Welcome to the NEW Cheaper Than Dirt online store! Same great prices and availability, now optimized for your mobile phone!
| Next

AR-15 A3 Detachable Carry Handle Black Leapers UTG Version 6 Match For Flat Top Upper Receivers

 
Leapers UTG
MNT-950
4712274521940
ARR-119
Ships from Warehouse 1
Typically ships the same business day when ordered before 4pm CST.
We regret that this item is not available at this time.
Can we ship this to you?
  • DESCRIPTION
  • REVIEWS
AR-15 A3 detachable aluminum carryi handle and A2 rear sight.
Precision windage and elevation adjustments.
Will fit all flat top AR-15 type rifle and carbine receivers.
Matte black finish.
Imported.

Weight: 9.3 ounces
Length: 6.7 inches
Width: 1.8 inches
Height: 1.9 inches
 
Total number of Reviews: 72

Submit a review

4.0 5
"When i ordered this handle i was skepticle. But to my suprise it was everything they claimed and then some. The quality is great and compaired to heavy handles i think it takes more abuse. Unmounting and remounting changes nothing to your set. All and all great handle great price."
4.0 5
"CTD ships two different Carry handle sights listed under this part number. One has the 6/3 marking and is the superior one, the other one does NOT have the 6/3 mark. It's been hit or miss with which one I've received in the past, however CTD seems to be shipping the better one more consistantly now, I hope they continue to do so (hint). I recommend this product, from CTD, to AR15 owners."
4.0 5
"I didn't expect this quality at such a low price. Most \"name brand\" carry handles will run $100 (or more, like the LMT rear sight I was considering). Are they worth it? I couldn't tell you. I can tell you that this bolted right onto my flattop M4 and required only minimal adjustment to get zeroed at 25 meters. Until I purchase optics, this will do the job nicely. (I own three Leapers/UTG products and they're all quality.)"
1.0 5
"This handle appears to have ok quality. It will NOT handle harsh recoil. The rails broke clean off when after 20 rounds on my .50 Beowulf"
4.0 5
"the quility is great the fit is also fantastic! i have a olympic armsupper and it fit very nice, the color on it was the same thru-out. itis also the utg brand with the 6/3 on the elevation dail. the flip sight inthe rear works smoothly. for the money you can't beat this product. italso holds it's zero!"
3.0 5
"looked great when i got it out of the box but when i put it on my stag arms model 3 i found it jiggledon the upper receiver"
4.0 5
"Works well on flat-top M4. Fits tight and has the standard 6/3 markings.May be from China, but who needs to pay $100 for a carry handle?"
4.0 5
"This thing is good. It attached to my dpms with no problems and it accepted my scope rail. AWESOME"
5.0 5
"I bought this for my new M4 build and it fits my RRA upper perfect. I am very pleased with this money saver!"
5.0 5
"Decided to mount my ACOG on a carry handle instead of flat top of my M&P. I can't say enough good about it. Rock solid and durable. UTG makes good products and this continues the tradition."
4.0 5
"I bought this carry handle for my Stag Arms model 2...it locked on securely and easily! It is a sturdy piece and is good quality for the price!"
3.0 5
"In all seriousness, this carry handle works alright, but go the extra mile and buy one from rock river or an actual ar-15 manufacturer. When I zeroed this on my RRA Entry Tactical at 25 meters, I had to give it 8 clicks up and 13 clicks right. The clicks it makes when you twist the knobs for elevation and windage just sound cheap too."
1.0 5
"spend the extra cash and get one that actually fits on a picatanny rail.... this one flew off and hit me in the face!!"
5.0 5
"This is perfectly fit to my RRA AR15 A4. Easy to install, I love it for a change look to my AR15 with the price I paid for. Thanks to CTD for a lightning shipping."
4.0 5
"This carry handle a little to small to fit your hand BUT for the look and the sight this is a very good dealprice can easy be a lot more"
5.0 5
"Bought this for my M&P-15, appears to be solid and well made and its paint job matches that of my M&P-15. I have yet to take it to the range but all seems well. I highly recomend this carry handle."
5.0 5
"Matches my AR-15 perfect, fit and finish! Ready to go right out of the box. You will not find a better deal anywhere for the money. This could even be better than some hundred dollar ones I'v used in the past. Do what I did and just buy one, you'll be glad you did."
4.0 5
"I have been look for a carry handle for my bushmaster for some time. I have looked at all the manufacturers for quality and price. This has both. This looks like the one on my M4 that I use in the Army. The elevation knob is a little stiff, but works well and I can tell it just needs a little breaking in. Take it from a guy who works and uses M4s all the time this is a quality product for you AR-15."
5.0 5
"Nice handle for the price. Heavy gage metal, nice finsh, good parts."
5.0 5
"A Very High Quality Removeable Carry Handle. The Price Is Great Compared To The Overpriced Name Brands. I Use These On My Rifles And Also Sell In My Store. No Disappointment Here."
5.0 5
"This is a great product for the money. Of course there are nicer one but they cost twice as much. I bought a DPMS flat top and installed this carry handle on it the first day for the rear sight. I have fired over 1,000 rounds and this handle/sight has not loosened at all! Affordable and practical product from UTG. Buy with confidence."
4.0 5
"Figured for the price it was a reasonable gamble, didn't want to spend $90+ for a handle. Haven't had any problems as far as adjusment nobs or sturdiness. Tighten the mount screws and forget about it. Haven't used it for targeting yet. I don't have a front iron sight. I use my holo sight for targeting."
4.0 5
"For the price this item is great, only flaw on mine is the rear sight part is slightly rotated left. Easy to compensate thou. It is worth getting"
4.0 5
"Great product for the money. Mounted quickly and like a rock, to my bushmaster flat top. Peep sights and adjustment nobs are strait and easily adjustable. Would have got 5 bullets but it is a little on the heavy side. Shipping was fast and on time. CTD does it again, Thank You."
4.0 5
"So I'm only giving this carry handle 4 bullets because I've yet to go out and test fire with it. It seems sturdy, and best of all its not sharp around the edges, as to not scratch up your gun. Seems like this'll get the job done."
3.0 5
"For the price, you can't beat it. Pros: Inexpensive, seems to mount well, doesn't seem to scratch up rail or receiver, and the sights are actually not that bad. Cons: The height and windage adjustment knobs are RIGHT next to each other, big fingers beware. The rail LOOKS like its not latched on both sides, but it is.. I shook it hard enough to break a pivot pin. (No worries, I didn't actually break anything)The rail knobs are a bit big, I understand this is for maximum torque when wrenching down on them, but a screw might have sufficed. Use a TINY bit of \"Lock-Tight\" on the threads before you tighten it down. That'll help it hold a little better. All in all, for the price I like it. Its definitely NOT like the ol'A2 handles.. but it'll get the job done."
4.0 5
"I purchased it to go on my S&W M&P 15-22. (I like the looks of a carry handle on an A.R.) It fits nice and tight. The elevation knob, when all the way down, doesn't lock in it's bottom position. But as soon as I turned it up, it starts to click and holds it's position. Other than that, I see no problem with it. As far as price, great price for a sight that goes on a .22 plinker!! Would even trust it on my 5.56mm. P.S. as my good friend would say, \"TOYS,TOYS,TOYS!\". Thanks CTD for the \"TOYS\"!"
4.0 5
"Not bad at all. The only thing I don't like is the sights slant a little bit when looking at it from the top, but in no way effects the impact. Do your self a favor and buy these and save a little money."
5.0 5
"Well, I got this to put on my Archangel 10-22 stock. It pretty much kicks ass. I had an old Colt A2 on their before to compare and there's no difference to me. The windage/adjustment knobs are a little stiff, but it'll break in with some use.This is obviously not the exact same thing as the expensive ones but for the price, I have to give it 5 bullets. If anything ever does go wrong with it, you have to remember it's cheap."
5.0 5
"Excellent quality unit, glad I 'cheaped' out and did not overspend. Visibly indistuingishable from my Bushmaster handle. Highly recommended."
4.0 5
"This is an excellent carrying handle. Very solid, mounted easilyand will not come off. I am happy with this purchase. I am afirearms instructor and know my way around an M-16/AR-15 andthis handle compares favorably with DPMS or Bushmaster. I wouldreccomend this handle to anyone looking for a quality, reasonably priced handle."
5.0 5
"got my detachable sight today.. very high quality that i would expect on much more expesive units.. do yourself a favor and buy this handle..."
5.0 5
"The first one I ordered was bent, but it was quickly replaced and I'm happy as can be with it. Very sturdy, not flimsy or cheap-looking at all. Would definitely recommend it to friends."
5.0 5
"Just got this for my flattop AR/M4. Coloring isn't great, half painted and half a different color. Definitely 100% Effective. I thought we'd be sighting in for a while out of box, but it was 100% on target with the first shot(s) at about 75 yards. Sights were dead on."
5.0 5
"Great service fast shipping and best of all an accessory that's reasonably cheap but very effective. Unit fit my AR like a glove and matched. Only downside is that the clicks sound very cheesy but for the price I can't complain."
3.0 5
"Decent looking carry handle, coloring is ok. The one I received had a small imperfection there was a manufacturing mark on the sight. I will not be using it as the main sight but as a backup."
5.0 5
"There should be no whining about this carry handle, it is Mil-Spec all the way. Nice product and it fits well on my Yankee Hill upper receiver. Don't hesitate to buy this handle. If you go for a $70 to $120 product you'll just be getting yourself ripped off."
5.0 5
"I purchased this carry handle on 5/5 at 1:51pm and received my confirmation that it had been shipped at 2:00 pm, and i received my carry handle at 2:00 on 5/6. I am very happy with the product also it is heavy duty, everything works as it should, it fits on my hi standard perfectly, there is a very very slight difference in color, not enough to even notice. As always CTD delivers another great product, lighting fast."
5.0 5
"For those old school folks like me out there, who much prefer the AR's with no bells and whistles on them. This is a must-buy! Fits perfectly on my DPMS Lo-Pro, and goes very well with UTG's detachable front sight post."
5.0 5
"Best thing I've bought in a while!"
4.0 5
"This handle mounted easily on my RRA LAR-15. Only took a few seconds. Took just about the same amount of time to get it sighted in. I think I shot three rounds and was dead on at 80 meters! I shot an additional 100 rounds and the handle stayed tight and accurate. Great for the money."
5.0 5
"I was a bit skeptical about how well it would perform being detachable, but to my suprise it works fantastic. Can shoot accurate as far out as you can see. Would buy again for another flat top."
5.0 5
"Bought this for my dads flat top M&P 15. Works great. We have bought several of UTG's products and I have always been satisfied."
4.0 5
"I ordered this wondering what I was going to get for my money. I got it today put it on my DPMS AR and it looks great and fits great. Good deal and fast shipping."
4.0 5
"For the money it is a pretty good deal. The sight handle was mounted on a DPMS M4 (.223). I have had for a while now and am ok to write the review. It locks in tight and sturdy. It took only a few rounds to sight it in where I like it. It does, however, have a poor finish. Like I stated though, for the money it is a pretty good deal."
4.0 5
"No optics on my home-built Del-Ton, this seems to function as well as the stock sight on the M4 I carried in Afghanistan. For this price, a good deal."
4.0 5
"Love this. Was fast to sight in. Only gripe is that the peep holes are either really small or very large. But still, for quality, very nicely made. Matched up to the gun. Couldn\uFFFDt be happier."
5.0 5
"I bought this handle for the rear sight. It tightens on in a snap. I also bought a scope to mount on the handle. It works great together with the A2 rear sight. It makes it easy to sight in."
5.0 5
"Yet again, UTG has made an amazing product and yet again, CTD got it out fast and cheap. An amazing product. Complete Mil-spec: it can't get any better than this."
5.0 5
"Slapped this good looking baby on my CMMG upper. Sighted in pretty easy. You can't go wrong. Another amazing CTD accessory."
1.0 5
"You think you get what you pay for but in this case you get much less. Poor quality soft material sloppy sights and the entire handle slants to the right. Save your money and put it toward an American made carry handle. I know they are upwards of 100 bucks or more but how much is it worth to have sights that can potentially make the difference between life and death. Zero bullets if it was an option. By the way if you like junk handle's get the 29 dollar one, its the EXACT SAME THING!"
5.0 5
"Fast shipping, great price, and this product exceded my expectations ,from reading the other reviews, the material of this product is very tough - makes you feel as if it came with the gun! Bolted on my AR-15 and sighted within 2 mins . Very good product will be buying more of utg"
4.0 5
"For price and fit, you can't beat this carry handle."
5.0 5
"I bought this sight for my MMC M4. It fit good and tight and was quick to sight in. The adjustments have good positive clicks and the sight holds zero after being removed and replaced. You can't go wrong with this sight. Shipping was faster than expected. Very satisfied customer!"
4.0 5
"I purchased several items for my DPMS LowPro from CTD on 5-18 in the P.M. / I recived all items on 5-21/ As always CTD has superfast shipping. The LowPro is a flattop with no bells or whistles and has a heavy barrel. I wanted to give mine the classic look. This carry handle fit perfect and looks great. From what I can see at this point is that the quality is great, fit is great. I have not had time to sight it in so this is \"THE ONLY\" reason I gave it 4 bullets, as it would not be correct or fair to give a 5 until that time occurs. Some of the other post say that theirs was bent or something. They should have returned it for a replacment. I also bought a front sight,new grip and a pad to go on the retractable stock I put on mine (looks and preforms much better than solid standard stock). I will leave reviews for these at those locations. 100% satisfaction on all products and delivery time. Thanks CTD."
4.0 5
"This sight is a good choice for a cheap alternative the real thing. The quality of this item is as good as you could expect for the price. It has VERY minor imperfections in the blueing. With all that said if I were going to leave this sight on my AR permanently, I would opt for slightly higher quality brand, but if you're on a budget this one should do fine."
5.0 5
"For the price, this is a very good carrying handle. It is made of good material. You can't go wrong here."
4.0 5
"What they don't tell you, Made in China, single circular hole through the handle grip for mounting a scope, is 1/2MOA at 100yds. Mounts flat, zeros easily, holds zero. Solid audible \"click\" when dialing in windage and elevation. Great buy for the money. Wish I would have know UTG was Leapers China brand before I bought it. But it is impossible to tell the difference between this and a domestic made Weaver. Judging by the number of people that look at the DPMS and Weaver brand handles and then buy this one it appears we shooters are a price minded bunch. China it is!!!!"
5.0 5
"This is a good sight, it looks to be well made and the finish looks good. It lockes tight to my flat top m&p 15OR and CTD had it at my front door within three days!! :)"
5.0 5
"This is a excellent product--sturdy and well-built. Just as a good as anything else you can get. The color matches my rifle perfectly and I did not noticing any discolorations on mine. Also the sights work just fine and it looks like it part of the rifle once its on. I bought this with a detachable front sight and quad rail for my scope--and it's perfect. So A+ for this one."
5.0 5
"i got it for AR-15 and it works great for me. holds a good zero, no wobble in any direction and the color matches perfectly. solid handle + sight for the money."
5.0 5
"I have purchased many items from UTG through Cheaper Than Dirt and none have disappointed me. This particular carry handle holds firmly on the rail, holds a zero perfectly, and you don't end up paying extra for the name. In my opinion one cannot ask for a better deal. Plus, CTD had this at my front door 3 days after I ordered it! I strongly recommend this product if you are seeking a detachable carry handle with the A2 rear sight assembly, and strongly recommend you get it right here at CTD."
5.0 5
"This is a excellent product. Sturdy, well-built and reasonably priced. The color matches my rifle perfectly. The sights work just fine and it looks like it part of the rifle once its on."
4.0 5
"Mounts up nice and snug. Looks good, feels sturdy, and for the price, it can't be beat. I have not shot it yet, but can't wait to try it out."
4.0 5
"For the price, this is a great sight. I bought the Leapers UTG A2 detachable front sight as well, and the pair look great together. The sight is sturdy and secure. The knobs to adjust windage and elevation work well. Only negative about this sight: the two screws on the side used to tighten the sight are super large and bulge way out."
1.0 5
"The carry handle was very sturdy and secure, but the sight would wobble and wiggle, so adjusting for elevation would make the sight turn left. Only stayed zeroed for one shot. Poor quality. What a waste for my M4. Makes a great paper weight."
5.0 5
"This is great and is the base for my Scope (Item# SCP-264) that is attached to Item# ARR-0605 for quick mounting and removal. Buy it - you'll love it."
5.0 5
"Very nicely made. Finish and color is flawless. Sturdy and click adjustments work perfectly. 5 bullets all the way. I'm building my AR to have the military issue M16 look and this is a great addition! Couldn't be more satisfied."
5.0 5
"Very well built. Knobs are a bit larger than I would like personally, but easy to torque down with your fingers. No wobbles or looseness of any kind on mine. Easy to sight in."
2.0 5
"I bought this handle and loved it (for the price) at first. Then I realized the the whole rear sight wiggles just sightly. Fortunately, it doesn't wiggle when the elevation is as low as possible. Fortunately, my rifle is sighted in with the elevation as low as possible. The wiggle isn't enough to make a huge difference in accuracy at 25 yards, but it'd make for a significant decrease in accuracy at 100 yards. I ordered another sight, and got another and the rear sight wiggled just slightly. I believe they all do this. Not many people have taken the time to notice. Don't cut corners on your carry handle. Buy an American Handle. The difference will be massive."
5.0 5
"After having to return the cheapest one CTD carries due to totally unacceptable quality, I figured I'd just start my way up the price range & keep returning them if need be. For only a few bucks more, while still way less than the most expensive, this one is perfect in every aspect. Mounts solid, nice finish, sight adjustment smooth & crisp,excellent quality throughout."
5.0 5
"I've mounted this on an AR pistol, with a riser and scope on top. Considering the weight of its load and the shock from the light weight of the gun, I can't imagine anyone else would give it a more rigorous workout. It's held up flawlessly. It even outlasted one riser, which suffered from a ripped out mounting bolt. The peep sight is still on target as a back-up."