Welcome to Cheaper Than Dirt! Shop 200,000+ deals on firearms, ammunition, gun parts, survival gear and more. All in stock and ready to ship.

Universal Shotgun Heatshield Fits 12 Gauge Shotguns Black Finish Includes Hardware

 
Advanced Technology
SHS1300
758152513007
SHT-030
Ships from Warehouse 1
Typically ships the same business day when ordered before 4pm CST.
We regret that this item is not available at this time.
Can we ship this to you?
  • DESCRIPTION
  • REVIEWS
New interchangeable components fit most popular 12 gauge pump shotguns, Remington 870, Mossberg 500, Winchester 1200, Winchester 1300, Defender, and Maverick.

Constructed of formed steel with cooling slots for quick dissipation of heat. Simply slide over the barrel and secure with supplied hardware. Black oxide finish to match shotgun components. Fits 12 gauge guns only, does not fit guns with ventilated barrels. 13 3/4" long. Includes an Unconditional Lifetime Warranty.
ATI
 
Total number of Reviews: 66

Submit a review

2.0 5
"I purchased this for a looks only factor but it did more bad than good. It is not easy to get around the barrel of an 18\" 870. It scratched my barrel a bit and you have to bend metal tabs with a pliers and it's very difficult to bend back without scraching the heatshield itself. I would say it would have looked pretty nice but after scraching my barrel I decided not to even use it. Good luck to you if decide to purchase this item."
5.0 5
"I had no problem installing this on my mossberg 500 18\" went on fast tightened down and is holding stiff. It also makes the shot gun look very nice. Im going to order another one for my remington 870 so i will see how that goes."
5.0 5
"Well, I couldn't find the screws and nuts for it, they either got lost or didn't come, but regardless i was able to install it with little trouble without them. It looks very nice on my Mossberg 500, just had to bend the little tabs on the bottom with a plier and its on there pretty good, it did scratch my barrel little towards the end, but not alot at all. It feels like its made out of Aluminum, not bad quality either. I would recommend this to anyone with a Mossberg!"
2.0 5
"It took two of us to get it on a winchester 1300...it scratched the barrel and i had to mod it to fit over my sights because on a winchester 1300 the sights dont come off"
4.0 5
"Easy to install on my mossberg 500. looks good."
5.0 5
"Easy to install if you take the barrel off first. No big scratches and does what its supposed to do: makes the gun look slightly criminal. Add a side saddle and a buttstock cuff and take some ibuprofin to ease the pain and stiffness from 2-3 hours of smiling. Id grind down the bolts too unless you like the madmax look."
3.0 5
"This heatshield looks great. Unfortunately, it did not fit my Mossberg 500A w/ 18.5\" barrel. This may be because I have the breacher variant. The brackets on the front where the screws are supposed to go end up being right on top of the barrel magazine connector ring. A little helpful info if you want to measure to see if it will fit yours, the heathshield length from end to end is 13.75 inches.As always, CTD customer service was excellent. They RMA'd my shipment promptly! Thanks CTD!"
3.0 5
"I put this on my Mossberg 500A. It was a bit tight and I had to bend it out a little to fit it on. It stays on the 18.5\" barrel real tight and doesn't rattle it looks real nice too. My only grip is that I cannot see the bead at the end of the barrel with the heatshield on."
2.0 5
"I purchased this for my 870 short barrel. It fit with some minor adjusments but will scratch your barrel. The sites are plastic. Looks like junk when all said an done.... ended up taking this off and throwing it away."
1.0 5
"This heatshild from ATI is garbage. It will scratch your barrel, it's so tight your slide will not work, it will not mount straight. Tried to install it three times, gave up and took it off. Do not waste your time or money."
5.0 5
"wasnt sure if i was going to buy this because of the reviews but im glad i did.it turned out very nice and was easy to install (if you follow the directions and remove the barrel)all in all its a great buy and will make your shotgun look evil"
5.0 5
"great product. this is easy to install if you take your time. This will NOT tear up your barrel if you know how to operate some hand tools. Great product for $20."
5.0 5
"put one of these on my 870. cleared the front grip no problem, doesn't hide the front sight, fits tightly no rattles. looks evil as someone else has said. didn't scratch my barrel, made a couple of marks that wiped off with my finger, but thats it. used some rubber caps on my pliers so i wouldn't scratch anything. great product for 20 bucks."
4.0 5
"Put this on my Mossberg 500. If you're goal is tactical you will want one!!! Fit well and install was easy. It did have some rattle but dipped the metal tabs (on the thick end of the barrel) in some of that black rubber tool dip stuff. Not only did that take care of the rattle but I don't worry about any scratching."
5.0 5
"ok, all this talk about scratching your barrel and what not. you will NOT scratch your barrel if you can use a pair of pliers. i put this on a mossberg 500a in 15 minutes with a small pair of channel-lock pliers and a small metric allen wrench(don't remember the size off hand). no scratches or sliding or rattle. put a few rounds through it and so far so good. for $20, it does make your shottie look wicked! just take your time and you will be pleased with this one."
5.0 5
"Once again, the people who rated this bad must have not installed it correctly. There is no doubt that you SHOULD remove the barrel to install this. I am no gunsmith but was extremely easy to install on my 18\" Remington 870 barrel."
5.0 5
"great shield take your time putting it on and you wont scratch your barrel"
5.0 5
"Put it on my 870 with no problem and no sratches to either the barrel or the heatshield, take the barrel off and put a shirt or some fabric over the pliers and you wont have any problems. I love it and it looks great"
5.0 5
"This product is easy to install IF YOU REMOVE THE BARREL as the instructions suggest. Trying to force it over the barrel will probably lead to scratches, which appears to be the case with the few disatisfied customers that have posted their opinion. Remove the barrel and it will slip right on. If you can't take the barrel off (which is simple) then take it to a smith to have it installed. I have this on my 18.5\" 870 Marine Magnum with ghost rings and it works and looks great. You'll need to check the tightening screws on occasion so it doesn't move but that shouldn't take long at all. With heavy loads I can see how this may loosen over time but mine has been spot on since day one. I put two tiny drops of blue Lock-Tite on the fasteners and it hasn't moved. This may not be for you if your rear sight is mounted near the back of the barrel."
4.0 5
"I just purchased this heatshield for my Remington 870 with the 18' barrel and installed it today. This thing looks great really gives the shotgun that sinister look. I had absolutely no problems installing it, you must take off the barrel though. Once you do that its a breeze, took me about 15 minutes to install. Not a single scratch, highly recommend."
5.0 5
"I bought this a while ago and I had problems with it sliding on the barrel. I used electrical rubber tape on the front clamps, install tape on barrel then clamp down tight and that fixed it from sliding, and heat or chemicals wont affect the tape.I also bought a mossberg branded heat shield and is exactly the same make of this one, exactly the same."
1.0 5
"So i took my shotgun out to my shooting spot and started shooting 2 3/4'' slugs...i noticed my front sight dissappeared...the recoil popped the spot welds that held the thing together. Now its in the bottom of a creek."
5.0 5
"Also, I have not had any issue with it sliding down the barrel while shooting. I have put close to 30 3\" slugs through the gun, along with the other 500 target load shells I use for clays and this thing has not budged. If yours moves, its not tight enough."
5.0 5
"Got this for the actual intended purpose of a heat shield, to keep me from getting burned. After putting 9 rounds through my 500 Persuader, the barrel would be a little warm to say the least. I've never been seriously burned from it, but it's far from comfortable if your skin touches the barrel while reloading. This has solved that problem, and looks good doing it. Nice little accent look to the whole shotgun. No problem installing it, just take the barrel and bead off, slide it on, screw it down. Only thing I used that didn't come in the package was a little locktite. Very nice buy."
1.0 5
"Did not end up putting this on my Mossberg 500. There is no way it would have stayed without sliding down the barrel. Not very well made."
4.0 5
"It took a little time with a grinder but i fit well after i cut a notch for my sight at one end....put it on a winchester 1300"
5.0 5
"I just bought this for my mossberg 500 and it went on within 5 minutes with no hassles. I took it out and shot 90 shells this weekend and it stayed on perfect. I recomend this product to anyone with a 12 guage."
5.0 5
"Great overall product. Takes all of 5 mins. to install an allen wrench is a necessary can't remember the size."
1.0 5
"Don't waste your money if you have an 870. Will not fit on 870 if you keep original fore grip on. The fore grip rubs against heat shield."
4.0 5
"I installed this on my Remington 870 tactical 18.5\" bbl with the Mako tri rail pump. They work perfectly together. I went to armour school in the US Army and just with a little patience during the installation it stays tight to the barrel even after many rounds are put through it and I had no marring of the finish."
5.0 5
"Just installed this on my mossberg jic. It was a 15 minute job. Had no problems with whatother people were talking about. I did use locktite like someone else said. Looks great andso was the price !!!! ( wicked fast shipping,thanks CTD )"
5.0 5
"I GOT THIS FOR MY MOSSBERG 500A AND IT LOOKS AMAZING. GREAT BUY FOR THE PRICE."
4.0 5
"Put this on an older model Remington 870. Slid right on, following the directions with the package. This makes my home defense gun all the more applicable and easy to use for those less familiar with firearms. Great price easy installation and terrific product, and great, prompt shipping from CTD!"
2.0 5
"Mounted this on my moss 500 tactical. I was wrong for ordering this. Its mounting sytem is hooky. Hardware is also a joke. If you want the look its ok, although Im taking it off."
4.0 5
"installed this on my mossberg 500A. installation wasn't too bad but i had to pry open the one end to get it to slide ALL the way to the very back of the barrel. then, once i got it there i needed to tighten it back up some. so after a few minutes of tinkering around it went on (i scratched it a little during the process, nothing big). when i took it out to shoot it slid a little bit but not very much and once it found it's comfort zone it was pretty solid and secure there. overall a great product cuz it does it's job. you can shoot all day and pass the gun around and no one gets burned."
4.0 5
"The universal ATI heat shield needed some modification to fit on my Mossberg 590A1. First and fore-most on my 18.5\uFFFD 590 the barrel/tube connecter fits over most of the screw assembly on the heat shield. So I had to file off about a 1/8\uFFFD to 1/4\uFFFD off the back end so I could get one screw in it. Then I had to get a smaller screw (I bought a #4 screw whereas they provide #6) to be able to attach it with one screw because the barrel was too wide to fit the larger screw through. Due to the trouble that I had to go through, I scratched up my barrel more than I wanted but I truly don\uFFFDt care about that. I would rather have a scratched barrel with a heat shield than burn my hand(s) on a scratch free barrel. I am very happy with the shield, the thing does not affect the slide action and really covers the barrel; looks nice on the gun too. So 4 of 5 due to the mods needed, but once I got it on it does its job.I seem to be in the vast minority with attaching this as the trouble seems to be capatibilty with my model of Mossberg 590A1."
5.0 5
"This just looks frackin' sweet on my 500a!"
5.0 5
"very high quality...looks great, easy to put on, adds a very intimidating look to my 18\" barrel mossberg 500. It took me longer to find my tool than it did to put it on! Read the instuctions and all goes well! thank CTD and ATI for this amazing heatshield!"
5.0 5
"I was worried about some of the reviews stating that this product scratched their barrel and was tough to get on a Mossberg 500 12 gauge. I didn't have any problems at all. I unscrewed the bead at the end of the barrel first and then installed as the directions stated. This barrel looks great and is on very solid. Well worth the money!!!!!!!"
2.0 5
"Looks really great. I attempted to install it on it my Benelli Nova. 2 problems: 1) Product does not install tightly without clamps and excess force. Removal thereafter is painful. Will bruise barrel if proper precautions are not taken. 2) Pump action will not draw back completely therfore not cycling another shell with it installed because of the rear clamp. This might be different on other models but not on my Nova."
4.0 5
"Just installed it on my Mossberg 500 and it fits like a glove. Removed the barrel, slid the shield to the chamber end until it stopped, then using a vice grip (with a piece of cloth draped over it to prevent marring the barrel) I tightened the tabs on the fat end until they wrapped around the barrel then tightened the front screw tabs until they were flush enough to screw in. Took around 10-15 minutes with trial and error with a few tools until I figured the vice was the best way. Gave four bullets because I haven't shot with it yet so not sure how it holds up, but for $20 can't go wrong."
5.0 5
"Installed on a Mossy 500 persuader. Already had pistol grip. Installed easily and looks tough. Good buy at $20"
5.0 5
"I was hesitant to purchase this item because of some of the reviews, but it was at a good price so I took the chance. I had no issue installing this and it worked and looked good when it was complete. I had no scratches and it was a good fit for my Rem 870. Locking down the back tabs was the only problem I had but it was easy fix with a wide punch and mallet."
5.0 5
"Great buy!! Took my time installing, no problems at all. Now I can't wait to get this 500A to the range!"
5.0 5
"I took it out after my 5 entire minutes of installation and put over 100 rounds through it. not a wiggle, not a scratch. And just to disclaim some reviews I removed and reinstalled it. Buy it for any shotgun. Good product."
1.0 5
"I installed mine the first time reading and following the instructions to a T, and it slid forward every shot. I figured maybe I had damaged it via incorrect installation, and so I purchased another one and had my friend (a trusted gunsmith) install it for me, and it STILL slid forward. Do not buy this product, and if you have a Mossberg/Maverick, splurge the extra 5 bucks and buy the Mossberg brand one, because it has something to keep it from moving forward."
3.0 5
"Well I bought it, had to grind the tabs down on both sides in order to fit my mossberg 500 properly...after about 3 shots the back popped off and the screws were loose... always having to tighten and push back down over the barrel........if you shoot a lot then its not worth the hassle........does look good though"
3.0 5
"the first time i shot this on my 870, it slid forward. i brought it home, and tightened the living s*** out of it. i first used the long screws included, to draw the sides together. i then took them out and used the shorter ones. i haven't shot it since, but i don't see how it could move now. be sure to remove your barrel for the first install, and you will have to bend the tabs near the forearm to fit properly. as a heat shield, it works. you can grab it without burning your hand, and makes the gun look even more bad. just make sure you install it carefully, and you'll be good."
1.0 5
"check your barrel before you buy, this does not fit universally, only made for one type 870 barrel, so beware!"
5.0 5
"This is one of the best modifications I have made to my Mossberg 500 SPX. Yes, it is universal because you can widen the clamps to fit bigger thicker barrels. Note: Use the right tools properly and read the instructions and you will have a fun time installing this heat shield.This heat shield is better than others because the perforations are oval shaped instead of the round holes other brands have. I got so many compliments on my Mossberg 500 SPX after installing the heat shield. It makes a gun look tactical and mean."
5.0 5
"This is an extremely easy install, it took all of 15 minutes to properly get snug fit and align front mounting holes on Mossberg 500 w 18.5\" bbl and stock plastic (zytel?) fore grip with no interference issues using merely a sock and 2 pairs of vice grips whilst sitting on my couch. It is universal fit for the most part people. Don\uFFFDt expect a precision fit for all from a stamped and coated piece of $25 steel. But work it a bit (and tighten those screws people!) and you'll have an excellent tactical addition for your shotty! Also I didn\uFFFDt have too large of a problem with scratching of barrel while installing, it is probable though! I must add the coating is very redundant too!"
5.0 5
"A basic heat shield, not much else to it. Slide it on your barrel, screw it on with the forward end down and you're done. It gives a cool look and keeps you from grabbing a potentially hot barrel."
4.0 5
"I am glad I read all the reviews. Took about 15 minutes to install and part of that was looking for the right size Allen wrench. Used an old piece of suede to prevent scratching and Locktite on the screws is a good idea. Pop-off or move, no way. Nice for the price. Now to install a light and laser."
5.0 5
"Fast shipping. I put it on my 870 18 inch barrel and it mounted easy. A great quality. Thanks again CTD! It looks great."
5.0 5
"This metal heatshield fit my Remington 870 perfectly, with no installation issues at all. I, like other reviewers here, would recommend placing thin leather around where this heatshield clamps to the barrel, as well as use Locktight on the two screws, just to make sure the assembly does not move with recoil. Both front and back of the heatshield are tight as can be on my 12Ga barrel, and it makes the entire gun look very slick too!"
5.0 5
"I had one of these with the rifle sights on my Mossberg 500A, but I took it off because I wanted to start skeet shooting again. I just bought this one recently, installed it and it looks even better than the previous one did. I will be taking the other reviewers advice and getting some Loctite for the screws."
3.0 5
"Got this for my 18\" 870. It took me some work to install it and it does infact rub against my foregrip (stock). You can still pump the shotgun just fine. I have no issues pumping it, but it's just very snug. I have not shot with this item on yet and I may need to tighten everything a bit more cause I could see how it might slide forward. I mean I can't move it with how tight I have it on so Im not sure if it will move. I can slightly see my bead sight on the end of barrel.Its up to you if you wanna buy this item. It does look mean as hell on my 870."
2.0 5
"Bought this a couple weeks ago and installed it promptly. Now you can install it as long as you are careful though it does slightly rub on my foregrip. My foregrip is just fine and actually became a bit more solid, but now for the experience while shooting with it. It slid all the way forward if it wasn\uFFFDt for the barrel clamp at the end this though would have gone all the way to my front sight! I have it very tight, but it still managed to slide forward on me which was really frustrating and impacts your view of the front sight. If you want the hassle and the scratched barrel then buy it."
3.0 5
"Everythign was going smooth until I realized that this heat shield was not made for my Mossberg persuader/cruiser pistol grip. I took a chance since I could not find a good forum with folks with the same weapon. The problem that I had was that my barrel was too thick, so I improvised. I went out to Lowes and bought myself some screws that were 4-40x1-1/4 which are thinner and longer than the screws in the bag they will send you, and they did the job on closing and securing the front piece of the shield. It's universal if you make it fit. Use your darn brain."
1.0 5
"went through all the reviews,just got mine today, before it was out of the package I knew it would not fit. I'm making a \"street sweeper\" built on an 870.I have to guess \"most\" short barraled shotguns are deer guns. None of you guys mentioned anything about REAR SIGHTS. it's not going to fit at all, unless I mill out some of the slots. do I do that and find something else thats not right,or just send it back? I can't believe nobody ran into this before.Any thoughts ?"
5.0 5
"Easily installs in minutes on a Mossberg 500. Looks great and protects you from the hot barrel."
1.0 5
"Tried to install on my 870 tactical. Very poor fit - doesn't cover length of barrel (mine is an 18\") - probably 2\" from the end to my sight post. Doesn't surround the barrel. Looks really cheap installed. Not worth the money (or potential damage to your barrel from scratches)."
1.0 5
"I read many reviews prior to buying this and did not see one about problems with the takedown mount. It was impossible to install due to the screw points being directly over my takedown mount/magazine cap. I have a Mossberg 500 and don't see how any other Mossberg owners didn't run into this issue, though my Mossberg is still very new (possible factor?). I would have had to file it down 1/3inch just to get it to fit, not doing that, returning. I was not worried about length and measuring my barrel seeing it says it fits my 500, buyer beware right? Next time I will be measuring first. Can't review the product as a whole but the description of fitting my moss 500 and not=1 bullet from me."
4.0 5
"Great buy for my Mossberg 500a. The only thing i had to to was a little bit of filing so it would not rub on the pump grip. Make sure you locktite the screws it came with and your good to go.Not bad for 20 bucks."
2.0 5
"At first, this item seemed to fit perfectly. So I went to test its stability at the range. Not only did the heatsheild NOT stay in place, but slid off the barrel towards the muzzle. after getting a pair of vice grips and pinching the heatshield, and adding RED locktight to the screws, was I able to get the heatshield to stay in one place. I used in on my brand new Mossberge Maverick 88, smooth barrel w/ brass bead sight. I'll try going with the AR-15 style sighted heatshield."
1.0 5
"this thing has trouble when it comes to the H&R pardner pump... the pump forarm won't slide over the shield... you would have to heavily modify it to work. Im not willing to ruin my forarm for a heat shield.."