:
Yes it will, fitting may be required
Will this fit a zastava m70 zpap?
Answer:
No it will not.
Will this fit a century arms vska 7.62x39 AK-47?
Answer:
Yes it should, minor fitting may be required
Will this fit a Saiga 308/7.62x51
Answer:
Not without being converted first
Will it fit a Arsenal sam7sf?
Answer:
No it will not, this stock kit is designed to fit stamped receivers.
Will this fit a wasr 10?
Answer:
Yes it will.
Will this fit a Polish tantal WZ.88?
Answer:
It is compatible but may require minor fitting for installation.
will this fit an Interordiance with front sling attachment?
Answer:
Yes it should fit, some fitting may be required.
Will this fit on riley defense rak47 cal 7.62*39?
Answer:
Yes it will.
Will this fit a century arms nak9 with a stamped reciever
Answer:
This stock is not compatible with pistol receivers, but the handguard is compatible.
Will This fit the pioneer arms ak47 sporter
Answer:
Yes
Will this stock and hand grip fit a PSA AK-47. With the tactical rails
Answer:
Yes
Will this fit a saiga ak47 made by izhmash?
Answer:
The stock and grip will.
i have a century arms ak 47 39v2 it says milled not stamped so it wouldnt fit right?
Answer:
This will fit the C39V2
Will this fit a normal size Draco ak47 pistol
Answer:
No it will not.
Will this fit my century arms ak-47?
Answer:
While this fits many of the AKs imported and made by century, it does not fit a number of them.
Will it fit a zastava npap m70? Thanks
Answer:
No it will not. Item STK-428-027 will fit.
Will this fit my Arsenal SLR-107R?
Answer:
Yes it will.
Will this fit an SA-93?
Answer:
No. The SA-93 is a milled-receiver AK, try item AKS-024-002
Will this fit a zastava pap m77
Answer:
No. Item 9-296139 will fit the Yugo-pattern AK.
Will this work with a mini Draco?
Answer:
No.
I just bought a Century Arms with a fixed stock will this fit? It does not have a pinion currently.
Answer:
It will probably fit. This will not fit any Yugo-pattern guns made in Serbia.
Would this fit on a PSAK Palmetto State Armory AK? Thanks
Answer:
Yes it will.
Will this work for vska
Answer:
Yes it will.
Would this fit nornico Chinese mak 90?
Answer:
No, it would not.
Woukd this fit an AK 74?
Answer:
Yes it will.
Will this fit a WASR-10?
Answer:
Yes it will.
Does this fit milled receivers?
Answer:
This is for stamped receivers.
I just bought a i.o sporter ak-47 will this fit it I'm new to the ak-47 never had one
Answer:
Yes, it should fit.
Will this kit fit a Maadi Egyptian AK 47?
Answer:
Yes, it will.
Can a side mount for optics still be used with the stock folded ????
Answer:
Yes, it can.
Will this fit a Hungarian AMD 63 AK-47
Answer:
Yes, it would.
Will this fit a I.O AK247-C without modifications?
Answer:
Yes it will.
I have a century arms ras47 ak 47 would this fit on my gun
Answer:
Yes it will.
Will this fit on an arsenal slr-107r?
Answer:
Yes it will.
Will this fit on an arsenal slr-107r?
Answer:
Yes it will.
Will this fit on an arsenal slr-107r?
Answer:
Yes it will.
Will this fit on an arsenal slr-107r?
Answer:
Yes it will.
Is this for a milled receiver?
Answer:
This is for stamped receivers.
Can it be used on an AK-47 Saiga 7.62x39?
Answer:
No. The Sagia would have to be converted first to AK specifications.
Is the front sling attachment removable?
Answer:
Yes, it is removable.
Will it fit a century arms ras47?
Answer:
Yes it will.
will this fit a npap m70 ?
Answer:
No it will not fit your M70. If you want a rail system I suggest item# AKS-276-002. If you want a butt stock I suggest item# AKS-17-003
Will this product fit on a 1994 Norinco MAK-90, with a stamped receiver?
Answer:
The Chinese Norinco AKs use a thicker receiver sheet metal than standard. This will fit a MAK-90, but this stock, and every other stock we sell, does require you to remove material on the stock to insert into the thinner MAK trunion.