Welcome to the NEW Cheaper Than Dirt online store! Same great prices and availability, now optimized for your mobile phone!
| Next

Magpul MOE AR-15 Trigger Guard, Ergonomic V Shaped, Rounded Edges, Polymer, Black

Ships from Warehouse 1
Typically ships within 1 to 2 business days.
We regret that this item is not available at this time.
Can we ship this to you?
Replace your stock metal trigger guard with the enhanced MOE polymer trigger guard from Magpul. The MOE trigger guard features a shallow "V" shape to allow for the use of gloves in colder weather. It also fills in the annoying gap left at the rear by most standard trigger guards. Works in all standard 5.56 or .223 AR-15 pattern rifles as well as most 7.62x51/.308 AR platforms with some fitting required. Non-Folding. All mounting hardware is included. Made in the USA. 
Total number of Reviews: 16

Submit a review

5.0 5
"This trigger guard is very nice and solves the problem of getting the trigger guard out of the way when wearing gloves. Because honestly who has time to swing the factory guard out of the way in a combat scenario if you really had to. Make sure you have a 1/8 inch punch to remove and install the roll pin and a 1/16 inch hex key for the front fastener since it is a fixed guard. It comes with new hardware and a highly detailed instruction manual like all Magpul products."
– TheStallion
5.0 5
"This simple plastic piece is a real nice upgrade. First off, it's the thick beefy polymer that won't break. Second, it gives better clearance for those of us who shoot while wearing gloves. (I'll bet that's most of us at this time of year!) Finally, I think it looks cool. Install was easy. I should also mention that for once, the included instructions were clear and easy to follow even for someone new to the AR rifle. I don't have a lot of experience with MagPul so I don't know if all their stuff includes such good directions. Again, great part at a really great price!"
– Carbinemaster
4.0 5
"Don't get me wrong I think the functionality is much better, but I like how the stock trigger guard swings down, this guard eliminates the front detent pin and repalces it with a 1/16\" hex headed screw, the rear attachment is still a roll pin. When I went to install the guard I started the screw and after about 1.5 rotations my 1/16\" hex head rounded out the screw on the inside, leaving a 1/16\" circle. Ya see the hole for the screw in the guard is not threaded and the weakest link proved to be the screw (the cutout for the hex was off center and I think it flexed enough to allow it to round out). Not to be discouraged I drilled out the front hole of the guard to accept the spring and detent pin, took off 3/4 of spiral from the sping and VIOLA - now I have an oversized trigger guard that swings down also."
– Ray in H-Burg
5.0 5
"This is a nice TG from MagPul. The polymer is so light, but strong. I installed it in under 5 minutes. Be careful when doing so as not to strip the threading as others mentioned."
– Randy in Tx
5.0 5
"Very simple to install and leaves plenty of room for using gloves while shooting. also solves the problem of that lil annoying gap at the rear of the trigger guard that scrapes your finger all the time. Seems more sturdy than the factory trigger guard too. A nice little extra for your AR-15. i definitely recommend it."
– joe
4.0 5
"Agree with other reviews in that the hex head screw supplied will round out VERY easy. CTD FAST with shipping."
– HrntFixr
5.0 5
"Just got the part in and installed it with no trouble. I had read the reviews before so I was very mindful of the set screw, that went without a hitch. The part itself is as good as you could want. CTD shipping was lightspeed fast. If you want to get rid of that stock guard this is the one to get, plenty of room for gloves and it looks sharp."
– Steve
5.0 5
"Sturdy and very easy to install. Make sure to install the screw first when putting it on and use the punch on the other pin."
– Pio Tu Maay!!!
5.0 5
"The part fits perfectly on my Del-Ton. I actually installed the pin end first, then the set screw end - went in without a problem. Now there is a much better fit when I wear my tactical gloves. Very fast shipping."
– trintragula
5.0 5
"This is a nice little addition that gives just that perfect extra room for a glove. I had a bit of an issue getting the original roll pin out, but once that was done, this piece was installed in minutes. Very sturdy."
– EricL
5.0 5
"Like the look over the original. Installed with no problems. It allows a gloved finger easier access to the trigger, as advertised. Like the fit and finish. Great upgrade at a modest price."
– Arnie
5.0 5
"Well at first look I thought it was going to be a hard install but boy was I wrong. It took about 3 minutes total to remove the old and install the new. Well worth the money!!!"
– SktSkt
5.0 5
"Easy to install of course. Looks really good & is great for Tac/winter gloves. It's just an all round nice upgrade from the O'l mil-spec trigger guard. Love the Magpul logo on the bottom too."
– Sonnygunz
5.0 5
"This fits well and looks good. Quick and easy install. Money well spent."
– zxxflyer
5.0 5
"Outstanding upgrade for your AR! Looks great, provides more room for a gloved finger, fills the gap at the back of the trigger guard, and most importantly... MADE IN THE USA. MAGPUL ROCKS. Lightning-fast shipping from CTD, as well :-)"
– p99shooter
4.0 5
"Took less than five minutes to install. Looks great and makes a big difference if wearing gloves. I would have given it 5 Stars if it weren't for the \"self tapping\" set screw. Just be careful and take your time while threading. (it already has blue loc-tite on it which is nice) so don't over tighten!"
– Protect the 2nd Amendment