Welcome to Cheaper Than Dirt! Shop 200,000+ deals on firearms, ammunition, gun parts, survival gear and more. All in stock and ready to ship.

TAPCO GEN II Mini-14 30 Round Mag .223 Rem Black

 
TAPCO
MAG4830
751348006154
63723
Typically ships within 1 to 2 business days.
$17.99
Add To Wishlist Tell A Friend
Can we ship this to you?
  • DESCRIPTION
  • REVIEWS
Tapco Ruger Mini-14 Generation II 30 round magazine features a reinforced metal clip designed to withstand years of use. Combined with a heavy duty spring, our proven anti-tilt follower, and a mag body designed for maximum grip, our Gen II mag is the best Mini-14 magazine on the market.

Specifications and Features:
Tapco Generation II
.223 Remington 30 round capacity
Reinforced Metal Clip
Heavy Duty Spring
Anti-Tilt follower
Textured Magazine body for easy gripping

Fits:
Ruger Mini-14
Note: For optimum performance use brass ammunition



 

Item#: 63723
Total number of Reviews: 11

Submit a review

5.0 5
"Used this in my 580 synthetic tactical mini 14. only problem is that when loaded it is tricky to get it in the mag well. But if you have the bolt hold open activated it goes in no problem. Otherwise works just as good as the factory Ruger mags. tested 3 of these 120rd though one and 60 rds though the other 2. for the price compared to the factory I give the Tapco a 5."
3.0 5
"Purchased this magazine worked well while shooting, as mentioned below. They seated much better with the action open. One problem I found was I left the mag loaded for about 24 hrs, and when I picked it up from that position, the rounds flew everywhere in my truck."
1.0 5
"Buy only the factory Ruger Mags. I bought four of these and I can't get them seated to save my life! When they do seat, they still won't chamber a round, so I'm sending these back and buying the factory 20 round mags instead."
1.0 5
"I bought this magazine with high hopes after watching some videos and reading some other reviews. It loaded easily enough and the follower went up and down easily. However, the fit was very tight in my 581 series; so tight that it squeezes the mag and doesn't allow the cartridges to feed. The best I could get was two shots, followed by a failure to allow the cartridges to move up into the feeding position. By pulling the magazine, it allowed the follower to immediately push the next cartridge up. This happened with TulAmmo as well as S&B SS109, Winchester NATO M855, PMC Bronze, and Federal XM193. A magazine that won't work with five different brands of ammo is useless to me. All of the above cartridges worked without flaws in my Ruger factory 20 rd mags. Aftermarket mags have always been the weak point with the Mini-14. Some work and some won't. From now on, I will never buy anything but Ruger factory mags."
1.0 5
"This mag is junk, does not work, and if used for defensive purposes, might cost you your life. I am not aware of anyone who has ever produced an aftermarket mag that works in a Mini-14."
5.0 5
"These Gen II mags are so much better than the older type from TAPCO. I bought 5 of the newer Gen II a few months ago,(long wait for them to be released to the public), what a better product! It seems the plastic has a better hardness at the top to hold the cartridges in when fully loaded for a long time (my test was at least a month). The metal band holds the magazine in tighter while in the receiver mag well, but loose enough to drop out when released. I am impressed. I just put in an order for more."
4.0 5
"I got this magazine in today and only ordered one just in case it was a flop but it looks good, feels strong and sturdy and fits my 581 series mini very well. I loaded it up and it feeds fine by cycling the bolt. I have not take it to the range. When I do that I may buy a couple more. If I were to judge at the moment, I would say its a good magazine and I believe it will work fine."
4.0 5
"I have already had plenty of experience w/ this magazine. There have been good and bad things said to its quality. I will say this I'm willing to file the metal retainer on top a bit to get it to fit in well properly. That is why I give it 4 not 5. Now It does have a no tilt follower and is able to be disassembled for cleaning. All have worked excellent for my self and I have the model 5847 tactical in a Archangel Sparta stock. and love them both. Especially the stock with co-witness ability"
5.0 5
"Even the original Gen 2 mags for he Mini-14, had to be tweaked some, sometimes...IE, filed and fitted, or sanded in ares, but they worked great once done. NOW, These remodeled Gen 2\"s,.. the metal reinforcement clip has been redesigned and now they lock in smooth, just about as good as factory ones,..almost P.P."
5.0 5
"These are finally dialed in. Tapco went through their production line during the 2013 \"FEAR\" tweaking the mini-14 mag and re-sized the reinforcement tab, now these things lock up like the factory mags. Prior the \"FEAR\",... the gen 2 mags still needed to be filed,sanded or modified, NOW they have it down right !! I called and asked them what was going on with the mini-14 mags in middle of 2013 , and they specifically told me they reworked the process at that time to improve the fit..."
5.0 5
"By far the best Mini-14 magazine on the market."