Welcome to the NEW Cheaper Than Dirt online store! Same great prices and availability, now optimized for your mobile phone!
| Next

Mag Raven P-25 .25ACP 6 Round Magazine Triple K Nickel Finish Steel

 
Triple K
1924
730745019240
MAG-372
Ships from Warehouse 1
Typically ships the same business day when ordered before 4pm CST.
We regret that this item is not available at this time.
Can we ship this to you?
  • DESCRIPTION
  • REVIEWS
Raven .25 auto mag replacement magazine for the Raven P25 auto and other small autos. Flat nickel finish with six round capacity. 
Total number of Reviews: 31

Submit a review

5.0 5
"These mags are nice quality and work well. The finish is awsome! I have several on hand."
– Sniper44
5.0 5
"I only got a few of these because theyre aftermarket and are made in Tawain. I was worried they might jam. The ended up working great so I ordered a bunch more, cant beat $7. Since the clips are small you can easily fit 10-20 loaded clips in one pocket. Ive put 1000 rounds through my raven and the few jams I had were with the original factory mags. These have worked flawless. And the nickel finish matches the chrome nice. The original clip was a grayish color.Another great thing about these - removing the original factory clip on these has always been a pain. You push the magazine spring lever and with the original clips, you still have to remove (will some slight force) the magazine. With these aftermarket clips, simply pushing the magazine release lever will allow the magazine to freely drop out instead of having to be pulled out in the case with the factory clips. That makes a big difference because it allows you to immediately reinsert a fresh clip instead of having to pause and use both hands to remove the factory mag. In fact, I never used to fire my raven much because it wasnt convenient to remove and reinsert the clip like it is with modern pistols that have a magazine release button. Now, with these clips, the release works like a modern button because mag drops right out. PS- Ravens have a rep for being crappy. Alot of the earlier ones had quality control issues. If you got one from maybe 81-84 (84 was the year they closed) it's much better made than the earlier models. Only problem with these is the firing pin is prone to breaking. Ive never had a break though. But u can get steel machined replacements that work better and are much more durable than the factory ones. In act, after I changed to the steel aftermarket (looked different, slightly longer than factory) I noticed the performance of the gun increased alot. Much higher rate of fire. These aftermarket steel strikers bring the slide back into place alot quicker. Before, I had to take a slight p...."
– esCo
5.0 5
"Just some more info for anyome interested. I found out that the aftermarket steel firing pins that are commonly available will not work with the original mag- but works fine with these. If u read my last post itll make more sense. If you look at the bottom left of the mag youll see it's got a notch. The original factory mag doesnt so the edge is even. So you have to push the factory mag all the way in, that's why it's harder to take out, you have to pull back the magazine spring with one hand and pull out the mag with the other. Since these aftermarket mags have that notch, you essentially dont have to put it in all the way because it stops when it hits the notch. You can push it further past the notch (probably a single mm) and it'll stop just like the factory mag... This is why these clips are easy to unload. If u insert the mag and stop at the notch simply pressing the spring button will allow the mag to drop freely. Here's the most important thing though- the aftermarket firing pin is slightly longer than the stock pin. Because of this, it wont work with the original mag. The pin hits the round as it's being chambered obviously getting stuck. But, with these clips, since you dont need to push them completely in, no problems with aftermarket pin. So just a heads up, besides being a great mag for the reasons mentioned, if you ever get an aftermarket pin like the ones they sell at Numrich u might have a problem using factory mags because they dont have that notch (hard to see in the picture) that gives u the extra clearance for the pin..."
– esCo
3.0 5
"I recieved my mags and they worked great.I didn't have any problem with feeding or jams.The problem was that the description said they would be nickel finish and only two of the four I ordered were actually nickel finish.The other two were just the standard blueing.Now this doesn't really bother me,but my gun is nickel and they just don't match.If I go shooting with my friends I guess I'll just leave the blued ones home for when I go by myself.Other than the finish they are great mags. Peace"
– OpForKiller
1.0 5
"Purchased 5 of these magazines. The bodies are 1/16th inch taller than factory magazines. When fully locked into the pistol it causes the slide to drag or hang on the feed lips. These results were repeated with all 5 magazines in 3 different Raven 25's. The magazine follower is also molded at a different angle than factory followers I have. This causes a last round failure to feed and makes the magazines difficult to load to a full six rounds. They are a very good looking magazines and appear to be well made. With a bit more attention to detail they might be worth buying."
– JTJersey
1.0 5
"Great price but both of the ones I ordered did not fit. There is nothing special about my Raven MP-25. It is stock and the mags did not fit. They will slide in about a quarter of an inch but then there is serious resistance. I think the overall girth is larger than a stock mag because of the nickel plated finish."
– Bummed out about da mags
5.0 5
"I loaded the clip and could not undeerstand why it would not seat in the gun. I later realized ai had installed 7 rounds instead of 6. when I removed one round it works perfectly. I am ordering 5 more."
– jerry161662
5.0 5
"these clips are great-great fit-unbeatible price-highley recommend"
– bully1953
1.0 5
"Have four Ravens two P-25 and two MP-25. Ordered four Triple K mags. Not one fit in any of the four pistols. Had to return all four. Waste of time. Not good!"
– John
1.0 5
"These did not fit an Old Model P25. I ground them down to fit but then had excessive problems with misfeeds. I will trash them and continue using the original magazine."
– Griffin
1.0 5
"I bought 5 of these and now of them fit my Old Raven P-25. Four of them go in half way and that as far athey go. The fith one goes in three quarters of the way.The price and quality is good. They just do not fit my P-25."
– Chris
1.0 5
"The clip for a : Mag Raven .25 Auto 6 Round P25 will not load the shall from the clip"
– sam
1.0 5
"These do not work at all in my Raven. My Mother has been carring it for 18+ years and AI bought her a new mag as a backup. Only goes in about half way and stops. Mesured them with mics and they are about .008 to big to fit. A waste of money."
– rog313
5.0 5
"It was a real nail biter, seeing how the previous purchasers of these mags had such extremely mixed reviews. I bought three of them for my twin Raven saturday-night-specials. Don't ask why I own them...The three I got were perfect! Hard chrome-like nickel finish, perfect fit, and did not fail to feed after going through a box of PMC.These rocked!"
– Lucky
5.0 5
"I bought two of those mags, and they fit perfectly!"
– Erwin
1.0 5
"The magazines are priced fairly and were delivered very quickly through normal us post. However all the speedy delivery and fair pricing in the world can't make up for the fact that the mag does not fit in the gun it was made for."
– Ollie
3.0 5
"I was immediately impressed with the contruction. The high gloss chrome finish, smooth sprint travel, sturdy feel, and it fit in the pistol well. However, I did have to improve the feed lips with a drill tool, or I could have just bent them. The lips seemed to drag on the underside of the slide and slow the action down. My tired recoil spring did not like the additional drag. But I liked the magazine enough to buy another soon. My Raven is the older MP-25 with the sliding safety, not the flip-up safety."
– Bob
3.0 5
"got it delivered in three days regular post but had to make it fit this mag is a lil bigger than the factory one"
– PaNcHoViLlA
5.0 5
"I bought this for my MP-25, and it functions like a dream. I didn't have to alter anything. 100 rounds later not one problem.Great deal for a sturdy mag."
– mike
3.0 5
"I bought 5 of these mags. I had to sand down the tops of 3 of them to even get them to load into the pistol correctly. Then I had to sand down the tops of the other to get them to not jam on the first round.HOWEVER, once I put a little work into them and got them sanded down and smooth, they work great! Cheapy mags for a cheapy gun. What can you do? But from what I understand, that is pretty much a standard story for replacement mags for this weapon.Considering the price, I think it is well worth the little bit of elbow grease to get them to work."
– Dimondwoof
5.0 5
"I odered one clip because I read alot of bad reviews and it turns out that this clip works real good ."
– Marcos
4.0 5
"Just as good as the o.e.m Very happy with the clip for the money."
– Big \"G\"
5.0 5
"Bought 2 of these. They work great. No ftfs or problems at all. Will be buying a few more soon."
– big jack
5.0 5
"Bought 4 of these mags and just used them today. Great product and price!"
– MFS
5.0 5
"I Bought one mag at first just to check the quality. It fit perfectly, fed flawlessly, and feels solid. The finish quality: seams, feed lips, follower, spring tension, the base plate has a longer tongue than the factory mag (makes mag extraction far easier). The base plate looks to be stamped folded and welded in place. I feel this latter feature beats out the factory crimped on base plate. I carry My 25 as a back up to my primary. It works great for that purpose. I needed a mag that functioned as well as or better than factory. In my first experience with Triple K, I can see they deliver. I have my second p-25 mag on order already. I will have three mags now. Given there quality, I wish I needed more."
– ROOK
1.0 5
"Mag came quickly but it doesn't fit my .25. Goes in about 3/4 of the way and then sticks. Took it to an armory and they told me that it is a bit to thick. Turning it back in for a refund."
– Does not fit!
5.0 5
"I order 3 magazines for my Raven Arms Model P25. Received them in a flash. 2 fit & worked perfectly, the other would only go in 7/8 the way in. Called & explained the situation. CTD sent out a replacement that fit perfectly. It seemed as I hung up the phone, UPS was there with my replacement, EXCELLENT customer service. Great Job guys"
– HAP
4.0 5
"This magazine is quite close to the factory magazine. I does not have numbers on the side indicating how many rounds are in the magazine but the fit and function is same as factory. It fits my phoenix raven mp25 as well as the factory original. The price is a little high so I gave it 4 bullets instead of 5. The shipping was very fast. Thanks"
– Bubba
1.0 5
"Magazine does not fit in the pistol. I am going to try to sand it down a bit to see if that helps."
– Ricks
5.0 5
"Good little magazine. Using in a Pheonix Raven .25acp nickle plated pistol with black grip. great fit and functions flawlessly."
– Bubba
5.0 5
"Great product, Great price, magazines fed perfectly, better than O.E.M."
– Rick