Welcome to Cheaper Than Dirt! Shop 200,000+ deals on firearms, ammunition, gun parts, survival gear and more. All in stock and ready to ship.

TAPCO INTRAFUSE AK-47 Saiga Handguard Black STK07320

Typically ships the same business day when ordered before 4pm CST.
Add To Wishlist Tell A Friend
Can we ship this to you?
When upgrading to the Saiga INTRAFUSE T6 stock set, this handguard will complete the upgrade. Features side and bottom rails allowing for maximum flexibility, lightweight with added ventilation for heat dissipation, and includes a Sling Nut. The handguard includes everything needed to adapt to the Saiga 7.62 x 39mm, .223, .308, or the 12 & 20ga Saiga shotguns.

Features and Specifications:
Manufacturer Number: STK07320 BLACK
Handguard weighs 9.6 ounces
Bottom rail that is 4.75" long
Side rails are each 3.35"
Counts as one U.S. 922r compliant part
Made in the U.S.A.
Lifetime warranty from TAPCO

Fits: Saiga 7.62 x 39mm, .223, .308, or the 12 & 20ga Saiga shotguns.

Black (AKS-620)
Dark Earth (AKS-621)
Olive Drab (AKS-622)

For Warranty questions please contact:
PO Box 2408
Kennesaw, GA 30156-913

Item#: AKS-620
Total number of Reviews: 14

Submit a review

5.0 5
"Nice solid and stable. You need a small allen set, the pocket knife kind work well. The instructions were easy to follow, I had no problems fitting it on my saiga .308. I honestly thought I'd have to trim/file it in some way to make it fit, most saiga mods are suited to the .223 or the 12. Needless to say it was refreshing to just \"pop\" something on for once."
5.0 5
"Solid fit, light weight, normal handling, normal accuracy, accessibly: well some gunsmithing was done I had to drill one hole so it could line up with the rail so the screw could go in. Oh ya use (lock tight) on all screws."
5.0 5
"Went on my Saiga .223 easily, in a matter of minutes, and is tight! Now when I'm done with this review I'm off to find a nice foregrip, and light/laser to fit to the rails! Enjoy!"
4.0 5
"Like other Saiga products by TAPCO, this increases functionality and aesthetics of the weapon."
5.0 5
"Very nice. Easy to install. I just needed to shave down the lip that goes into the gun."
5.0 5
"If you're looking for a way better front hand guard for your Saiga than the factory unit, look no further. Sure, you can spend more for one, but why? This thing works, and it's MUCH better than the factory piece of junk they put on them."
5.0 5
"Fits great, functions awesome and looks good 5 bullets. i do have one complaint though, it takes the tinest allen keys known to man which i diddnt have and had to go out and buy."
4.0 5
"I added this to my Saiga 7.62 and I will say that I'm very pleased with this product and Tapco's whole Intrafuse line. I have the vertical grip and T-6 stock and a SAW grip on it, as well. Each part went on easily and was a snug fit. I didn't need to dremel anything. It looks pretty mean, too. The only reason I didn't give it 5 bullets, is I would have liked the rails to be steel not polymer and the way the front of the handguard mounts to the barrel should be with a bigger screw, I'm worried that when I get a light and laser mounted on the front, that all that extra weight might become an issue. Time will tell. But, other than that I would buy this again and recommend it."
5.0 5
"Perfect on the Saiga 20. Recommend.A bottom grip is a must on the shotguns.."
5.0 5
"Dropped right on my Saiga 12. Works great. The only complaint is that the Allen wrench size is hard to find."
5.0 5
"This fit very well on my saiga 12. I shot about 400 rounds through it. Be sure to put lock tite on the screws. I had a rail come loose, but it also had a heavy tac light on it. I stripped one of the screws out on the rail because I had the wrong allen wrench. Be aware of that. It\uFFFDs way better than the bulky aluminum unit my brother has. I recommend!"
3.0 5
"Installed this on a .223 Saiga. I had to use the .308 forward block as the .223 block would not fit my forward pins. This may have been a factory mistake when the rifle was built, I don't know, but fortunately TAPCO included both blocks. I was disappointed TAPCO did not include a tiny allen wrench for assembly. Also, one of the major assembly bolts was missing from the parts package. I took a trip to the hardware store to find a replacement bolt and wrench. While there I also got slot head bolts to replace the original smaller allen bolts as the store didn't have the correct sized allen wrench without buying an entire kit. The entire process took me several frustrating hours when it should have only taken a short time. When finally assembled it fit but I don't like to jury-rig new equipment and blacken hardware so I give it 3 stars for the inconvenience and the missing bolt."
5.0 5
"Just installed on my 7.62 Saiga. Took a little bit to assemble the rails to the guard but once assembled it fit perfect to my rifle and appears to be very solid. I have an allen wrench set from local auto parts store that I can fit inside the tactical buttstock just to have on hand if anything comes loose. About 5 dollars well spent as it has the tiniest allen wrenches on it. I also mounted the AR-15 foregrip and still have plenty of lower rail to mount a flashlight/ laser later on."
5.0 5
"This makes my second puchase of this and this time assembly was much easier. Loctite is a definite need to secure the rail screws. I only wish the rails were aluminium instead of plastic. but for the price the quality is very good. Anything I mount to the rails fits well and secures tight. Another great buy from CTD"