The B60 is a 600W through-hull low-profile fishfinder transducer with a bronze housing and a temperature sensor. The 20 degree tilt version is suitable for deadrise angles from 16 degrees to 24 degrees. The ceramic element is tilted inside the transducer to compensate for the boats deadrise (angle of the hull). This aims the beam directly at the bottom for accurate readings.
The B60 is shipped as a generic 'Mix and Match' transducer plus a brand-specific adapter cable. If you change fishfinder brands in the future, you can continue to use the transducer with a new adapter cable. (Note -BL and -BB models are made with fixed cables and cannot be adapted to other brands.)
This '-RAYA' version is for the new a, e and c Series, the older A Series and for the DSM25 sounder. (Do not use this version for the DSM30, DSM300, DSM250, L755, L760, L1250, L1260, V820 and V850 which take the '-RAY' connector).
Specifications and Features:
Power handling capacity 600W RMS
Usable shaft length 2.70" (68.5mm) less thickness of hull
No external housing needed to compensate for deadrise, no effect on boat performance
Ideal for center-console and trailered boats
Hole size 2.375" (60mm)
Housing protrudes 0.19" outside hull (5mm)
Arrow on cap points toward keel to align during installation
Beam 45 deg at 50 kHz, 12 deg at 200kHz
Maximum depth 800-1200 ft @ 50kHz (235-353 meters)
Maximum depth 400-700 ft @ 200kHz (118-206 meters)