Welcome to the NEW Cheaper Than Dirt online store! Same great prices and availability, now optimized for your mobile phone!

Yankee Hill Phantom 5.56mm Compensator Suppressor 5 Port Design

 
Yankee Hill Machine
YHM-28-5C2
816701013634
ARR-2852
Ships from Warehouse 1
Typically ships the same business day when ordered before 4pm CST.
$28.50
Add To Wishlist Tell A Friend
Can we ship this to you?
  • DESCRIPTION
  • REVIEWS
The Phantom Flash Suppressor has been designed to work as a muzzle compensator while maintaining excellent flash hiding capabilities. This 5 port design has no downward facing port which helps eliminate dust problems when shooting in the prone position. The 5C2 features an aggressive front end used in hand to hand situations. For 1/2-28 threaded barrels only. Includes crush washer.

For warranty information, please contact:
Yankee Hill Machine Co, Inc.
20 Ladd Avenue, Suite 1
Florence, MA 01062
1-877-892-6533
service@yhm.net 

Item#: ARR-2852,2-YHM-28-5C2,7-YHM285C2
Total number of Reviews: 19

Submit a review

5.0 5
"Looks absolutely evil on a Sig 556. Completely kills muzzle flash. Installation wasn't too bad, but to tighten it down the whole way you either need a vise or a strong friend with nothing better to do."
– CJ
5.0 5
"good all around...looks goodgood at flash suppressiongood breakand you can poke stuff with it for all of you that have 16\" barrels and bayonets don't fit right"
– Rob
5.0 5
"I installed this on a Rock River pistol upper with a 7.5 inch barrel that I plan on taking to the sand box. I was easily able to install this compensator with the use of a vise. The barrel bushing requires you to compress it, to rotate it inward to seat the compensator properly. Note that the gas ports need to face upward. All in all when comin around that corner, this may make all the difference."
– Gstring
5.0 5
"It took about 30 seconds to swap this out. It's well worth the money and little bit of time. It looks and works better than the stock suppressor on my S&W M&P 15. Good product!"
– Brian
5.0 5
"Super sharp looking to say the least! Be sure to use the supplied NEW crush washer. Intimidating looks and the finale' for my \"home brew\" carbine! You won't be disappointed!"
– AirRepair2
5.0 5
"Fit my Del-Ton just fine. Very mean Look."
– EZ
5.0 5
"Looks to kill! It installs less than a minute. YHM makes great products and this a good example. Looks 100 times better than stock."
– Bandit
5.0 5
"Instantly improves the look of my SU-16C. Installed and took it out to shoot close to dusk and had no muzzle flash."
– CB
5.0 5
"Well made, works well, looks mean. Worth every penny, and it cost a lot less pennies than at the gun stores. Thanks CDT!"
– Heska45
5.0 5
"It arrived fast and installed easy. With this you will never need another flash supressor. Well worth the money. Thanks, CTD."
– Volz1911
4.0 5
"After a long debate with myself, got this one over the overpriced MICOR flash suppressor, which CTD does not carry, although it looks a lot cooler and maybe works even better. I can't complain, this looks great and should work well for a long time. Compliments my SU16."
– K.R.
5.0 5
"This is a high quality item. It installed very easy and took only 15 minutes. The addition of this flash suppressor will instantly increase the \"bad-ass\" value of your rifle. It looks amazingly mean and gives your rifle a look of \"I mean business!\" Buy this suppressor, install it, and you will not regret it. The strike bezel looks mean, but also can be used as a weapon if need be."
– Z.S.F.
4.0 5
"I love the look of this thing in my Kel-Tec SU-16. It took a while to get it put on. After screwing it on and tightening it with a wrench, I still had about 270 degrees to go (probably would have helped if I had a vice). I did some research, and ended up sanding the crush washer down because of the advice of some others. I finally got it in the right position and nice and tight."
– TS
3.0 5
"Bought this thing to replace standard A2 flash hider on my new LWRC M6A2. It looks awesome, but I had the same problem as everyone else with tightening it. I gave it 3 stars instead of 5 due to the fact that its stupid hard to tighten."
– Drew
4.0 5
"It looks awesome and has almost no noticeable flash, but it is really loud. It didn't seem that bad when I was shooting, but I stood behind my friend shooting with it and I was shocked at how loud the gun was with it. My friend's wife said it rattled the windows in their house and we were 200 to 250 yards away from the house shooting."
– Drew
5.0 5
"The flash hider is great."
– doss
5.0 5
"Had no problem mounting. It was tight but I did it by myself with a wrench. I did have to spin it 360 degrees after it was hand tight, but it wasn't hard."
– Rebelz71
5.0 5
"I had same problem putting this onto my Kel-Tec SU-16 that the other review noted, but I noticed that I'd put the crush washer on the wrong way... I flipped I over and it fit perfectly. Hand tightened followed by a quick hit from a wench and its secure and perfectly alighted. I agree it is loud, but it works to kill the fireball that I used to get out of the muzzle."
– Mitch
4.0 5
"As other reviews have implied, this is mean looking device to put on the end of your AR. Also like other have implied, installing it was a bit difficult. The hardest part was getting the crush washer to crush. I found a way around that by heating up the washer with a torch until it was more pliable. Then I put the device on until it was in almost the correct position. Once the washer cooled, I pulled the compensator off, put some thread lock on it, and tightened it down to its final position. The washer holds it in place, and the thread lock gives me the added feeling of security that it will not come off."
– JW