![RCBS .40 S&W/10mm Auto Carbide Die Set w/ Sizer, Expander & Seater [FC-076683221155]](https://cdn11.bigcommerce.com/s-onk2ymsnus/images/stencil/1280x1280/products/11249/1543269/64411__30858.1718240327.jpg?c=1 "RCBS .40 S&W/10mm Auto Carbide Die Set w/ Sizer, Expander & Seater [FC-076683221155]")
Intended for reloading .40 S&W/10mm straight-wall cases, the RCBS three-die set consists of a Carbide Sizer Die with decapping unit, Expander Die and Seater Die.
The Sizer Die re-shapes cases to correct cartridge dimensions and removes the primer. The Expander Die expands the neck to accept the bullet. The Seater Die taper-crimps to secure the bullet as it is set into position.
All dies have large, easy-to-adjust hex-lock rings. Each set is constructed from case-hardened steel, precision-drilled, reamed, polished and hand-inspected twice before leaving the factory. Also included with the set are a plastic storage box and loading data table.
Engineered to the highest standards and manufactured to the tightest tolerances, RCBS dies can be counted on to produce consistent and reliable results for shooters who demand reloads equal to the quality of their firearm.
Features and Specifications:
For Use With Straight-Wall .40 S&W/10mm Auto Cartridges
Standard 7/8"-14 Threads
Material: Steel
Includes:
Sizing/Decapping Die
Expanding/Belling Die
Seating/Taper Crimp Die
Instructions
Warranty Card
Plastic Storage Case
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Item#: RELOAD-17-074
The Sizer Die re-shapes cases to correct cartridge dimensions and removes the primer. The Expander Die expands the neck to accept the bullet. The Seater Die taper-crimps to secure the bullet as it is set into position.
All dies have large, easy-to-adjust hex-lock rings. Each set is constructed from case-hardened steel, precision-drilled, reamed, polished and hand-inspected twice before leaving the factory. Also included with the set are a plastic storage box and loading data table.
Engineered to the highest standards and manufactured to the tightest tolerances, RCBS dies can be counted on to produce consistent and reliable results for shooters who demand reloads equal to the quality of their firearm.
Features and Specifications:
For Use With Straight-Wall .40 S&W/10mm Auto Cartridges
Standard 7/8"-14 Threads
Material: Steel
Includes:
Sizing/Decapping Die
Expanding/Belling Die
Seating/Taper Crimp Die
Instructions
Warranty Card
Plastic Storage Case
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Item#: RELOAD-17-074
Intended for reloading .40 S&W/10mm straight-wall cases, the RCBS three-die set consists of a Carbide Sizer Die with decapping unit, Expander Die and Seater Die.
The Sizer Die re-shapes cases to correct cartridge dimensions and removes the primer. The Expander Die expands the neck to accept the bullet. The Seater Die taper-crimps to secure the bullet as it is set into position.
All dies have large, easy-to-adjust hex-lock rings. Each set is constructed from case-hardened steel, precision-drilled, reamed, polished and hand-inspected twice before leaving the factory. Also included with the set are a plastic storage box and loading data table.
Engineered to the highest standards and manufactured to the tightest tolerances, RCBS dies can be counted on to produce consistent and reliable results for shooters who demand reloads equal to the quality of their firearm.
Features and Specifications:
For Use With Straight-Wall .40 S&W/10mm Auto Cartridges
Standard 7/8"-14 Threads
Material: Steel
Includes:
Sizing/Decapping Die
Expanding/Belling Die
Seating/Taper Crimp Die
Instructions
Warranty Card
Plastic Storage Case
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Item#: RELOAD-17-074
The Sizer Die re-shapes cases to correct cartridge dimensions and removes the primer. The Expander Die expands the neck to accept the bullet. The Seater Die taper-crimps to secure the bullet as it is set into position.
All dies have large, easy-to-adjust hex-lock rings. Each set is constructed from case-hardened steel, precision-drilled, reamed, polished and hand-inspected twice before leaving the factory. Also included with the set are a plastic storage box and loading data table.
Engineered to the highest standards and manufactured to the tightest tolerances, RCBS dies can be counted on to produce consistent and reliable results for shooters who demand reloads equal to the quality of their firearm.
Features and Specifications:
For Use With Straight-Wall .40 S&W/10mm Auto Cartridges
Standard 7/8"-14 Threads
Material: Steel
Includes:
Sizing/Decapping Die
Expanding/Belling Die
Seating/Taper Crimp Die
Instructions
Warranty Card
Plastic Storage Case
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Item#: RELOAD-17-074