Welcome to the NEW Cheaper Than Dirt online store! Same great prices and availability, now optimized for your mobile phone!
Previous | Next

Mag H&K G3 7.62x51mm Aluminum 20 Round Original Military

 
H&K
G3
MAG-304
MAG-304
Ships from Warehouse 1
Typically ships within 1 to 2 business days.
$2.97
Add To Wishlist Tell A Friend
Can we ship this to you?
  • DESCRIPTION
  • REVIEWS
We obtained a huge lot of H&K Magazines at a great price, and we're passing the savings on to you. These Factory German H&K magazines fit the H&K Model 91 or G-3 .308 rifle. Also fit PTR-91 rifles, and can fit CETME rifles with some minor fitting. 20 round capacity, aluminum, original military; used in good condition. Grade II.

All Military surplus products are used, the condition of the products varies, and the quantities may be limited.
Surplus condition scale:
Grade I Used in like new to excellent condition.
Grade II Used in good condition, may show minor use.
Grade III Used in fair condition, will show normal wear and tear from daily use. 
Total number of Reviews: 413

Submit a review

5.0 5
"I have bought scads of these, at $3 a pop, why not? I have run them in two different Century CETME's with no problems. By and large these are great magazines. I would call them \"Good to Very Good\" condition. Occaisonally there will be a bit of rust on the floorplate or follower, and have seen one or two with bent or dinged bodies. Heres the trick:1) Order a metric butt-ton of them. I usually order them by 10's or 20's.2) When you get them, disassemble them all and inspect. If you find a bum part, set the whole mag aside, and save for spares.3) When The Wife isn't looking, toss all the parts in the dishwasher and run them with just a dab of dishwashing detergent. Put the followers in the silverware holder, or they'll all wind up in the bottom of the washer. Aske me how I know.4) Once done, get an old towel and make sure all the parts are completely dry, and re-inspect.5) Put a dab of boat-axle grease on the spring. Not too much, you don't want to collect a bunch of cooters.6) Put a dab of Tetra Gun Grease on the follower where it rides on the magazine body. Just a tiny dab.7) Reassemble8) Re-paint if necessary or desired.9) Load 'em all up and go have a good afternoon at the range!If you run these in a Century CETME, you may need to file either the locking notch or the seating tabs on the side of the body to get them to seat right, but I haven't had to yet, and I've got probably 80 or 100 of them.All in all they are a steal. Get 'em before either I get them all or they aren't available any more."
– PipeRain
5.0 5
"Great bargin for you buck. I just recieved my 20-rd clips. They fit great on my H&K G3. There was no sight of rust or damage, they look new. Very pleased with my purchase. Will reccomend to anyone with a Cetme or G3 rifle"
– Adrian
4.0 5
"I purchased 3 of these magazines and like mentioned before, a great price. I did however receive only one that I would classify as in \"good\" condition; with the other two showing considerable wear. They were functional and the wear I would not consider to be a result of abuse, but when compared to the first they were obviously in worse condition.If aesthetics are important to you then I would recommend ordering them by the dozen and with that, you should in my experience receive 4 in the condition you are wanting. Cheers."
– Opfor Guy
5.0 5
"I bought 5 of these mags on the first order. I took them apart ,cleaned them with Hoppe's no.9, Sprayed some Silicone on them and put them back together. They worked terrific in my PTR-91. I bought five more and they too came in in pretty good shape. I had seven in total clean up to almost new condition. Two that had minor dents on the front face that did not affect the fuction of the magazines. Only one did not fuction ,but after taking it to work and banging out the dent on the side, it now fuctions as good as all the others. I am going to order a few more as spares should the government want to impose the high capacity magazine band again. All I can say is stock-up now."
– David M.
5.0 5
"I have bought about forty of these mags for my Century CETME. They all work just fine. Also, the price cannot be beat, especially as I have seen CETME mags go for anywhere from $16 to $20 both online and at gun shows. Stock up on them."
– Texan Raven
5.0 5
"just recived mags and they are in great condition will be ordering more this weekend. thanks guys ctd is by far the best gun site"
– chancey1
5.0 5
"Just received the first 6 of these I ordered yesterday, condition much better than expected at this price. Ordering more today, and the pouches to carry them. The price just cant be beat. Oh yeah and they're for my CETME not H&K fit function and feed perfect in my rifle."
– Obersmith
5.0 5
"Just got my 8 magazines. All were clean and in very good condition. They were a good tight fit my G3 and loaded and chambered nicely. This is the best price for these magazines anywhere on the net and I'll definately be buying more"
– mortyman
4.0 5
"I bought a few of these for my Cetme Sporter and they did not work at all for me.I read all the posts that said it works perfectly for it, but no luck in my case.... did you guy's alter them?My troulble seems to be that they did not click in all the way as the old cetme mags did and they pull out without any effort at all.. it did not seem to safe... Is there anything I can do?Thanks-PS- they are good condition mags and seem to to be a great buy for the money... but i guess maybe not for the cetme's?"
– Krom
4.0 5
"Bought 8 of these for my cetme.2 of them snap in easy.The other 6 you have to give a good whack to for them to click in.Proably not a dad idea to do to any military type clip fed weapon.Bottom line they all were 100% functional at a dirt cheap price."
– clipster
5.0 5
"Just a note for the CETME fans , these mags will work in all Cetme's , some rifles have a slightly oversized mag catch and require a little filing on the mag only not the catch , insert the mag fully and look at the left side of the catch , you will notice that the detent on the mag falls short of allowing the catch to seat fully , small amount of filing does the trick , be carefull not to remove too much or damage the mag body itself , do not modify the rifle mag catch as this will cause problems with original Cetme mags . A single sided mill file works best or a dremel tool , but be carefull with the power tools , it is very easy to remove too much material ."
– Bob
5.0 5
"Purchesed 8 of these a couple of weeks ago for my PTR 91, all were in great shape, except one had some dents but it worked perfectly. just ordered 12 more"
– Derrock
5.0 5
"These mags were in execellent cond. I bought ten mags dating from 63' to 88'. CTD, you guys rock"
– SenselessPuma
5.0 5
"Bought 10 of these for my CETME. All came in very good condition and cleaned up easily. All of you with a CETME, just follow Bob's advice below in regards to mags that will not seat properly and they will fit just fine. Thanks Bob. Thanks CTD... where else can you get .308 battle rifle mags for less than $3 each?"
– RWA
5.0 5
"Just got home to a box waiting for me from the Mrs. What a great Valentine Day present. I've been looking for mags for the Century Cetme. I opened the box and 10 nice looking mags were staring back at me. They are used but in good to very good condition. I tried all 10. All fit will no problems. One of the 10 feels like it needs to be broken down and reassembled. Side walls seem flimsy and the spring was rattling. The follower was in operating position, and it would have functioned for the time being. 9/10 were as good as you can expect for 3 bucks. Add in shipping and I got 10 mags for 41 bucs and change. Can't get better than that. I'll be ordering as many as the budget allows. Great deal CTD. Now if you can work on the same deal for the Glock mags??!! ;-)"
– AZ Devil
4.0 5
"Got 2 mags work great in my cetme one is a 1964 and the other is a 1987"
– harv1971
5.0 5
"these mags are awsome. i ordered 3. one was mint one was good and one was pretty worn but the all worked great with no seating or feeding issues"
– snakemanmike
5.0 5
"Ordered 5 of these and they all fit perfectly in my HK-91. They should be classified as used/good condition. The finish is nicked and worn, but all of the magazines function perfectly without jamming or miss-feeding.These are combat ready items that will be reliable when the SHTF."
– MAJ Mike
5.0 5
"Great mags. IF you own a cetme, you may need to grid down the top of the 3 stops on the side of the mag. Several of the reviewers report it not seating correctly, this is the solution, make sure you do not grind down too much, slowly work your way on them until they just click in, then pound on them hard to seat the aluminum, and they will serve you great forever."
– Pyrex
5.0 5
"I just bought 10 of these and only 1 was dented a tiny bit out of all of them, 4 were brand new and never used, still had the oiled paper in the follower to keep rust out. Dates on them ranged from 66 to 84 but none with my rifles date on them from 4/74. All of them fit and functioned fine in mt hk and I am very pleased, I am going to order more right away to get my stock up before November."
– Old Jimmy
3.0 5
"I ordered 6 mags and non of them work in my cetme, otherwise they are in fair condition and a good price."
– red
5.0 5
"WOW THESE FIT GREAT IN MY CETME, ALL WERE NEW THANKS CHEAPER THAN DIRT"
– RUSSELL
4.0 5
"I just got 9 of these mags today, All fit my cetme great!!! all seated good no problems there... deff cant go wrong for $3 each. Will buy more in my next order!!! better buy them now while you can!!! THANKS CTD!!!"
– TOPGUN
4.0 5
"I gave these 4 out of 5 stars because of the six magazines i ordered, three were new, 2 were used, and one had substantial rust on the bottom. Still a great deal.These are identical to magazines you will find in a gun store for $16+, but you need to clean them up a little first.They fit great in the pouches sold here on CTD!"
– Humboldt1337
5.0 5
"These are NATO G3 Magazines. I bought 10 of these. 8 were NEW! Mags date from 1964 thru 1979. 5 mags were Rheinmetall, 3 were HK, 1 was Danish the last was Norwegian. Who cares if they are not steel. These are $3 and made for your rifle.Fit a PTR91 perfectly. No loading or feeding issues as of 500 rounds on same magazine. Magazine locks in place and is easy to remove everytime."
– HK Toter
5.0 5
"I purchased 10 of these mags, 7 out of 10 were used great condition no dings nothing.. 1 was new still had the paper on it. 2 were used good condition but all cleaned up nicely and fit my 91 perfectly. You can't go wrong with these mags!!!!!"
– Elric
5.0 5
"Just got 10 mags in. Saying it is a bargain is an understatement. Of the ten, four were brand new, five were in excellent condition and only one showed real wear. I'll be getting more."
– Tim
5.0 5
"Received a shipment of 10 of these magazines and I was very impressed with the quality! 100% were in great (read: FLAWLESS) working condition, with mag springs functioning perfectly and fitting perfectly in mag well. Some of these guys were even brand-new, looking like they just came of the machinery at HK. All others were in good/like new condition; a heck of a deal for $3 a piece!"
– Matt
4.0 5
"I bought 10 of the mags, and while I didn't get lucky and get new ones like some people, I did get some pretty decent mags for the money. Only one of the 10 has any issues, it had a small dent in the floorplate, and the mag spring had some rust on it. I cleaned and oiled them all and they look great, just some slight wear on them which is basically some small spots where the finish was worn off. the magazine follower is chrome plated steel, and im planning to buy some more, 2.99 a piece, you cant beat it."
– buck19delta
5.0 5
"I ordered 10 of these and my only regret is not ordering more! 5 were brand new and the other five showed only light wear - 9 of them were hk manufacture dates range from 8-66 to 9-88 WOW"
– MASTERGUN
5.0 5
"I purchased 40 of these mags, all but two were new in package, even the used ones were great condition. I will be purchasing more soon, before there gone. Works great in my G3, 53 and 91."
– LE 1
4.0 5
"I bought 6 of these: 4 looked new, 1 was well used but worked, and one had a large dent and all that could be done was save the internals for spare parts. Over all, you still get more than what you pay for."
– Ray HK91 Oklahoma
1.0 5
"Price is misrepresented when compared with the print catalog. Condition is misrepresented -- several magazines in my order arrived dented and unusable in my PTR."
– WU
4.0 5
"On 1/11/2009 I ordered 6 mag,s,I receaved them today,5 of them in real good,to new,1 in bad but usable condition."
– Norm
4.0 5
"Just got the clips I ordered. all four were in great shape one even still had protectant still on it brand new.Already planing to order more this was my first order not last. P.S. only gave four Bullets because nothings perfect!"
– Tony
5.0 5
"I've ordered these mags I 3 diff times now, and every time I've gotten mostly brand new mags. The ones that aren't new are dam near new. Thank CTD."
– M1Aaholic
5.0 5
"Picked up 8 of these for my Cetme. Out of the 8, one has a dent in the front of the magazine, one has a small amount of rust on the bottom, and all show moderate wear. Overall they are in great condition, and I would gladly purchase them again. Very good deal."
– D
4.0 5
"I bought 10 mags, although I did not get any new ones as some do, all mags are in great shape and working order. I will deal here again Thanks"
– Boggyhill
5.0 5
"We'll here I am again ordered 5 more clips all great one paint been rubbed away but very nice. Just made another order but not clips now I have plenty. You can't go wrong and some things ARE Perfect!"
– Tony
5.0 5
"Just got 5 in and they are in perfect shape, a little wear on 2 and the other 3 look brand new. Will definitely get more if they don't run out!"
– madmax
5.0 5
"I got 5 of these mags on Saturday. They're all in very good condition with strong springs. I'm very happy with them and CTD's fast service."
– Chris
4.0 5
"I purchased 5 for my CETME. I expected only a few to work well for that price, but I was wrong! All were in good shape and fed just fine. I think only 1 needed to be filed down a little on the stopper-tab. Great deal considering they are aluminum and from Germany. Worked way better than my used steel CETME mags."
– the dude
5.0 5
"work great in my ptr-91. need a little cleaning up but over all great deal"
– mbuff
5.0 5
"For less than three bucks these mags are great. I ordered 10 due to the current political BS going on right now. Most were new or very slightly used. I got one with two small dings. Great Deal CTD."
– Duke Holliday
5.0 5
"These mags are in great condition. Two or three out of the 10 I ordered had a small dent in them but it was nothing that interfered with the overall function of the magazine. The blueing on one was very worn down but it works fine and none of them are rusted externally. However they do tend to have some rust on the spring and beneath the follower. For the price it was a great buy."
– Nick
5.0 5
"I got three of these and they are great. Two where like new. All fit my ptr-91. Can't beat for the price. I'll be getting more."
– Allen
5.0 5
"I just ordered 2 mags to see how they would be. All I can say is G R E A T !!!!!!!!!!"
– Thomas
5.0 5
"i agree with thomas, very good, and price is awsome, cant beat it"
– shooter
4.0 5
"As stated. I ordered 5 mags, all are used but in really good shape. Springs are strong only minor sings of wear. Can't beat the price."
– Steve-o
5.0 5
"These are absolutely the best mags for the Century sheet metal-framed CETME. Buy MANY while you still can. I got mine several years ago for 99 cents each (!) but these are still the best deal around. They work better than the CETME mags because they are meant for the Century CETME/G3 \"do-all\" receiver. Most of mine were marked HK and dated in the seventies. All worked and fit perfectly."
– El Chopo
4.0 5
"Generally good mags but one of mine came with a bent feed lip which was easy enough to fix but they just arent as strong as the steel ones."
– SmallTimeShooter
5.0 5
"Ordered ten of these mags on a whim. Three were brand new. The other seven looked like they had maybe pushed 20-30 rounds each. I'll be buying more shortly. This is the best bargain for anyone with an HK/CETME."
– SB
4.0 5
"got 2 today, one works and fits fine the other does not fight just right but will still go in. even though they are for a G3 they still fit my cetme for this price you cant go wrong"
– dane
5.0 5
"I just ordered 10 of these mags last week every single one works great in my FA91/Cetme. For the price how can you go wrong. None of mine were brand new in plastic like some people claim, but all marked H&K / G3 an still in really decent shape!!"
– Top Gun
4.0 5
"Ordered 11 magazines.3 are brand new (still in plastic)1 is in Excellent condition3 are in Very Good condition4 are in Decent conditionOrdered them yesterday, received today. Fast shipping, overall great buy!"
– AE
5.0 5
"I've now purchased sixteen of these mags for my CETME. 50% have been brand new and the other 50% have had very little use. In a market that is going insane with pricing, this is Christmas for an H&K/CETME owner."
– Amtraker
5.0 5
"I got ten of these mags...should of got twenty!!! A little tight in my Cetme but well work that out. Thanks CTD!!!"
– Tom N.
5.0 5
"bought 100 of these mags and some look like new.mags are dated from the 60's thru the 80's. they all seem to have strong springs and clean followers."
– jimmie1911
5.0 5
"These are well worth your money. I was very pleased with my order."
– Junkie
5.0 5
"These mags are AWESOME!! some minor wear on bodies, great spring and followers but all in all CTD oes it again. if you own a true hk-91, fill them up and look out world!!!!!"
– psg-1 guy
5.0 5
"I ordered a bunch of these and every one works with my CETME rifle."
– P. Revere
5.0 5
"I just ordered my second batch of these. In a review for my previous order I just wrote \"YES!\" after receiving them, I guess that review was not descriptive enough, I was overly excited over this price! I see these being sold at gun shows at five to ten times this price. It seems like a no brainer if you own a G3, 91, CETME or any clone thereof. Heck, I have not even got my CETME yet, but I wont pass up a good deal like this!"
– Chris
5.0 5
"I ordered 25 and recieved them today. Out of the 25, (9) are brand new, (4) are beat up with loss of finish, dents, and one bent floorplate, and the other (12) are in very good shape with no dents, just some scratches and loss of finish from being inserted in a weapon. Even the (4) beat up ones are still functional, just ugly. All but (2) were HK stamped. This is a great deal."
– Troy S
5.0 5
"Just ordered my 3rd batch of these mags. I can tell you that they come in great shape almost brand new at times. This deal can't be beat anywhere else buy while they last."
– Albert
4.0 5
"Ordered 250 magazines. Of the 250, about 20 were new in wrapper. 25 were culled out for dents and of those 25 about half were rejected as too severe to function reliably. Two mags were pulled for having severely bent floorplates. About 40% of the mags had cosmetic rust on the floorplates. Mags were about a 60/40 mix of blued/phosphate finish. HK made up about 1/2 the manufacturers. ...still a great price for anything marked \"HK\". Total reject rate was about 6%...they'll be broken down for parts. Oldest mags were 1965, newest mags were 1985.All in all a good deal. Paid for 250 mags, got about 235 usable mags and it still averages out as a bargain. The mags are actually cheaper than two rounds of the ammo you use to load them!"
– Commander Zero
5.0 5
"Ordered 4, should have got 10 more. Not a mark on any of them, all look NIB. All are real deal, properly marked (stamped) G3 magazines from early/mid 60's."
– APD34
5.0 5
"I just bought 2 of these and you can tell they are used but for being used they look and function really good. would and will buy agian."
– Tony
5.0 5
"Attention all hk-91 owners and cloners, once again i ordered another 40 and it's like this: 17 in original wrap!, 35 true hk!, 2 for parts. Buy now or cry later!"
– psg-1 guy
5.0 5
"bought 10 of these for my hk91 clone, and 9 were in used but great condition, one was brand new in the original packaging. just cleaned them up, and loaded them up, all function flawlessly, even when going full auto. would recomend these to anyone who has a 91 or clone."
– Mike
5.0 5
"this is the best deal ive ever found. out of 50,1 will be for parts.i have paid $4 to $25 for 1 at gun shows.they fit my cetme with no problems.when this deal is over the price will only go up.thanks for the great deal c.t.d."
– cetme
5.0 5
"Awesome deal! I picked up 20 2 in origanal wrapping 19 usable all better than the stated \"good\" quality only one to dinged up to load but im very happy and hope to pick a larger order soon. I live in texas and although the shipping was half as much as i spent on the mags i received my package less than 48 hours after ordering"
– txshooter
5.0 5
"I ordered 50 mags. I opened the box and counted 51 mags total. Out of the 51 mags only one was in poor condition (non operatable), 32 were in like new condition and the other 18 were in diffrent stages of used condition. I only had time to function check the used mags and all worked great. The dates on the mags ranged from 1964-1985. Its hard to believe that an H&K G3 magazine cost less than one round of M118 ball ammo. Now I have to rewrite my zombie survival plan to figure less time for reloading (ha ha). Thanks for the deal."
– CATM Mike
2.0 5
"Out of the 5 ordered, 2 were very good shape, 2 were well used with a few dents but serviceable and 1 had bowed floor plate, cracked side and dented in the front where it hooks to the trunion...that'll be for parts. I'm sure if more were ordered the ratio of good to bad would be better, but for the price it's worth taking a chance."
– Joe
5.0 5
"Got twenty of these things. NO they are not perfect, NO they are not new. They are not advertised as such, But MAN what a deal. Every one I got looked good and fit well and functioned properly. DO NOT get caught with your pants down. Like every other thing from AK's too CETME's the price of these things are only going to go up. I plan to buy 50 more."
– CETMEn
5.0 5
"Ordered 20 with the hopes that they would function in my CETME. Of the 20 , only 2 that I need to work on, the rest were clean and serviceable. Most were original HK with dates from 63 to 88. All fit into my rifle with no problem . Great deal, great service."
– Jim
5.0 5
"I ordered 10 of these and 7 of them were literally brand new. the other 3 in really good condition. definitly a great deal."
– John
2.0 5
"As stated above 2 out of 15 were in exellent shape the others were not so good with at least 2 bent ect. there are better deals out there."
– Rob
5.0 5
"Ordered 10, what the hell at a this pirce. was surprised to find out all are or look brand new!!! 6 were still in german packaging the rest were unpackaged but perfect except one has a ding in it but nothing major. What a deal:-)"
– greg
5.0 5
"I ordered 10 about a month ago. 2 were new in original packaging the other 8 were used but great condition. went out and shot thru each mag, not 1 issue, SO i bought another 20. Out of this 20, 9 were new in package, 3 looked NEW just not in original packaging, 7 were used but good condition and 1 was WELL USED and looked like it got used as a hammer. haha. but the internals were in good condition, so it will be a parts mag. went out and shot thru all 19 and 1 of the used ones did a FTF, but when i used it again, no issue. will definitely be buying again."
– Kris
5.0 5
"got 50 today.24 were in wrapper or new. only 1 bent and dented. may be able to fix it,but at this price who cares.the rest were all in usable condition. maybe beginners luck.fast shipping ordered fri. evening at 3;00 fedex knocking on door at 9:00 this morning.ill be back for more."
– mike
5.0 5
"Just got 20 mags. Was skeptical about the price, but was shocked when I received 9 brand new still wrapped in the factory packaging mags, The others were slightly used but in good to great condition. Only 1 mag was broken. Excellent deal for the money!"
– Mike O
5.0 5
"I ordered 100 and only got a few that were new, and the ones that were new were covered in sticky adhesive. I saw quite a few posts here that they got a good portion of new ones. They must have gotten lucky.CTD only sent 96 and 3 were broken. I called and they quickly replaced the missing and broken ones.Most of them are fair condition, some with dents, some bent, some with rust, and some fairly worn.4 missing3 broken7 poor - required some work to get functioning46 fair - dents, bent, rust, worn23 good - slight wear or minor dents12 very good - light scratches, minimal use5 new - but covered in adhesive mixed oil or somethingMaybe I got the bottom of the barrel, or maybe they don't give you as good of mags if you order a large quantity.But since they were only a little more than a dollar with shipping, I still have to give the deal 5 stars."
– John J.
5.0 5
"I received my mags yesterday, and though they were simply thrown into a box and shipped I did not mind seeing as how they are going to take a lot more of a beating in the future. I ordered only 8 to test out CTD's supply and I am well pleased! 6 of the mags didn't even have wear on the followers, the other 2 had trace amounts of wear. Spring tension is perfect. Thank you CTD for supplying more mags to my favorite gun in my arsenal. I intend on purchasing more soon."
– G3 Fanatic
5.0 5
"I guess i was one of the lucky ones. I only ordered 10. 5 brand new still in wrapper. The other 5 aint in wrappers but still look new. They dont even have the scatches on top from being in a gun. Also everyone is H&K years 66 to 88. Best deal I think I've ever got. thanks alot."
– cti cetme
5.0 5
"I purchased 20 of this item and when they arrived I was pleasantly surprised what wonderful condition they were in especially for this AWESOME price. They all fit in my cetme perfectly. Thanks"
– Reverend
5.0 5
"Yesterday, I received my order of 100 Cheaper Than Dirt (CTD) $.99-each H&K 20-round G3 mags. Best deal on mags I ever had. Shipping was a bit high at $25, but with a $124 total I couldn't go wrong. Prior customer comments on the CTD site indicated that, while all were happy with their orders of these mags, some received a few less than 100 and some had a few damaged mags. I mentioned these comments to my CTD salesperson and she said that she could not send a note to shipping to ensure that I got the full count and no damaged ones, but she said that if there was any problem at all to call her (her name was on the invoice), and she would ship out mags to correct the problem. Well, I don't know whether or not she actually went ahead and spoke to someone, but I received all 100 mags. All were very nice (some - maybe 10 - were brand new in wrappers) and only one had a very slight bend in a floorplate, but it seemed to be only a cosmetic problem. Get some! You won't be disappointed."
– Bob
5.0 5
"Ordered 30 mags, figured the price was too good to pass up. Was very surprised to open the box and find 30 in the original wrapper G3 mags. Can't complain here and only took 3 days to arrive so hats off to CTD"
– gunguy
4.0 5
"I ordered twelve mags and just received them today. All mags are brand new. What a deal. My birthday's tomorrow so I'm ordering another dozen, yeeaaahhhhh."
– John
5.0 5
"ordered 20, 18 were brand new or so new i couldnt tell the difference, one of the used was pretty scratched up but still very functional, only cosmetic damage."
– colburn
5.0 5
"Great deal.Ordered 60, got 25 brand new in wrapper, the rest are in great shape...with only a few (10-15%) with notable rust on floorplates and/or followers. No dents, all fully-functional. My only complaint - I do not need anymore. Time for a magazine cleaning party!"
– JB
5.0 5
"Got a full 100 mags. 2 in original wrapper, 3 more in some other wrapper, most mags in half paper wrap, of those most in plastic as well. I wanna say that most of the unwrapped ones, and a large part of the wrapped ones have never been inserted into a mag well. I have at least 20-30 brand new or pretty close to brand new one. No bent followers, no bent floor plates... two magazines show a lot of wear, but thats it... crazy deal!"
– larry
4.0 5
"Bought 20, seven were nearly new, 10 were heavily used but serviceable. I stripped the last three kept the bodies and followers, trashed the springs and floor plates, too much rust. Good value, figures out to about 1.79 each."
– ptrpisser
4.0 5
"Out of 30, all had rust, 13 damaged with dents and scratches, 17 looked like they were never inserted into a weapon, but still require a lot of cleaning. I did not get any still in a wrapper. Over all great for the money"
– czar
5.0 5
"Ordered 28 mags, 20 was new in sealed plastic, 2 had a small dent worked flawless,6 had minor surface rust. Ordering more.."
– HK-91 Shooter
5.0 5
"These are great mags. Ordered 20 figured at a buck each what the heck. Several mags look new and never used and the others look used but still in good condition. Excellent!!!!"
– S. Ellis
5.0 5
"CRAZY DEAL! Doesnt even seem like it would pay for materials/mfg at $0.99 but no complaints! STOCK UP! Bought for CIA Cetme and some fit, some need minor filing. 50%+ were new in wrap! went to local gun shop and salesman tried to make me a \"deal\" on a \"20rnd 1964 mfg. unused mag for $20\" I laughed. I have multiple dated from 64-81 or 84 all in more than acceptable used/unused condition for $0.99! Even if half are completely unusable its still a great deal."
– CM
5.0 5
"I ordered 50, I did not receive any that were new in the wrapper, but I would say 90% looked like they had never been inserted into a weapon. I do not see any dents or surface rust on any of the mags I ordered. Very little surface scratching on approximately 10% of the mags. All are in better condition than what is being sold in my area at the gunstores for $10-20.00 a piece."
– Charles
5.0 5
"Just got my order of 25 of these clips. 24 of them are unused and don't show any installation marks what so ever. The other is slightly used and had a small repairable dent. These are the best deal I've gotten so far!! Don't pass them up if your in the market for clips. Will fit HK91/G3/CETME Sporter."
– Dan
5.0 5
"orderes 25 of them and over half NEW in pakage"
– mbuff
4.0 5
"Wow you cannot beat this magazine. It is not as high quality as the steel ones but these are so cheap there awesome. Buy a whole bunch 4 came in sealed brand new packages I am going to be buying more. Thanks CTD, keep these kind of prices coming and you will have all my business."
– Josh
5.0 5
"I was a bit skeptical of these mags when I bought them at this price. When they arrived, I found at least half of them were NIW. the rest were good/exc condition. I am thinking about placing another order. I hope the next batch is as good as this one!"
– tags
5.0 5
"This is the third order of these mags I've gotten. Twelve, fifteen and eleven. 95% have been brand new in wrapper and the rest are in really great shape. All I need now is another G3."
– John
5.0 5
"At this price, I usually add another 4 mags to each CTD order. As per usual, just received another 4 good mags. No new ones this time, but all functional and it's always nice to have another magazine handy!"
– JR in TX
5.0 5
"Ordered some steel mags from another company, due to poor quality decided to get 14 of these. Would agree with the descrition \"good condition\" none were new or unissued but all were usable ranging from almost new with very little dirt or rust to moderately so. Will clean up with little effort. For the price of a box of good ammo you can get enough mags to hold almost half a case of rounds. How can this not be a great deal."
– Keith
5.0 5
"I just received the latest order of these HK G3 mags and they function very nicely, 3/4 of these were in wrappers most were spotless, several in the wrappings were used as were the some of the loose ones. But all are in good to excellent condition. I purchased 20 this time and at this price it was a GREAT DEAL. I now have 40 of these. When compared to several of my pistol mags that go for $50.00 each these are well worth the cost."
– Larry Gray
5.0 5
"I just bought 20 of these and only one wasnt worth anything had a huge dent in the side and the follower wouldnt go past about 5 rounds but the other 19 were dang near new with very little wear on them... will buy again soon"
– SWINE STOPPER IN TX
5.0 5
"You're an idiot for NOT purchasing these, nuff said."
– Sir Slappy
5.0 5
"Just bought 20 of these. All were in excellent condition and a few were new. About the best bargain ever. These are factory HK G3 mags and top quality."
– Bob
4.0 5
"So I was all excited when I saw this deal, and read the reviews...not so excited when the box got here (shipping was real fast, thanks CtD!). I ordered 20 mags and about 18 are useable. I assume they are getting close to the bottom of the barrel because I rec'd no new mags, and all of them had rust on them. The two unusable ones had the bottom bent off, and several of my magazines had dents. Went ahead and gave 4 bullets because of the amazing good price. It's cool to think that some of the magazines dated from the 60's could have been used by my father when he was stationed in germany..."
– atti
5.0 5
"Just got my order in yesterday. Ordered 30 mags and 18 were new in the wrapper! 10 were excellent to like new and two were kinda rough, but I am very happy with the service and order. Get 'em while you can!"
– Steve
5.0 5
"Ordered 15 of these and 8 of them were new, the rest work great. I\uFFFDm using them in a CETME, and I won\uFFFDt buy a CETME magazine again. Not because they don\uFFFDt work, but because THESE fit and function so much better and for much, much cheaper. CETME magazines always wobbled in the magwell, these are solid. Just have to give a solid rap on the bottom when you insert them (Which is something I should probably get in the habit of doing anyway)."
– Geoff T, Kansas
5.0 5
"CANNOT BEAT THIS DEAL!! I order 8. 6 looked new. 2 were slightly used. ALL WORKED!"
– BigVern
5.0 5
"Purchased 21 of these to go with my Cetme. Got the package, 6 of them were brand new wrapped in paper then again in plastic, the rest were in very good condition minus one with is very rusty. 20 out of 21 isn't bad at all considering I'll just use the other one for parts. Ordered 10 more today along with 500 rounds of Silver Bear."
– Todd
5.0 5
"Ordered & recieved 36 mags, 13 of them BRAND NEW in the German wrapping. The other 23 in very good to excellent condition.Definitely good the better end of the stick. I'd order more, but maybe get a run of junkers & feel bad, so I guess I'll stick with what I've got, ( hmmmm....but maybe just one more order...)"
– cal50bmg
5.0 5
"I saw this deal and decided it was to good to pass up. I'm about 20 minutes from their store so ran up there and picked up 60 of them. Every single one of them was brand new wrapped in the brown paper and covered with oil. AWESOME DEAL CTD!!!!"
– 73MARO
5.0 5
"A great deal. Ordered a dozen and 3 looked new, 1 was well worn. The rest were almost new. ALL were functional. A great deal!"
– Willie
4.0 5
"This review is for all of you who have been thinking of buying these mags, just do it already! I just bought 30 of these, and sure some are a little rusty but nothing I can't clean up in about an hour. Every one of them worked in my G3, and at that price you just can't complain."
– fmdevil
5.0 5
"Slightly used? Hardly! Try practically brand friggin' new. I ordered nine. Six were brand new in wrapper/bag and the rest were in as good as shape, just slight wear/handling marks. Will definitely buy more"
– Justin
5.0 5
"I bought 25 of them figuring I would have some junk. I received 9 new ones and 15 in perfect shape showing a little wear. One had a little rust on it with a small dent but nothing that would stop the function of it and cleaned up good with some oil. I would say this is the best deal around on these, don\uFFFDt bother looking for a better one just buy a bunch and if you get some you are not happy with save them for parts and you still got a great deal."
– Driven To Build
5.0 5
"I've ordered these a number of times, probably have about 40 of them. Only one came dented, most showed only marks from storage, rest were only very lightly used.I'm thinking the bad reviews were from other vendors that can't match these prices."
– CharismaticMegafauna
5.0 5
"I ordered 76 mags and on 12/24 I received them. 30 were new in the wrapper. The worst or the remaining used mags had light rust on the floorplate and follower. I will be ordering 200 more..."
– M.A.C.
5.0 5
"I've ordered 10 of these total. The first order, 1 was junk so I tossed it. The other 3 were used but still in decent and working shape. My second order was for 6 more. 4 where still in the wrappings as in brand new and the other 2 used where in such good shape I couldnt tell them from the new ones. This is the best buy I have ever seen on these 20 rounders and they work flawlessly in my CETME .308. I will be ordering more."
– scuba steve
5.0 5
"I ordered 20 of these thinking that I would get a few that would work. When I opened the box I was shocked at what great shape these mags were in! 17 out of the 20 looked NEW, 2 had very very little were and one had 60% finish. A few did have a little suface rust on the floor plates but cleaned off very easy. This is the best deal you will EVER find on mags."
– Jesse
5.0 5
"I ordered two dozen mags. 22 of them were brand new in the wrappers, the other two showed only slight signs of wear. All of them work perfectly, I plan to order more."
– no junk here
5.0 5
"My wife ordered 10 for me for Christmas. All in oil paper and plastic wrap, appeared brand new. Gotta love it!"
– 1NCCCH
5.0 5
"Took a chance and ordered 25 more, ALL but one new in the wrapper, and that one was like new. Awesome deal!"
– gunnnnuttt
5.0 5
"WOW ordered 40 of the mags, 30 were brand new in wrapper.. gonna order 60 more...."
– john
5.0 5
"Just ordered 15 of these for my new PTR 91. Out of the 15, 13 are new used (not a scratch or sign of use at all) and two are pretty beat up. AWESOME buy!"
– Matt
1.0 5
"I just got five of these mags and they must be from the bottom of the barrel. They are rusty among other things, and look very used. I suppose you get what you pay for."
– byteme
4.0 5
"I used these mags in my CAI Cetme. Until then, I always used CETME original mags with no probs. Out of 110 rounds I got 3 jams. However, the more i fired the better the mags performed. I would recommend these for target practice but for tactical use you need to break them in good. I will try PTFE lube next time on the top of the mags and in the bolt carrier group."
– Glenn
1.0 5
"I've ordered two batches of these in the past and was very pleased. All were at least the stated \"good\" condition, and many were even better!Based on that experience and recent reviews I decided to try some more.Much to my disappointment, out of 30 mags, most were barely even in \"servicable\" condition, none were what I'd call \"good\" condition.At least a third were so bent or corroded that I would not even try to use them. I'm not talking surface rust on the follower or floorplate, several had full blown saltwater on aluminum type corrosion. There were only 2-3 mags even as good as the worst of my previous orders. To make it worse, the typical RMA FedEx label was not included, and the mags were just thrown loose in a box, with no packing materials at all. CTD is allowing me to return, and I may try another batch. But not up to CTD typical standards. But for now, it's looking like all that is left is culls."
– Alan
5.0 5
"I ordered 20 of these for my new CETME. Unfortunately only 1 fit. I think I have to grind the others down. But probably 15 of them were brand new in wrapper, the rest in excellent condition. A couple rust spots and very oily, but excellent."
– James
5.0 5
"this is a GREAT deal! I ordered 25 mags and 12 were new in the wraper, the rest look new and one was worn. all worked 100% in my cetme!"
– Fullassault
1.0 5
"After reading all the positive reviews on here about getting numerous mags still new in the wrapper, I ordered 20 of these for my HK91. When I got them in I was terribly dissappointed. I received no new mags, the majority of them I would not even call \"used, good condition\" as the ad states..."
– Stu
5.0 5
"This is a great deal. I ordered 12 magazines, and 10 were new in the wrapper. The other 2 were in good condition with only minor wear. All of the magazines fit and fed perfectly in my Century Arms CETME. For 99 cents, you shouldn't pass this one up."
– Kyle-Indiana
5.0 5
"Just received the order placed for 75 magazines. All I can say is that they are absolutely oustanding. Of the 75, 15 were still in the wrap, most appeared to be new or almost new, less than 10 showed any signs of rust on the floorplate or follower, and 5 had very minor dents that should not affect functioning. Products were shipped in a timely manner, and arrived as promised, although the packaging inside the box could have a litle better. A great value."
– North Idaho Shooter
3.0 5
"I ordered 50 of these based on the reviews of \"New in Wrapper\". I was a little disappointed when they showed up. None were new and they were just thrown in the box without any packing. All of them were very dirty. Not cosmoline either, we're talking a LOT of dirt. Most are in pretty good shape but several had rusty floorplates and followers that wouldn't just rub out with oil and a rag. Some had minor dents and stuff. Not bad for this price."
– Nick
5.0 5
"I ordered 12 of these and they all were new to excellent. There was minor oxidation on a few but 11 of them were clean and in the original wrapper."
– Nick - St. Louis
3.0 5
"Ordered 30 of these based on the reviews of \"New in Wrapper\". I was a little disappointed when they showed up. None were new and they were just thrown in the box without any packing. All of them were very dirty. Not cosmoline either, we're talking a LOT of dirt. Most are in pretty good shape but several had rusty floorplates and followers that wouldn't just rub out with oil and a rag. Some had minor dents and stuff. Not bad for this price."
– Jim
5.0 5
"Ordered 28 mags, 20 were long term storage wrapped and 8 needed some very minor work done to bring them to excellent condition, awesome deal. Just too bad the rifle system is subpar vs a FAL."
– xyz n Indian Territory
3.0 5
"Ordered 25. Received them on January 10, 2010. All had considerable rust on the floor plate, spring and follower. Yes, they are cheap, but I had to do a lot of wire brushing and painting to make them look good. The ones I got were nothing like the early reviews. One had a broken floor plate and some of them had dents. They were cheap and I think all will work, but they have been a lot of work."
– Mark
4.0 5
"I ordered 5 and they all looked new. 3 of them were in bags, the other 2 were used and had wear and tear on them. Good product. I will definitely buy some more!"
– Wolfguts
5.0 5
"What a deal !! Ordered 10 , 1 new in plastic , 3 new in paper , all others were in very good shape only a few minor scratches . Just ordered 5 more , get them while you can ! Now if we could get the ammo to go in them that cheap I would think CTD is stealing from the rich and giving to the poor !!! I promise you'll never get mags for another weapon for this price."
– Travis
5.0 5
"ordered 15 of them, all came in great condition. best buy for the money."
– chuck norris
5.0 5
"ordered 6 mags, received 5 new and 1 used, dented. disassembled them, cleaned them, light oil, beat out the dents, straighten the floor plate, reassembled, everything good to go, work great"
– WM.
4.0 5
"I got six of the aluminium and two of the steel. Don't bother with the steel - one is trash that I probably won't bother to try to recover (completely pitted). The other might be OK after a good cleaning. The aluminium ones are all in acceptable shape, with some having a few small rust spots on just the followers.All fit my CETME S just fine. A couple are a little snug and I'll probably file their catches a bit."
– Mustang
5.0 5
"Ordered 100. Gave 25 to a buddy. Only a couple were dented bad or mis-shapen and I tossed them. Some are very used but work fine. Some are like new. Most are good-excellent. I took apart each one and wiped them out with rags. Yes some of them are a dirty. There a freaking $1 each people sheesh..I've used about 20 of them and all worked fine in my PTR."
– Jake
4.0 5
"The HK/Cetme mags were never designed to be butter, but improvements were made. A common problem in the field with the steel mags was that soldiers oiled the followers for better feeding, but that traps dirt and dust which shortens mag functionality/life. The aluminium mags were the answer to a problem that didn't exist 'why are they so worried about the mags rusting?' The only oil these should see are LIGHT coats on the ferrous parts or when put in storage for a few years. Some of these have 1965 date stamps (some I recieved) so it is expected that the original oil coat will be gone and minor rust may appear, but otherwise these mags work great for light use; just don't go stepping on them!"
– Buggout
5.0 5
"just got three of these to go along with the three that came with my ptr91sc amazing, one had dirt on it still! all worked great, amazing deal. dont need to buy a bunch like other people, (when are you going to need 100 of these?)"
– Victim
5.0 5
"Ordered 20 9 new every single all the others were totally useable and will only need minor cleaning. I just ordered 20 more! Hope they are just like the last 20... Great deal and a great buy.. shipping guys send me the same again please."
– Cyber
4.0 5
"I bought ten. Four were in such great condition I almost thought they were new. Three were like new, very minor pocket burns on them. The other three are in great working order, and have that military used look to them. All in all it was a great buy for what I got and what I paid."
– Justin
5.0 5
"I took a chance and ordered 30 mags after reading all the reviews. I sure am glad I did. Every one of them was brand new and still in the wrapper. This is a great deal and I will be reordering soon."
– yellowfin
5.0 5
"I ordered 35 of these alloy mags, could not pass up the price. Of the 35, 1 was a brand new STEEL mag, 16 were new in the factory wrapper, 14 were new unwrapped, 4 showed signs of use. All of them were fully functional mags. I always thought I got good deals in the past paying $3- $4 a mag, this is by far the best deal I have ever seen on G3 mags!!"
– Lee
4.0 5
"Just got 16 of these today. 5 looked brand new with nice glossy paint. The others were older (1960's date), and one was totally rusted. They were all packaged very nice (except the rusty one). The rusty mag was the only reason I did not give it 5 bullets. For this price I am not gonna complain! Great buy will buy more again!"
– Dave
5.0 5
"I placed an order for 20 of these mags, on 2/24. I got them today 2/27. Of the 20, 14 were new in factory wrapper, and the remaining 6 were new as well, just not wrapped. Not a mark on any of them. Great price, and great shipping speed!! Thanks CTD!"
– drtybykr
5.0 5
"I just bought 50 of these mags and 21 were brand new still in the wrapper, about 20 of them look like they have never seen ammo or shooting or anything other than a box, and about 9 have seen some good wear. Fantastic buy!! For .97 this is amazing! My only problem is they dont have 10 bullets for a rating."
– Caleb in 'bama
5.0 5
"This is an absolutely *PHENOMENAL* deal. These mags fit and work just fine in the CETME's, too. Mostly aluminum construction means virtually no rust. There were a couple that were kinda \"well used\" (still work fine, though). But almost all of them were just lightly used or brand-spankin' new. Manufacture date ranged between 1965 and 1986.Cheaper Than Dirt, Inc. is really living up to their name on this one. I dunno how they pulled this one off. If you've got a CETME/HK-style rifle, get some of these mags. Even if you get some dirty ones, who cares? They're less than a buck apiece! How in tarnation do you beat that??Now, can Cheaper Than Dirt do the same thing with Ruger magazines somehow? :-)"
– Cowboy T
5.0 5
"I bought 30 mags 12 near new, 9 very good, 5 well used but solid, 1 bent but fixable, 1 minor rust, 2 small cracks at base. After some minor repair all function perfectly in my HK Clone. Best deal since the 90's military surplus glut, I want more."
– BigD
5.0 5
"Are you kidding with this price? The ONLY thing wrong with these mags is that they are currently out. I got 20, most were brand new and now I just want to get more. I can't believe shops and other online dealers want $10 or more each. Why would anyone pay that much? Oh yeah, they work perfectly in my FA91 too."
– ArizonaDesertDog
5.0 5
"I ordered 150 magazines. Of the 150, about 60 were new in wrapper and they all function 100%. The manufacturers are mainly HK, however I got a few from Portugal(FMP), Greek, and Norway and they have at least one of every year from 1961 to 1990. They are in great shape and are a great buy !!!"
– SNIPER 1
5.0 5
"On 3/18, I ordered ten of these mags. I got them today on (3/20). The first 5 were still in the wrapper, and the second 5 were not. I received two marked \"HK\". The rest (8) were un-marked. The manufacturing dates run from 1962 to 1990. Nine out of the ten mags were in great shape. The last mag will be a restoration project as it was quite rusty. It felt extremely gritty and had a ding on the side. The other nine mags fit my Century CETME, although I had to tap them in to latch properly. Other than that, I am quite pleased with the order of these magazines."
– Texan Raven
5.0 5
"A great item to take a chance on good or bad, but all mine were good!!!"
– Ranger
5.0 5
"This is a excellent deal on these mags. Out of 100 mags 80 were brand new in bags."
– Neal G.
5.0 5
"I ordered 8 Mags. All of them were smooth and new looking. None of them came wrapped in bags, but still looked good. All 8 fit in my CETME with a good tap on the base of the mag. I am very pleased. Shipping took 1 day."
– Wolfe
5.0 5
"Order 40 of these mags. 8 Came wrapped brand new, I'd say a dozen had rust on them, the rest normal wear and tear. I was almost upset until I remembered they're $1 each... Buy 'em."
– Untamo
5.0 5
"Beautiful mags I recommend you buy them you won't be disappointed at all in the condition or quality."
– scotthawkins18
5.0 5
"I just received the sixteen (16) mags that I ordered in breakneck speed. All 16 were brand new in the wrapper. Awesome, considering not too long ago these were selling around $35 each. For less than a dollar each, this is by far the best bargain anywhere. Thanks CTD!!! Keep'em comin'."
– Henry Bowman
5.0 5
"Looks great, what a buy!"
– mike k
5.0 5
"I ordered 20 of these. One was a brand new HK. 4 others looked new and all the others were usable except one. These actually fit my CETME way better than my original steel mag that came with the gun. Highly recommended."
– J.
5.0 5
"I don't own a G3 or anything LIKE a G3, but id say that for the price it's pretty cheap for a magazine!! BUY NOW!!!!!!!"
– bryce
5.0 5
"Got got 10 of these in today. I was expecting quite a bit of wear and look used... I am very surprised as 7 were brand new, still in plastic wrapper, and the 3 not in a wrapper. It looked like they had never been put in a gun ever. Not a scratch on them. All I can say is, best magazine deal I have ever made."
– Tennessee Shooter
4.0 5
"I ordered 25 of those for my CETME. 10 were in unused condition. 8 had some wear but they were in very good condition. 6 showed some degree of wear. All 24 locked tight in my gun. The 25th mag showed extensive rust on the follower and base plate. The spring inside was broken into three pieces. This one I had to throw away. Yes, I would have liked to see all 25 mags work but for the price. I thought that this was still an excellent deal."
– SMA From Michigan
5.0 5
"I purchased 20 of these and could be happier! 3 brand new in sealed wrapper, the rest worked perfectly in the Cetme. I'll be ordering more of these!"
– Greg
4.0 5
"I ordered 100 of theses mags I was skeptical as to the condition of the mags, but after reading the reviews I took a chance. I am glad I did.Out of 100 mags here is the break down. There are 61 that are NEW or like new, many in the wrapper. Twenty-two (22) are in very good to good condition, 10 are in fair condition, 5 have \"slight\" body damage but servicable. That leaves 2 mags: 1 was UNUSABLE, the base plate was installed backward and the tits on the feed lips are bent allowing the follower to tilt. It may work on the range, but I would NEVER count on it in a pinch. The last mag was STEEL and in good condition. I ordered the alloy mags. Nice surprise. So overall, it was a good deal. Get them now before they are gone.Keep your powder dry and shoot straight! Live free!"
– Diverdaddy
5.0 5
"Get them while they last. I ordered 40. Over half were new in wrapper with only 2 looking like they had ever been in a gun."
– Moregunsthanhands
5.0 5
"I read the reviews and also decided to take a chance and ordered 25 mags. The shipment was lightning fast. Opened the box and viola, nice shiney G3 magazines like new. I will order more and thanks CTD....Awesome product.."
– marvin
5.0 5
"I had to get one of these after realizing the magazine that came with my CAI CETME was trashy. It doesn't fall out like \"drop_free\", but fit in perfectly. It can't be beat for the price. Should work with any CAI CETME."
– H. Donna Gust
5.0 5
"These are great and most were new and some had a little rust and dirt. All it took was a little cleaning, and they were fine. If you have the gun you would be stupid not to buy these."
– John
5.0 5
"I ordered 30 mags just to check out the quality of the old surplus German military gear. At 97 cents a mag, it's a steal either way. Of the thirty I purchased 8 were still new in package(sealed plastic), and two new steel mags found their way into my fray as well, which was a nice bonus. Of the other 20 or so, a few had minor rust on the followers, but were easy to clean. Of all 30, only 1 is not usable due to the fact it has a dent the causes the follower to function poorly. I could probably fix it in a few minutes just by bending, but I will probably save it for spare parts. Tough to get locked into on the CETME, you really gotta smack 'em in but once they lock the function is flawless. Good buy, will buy again. If you can upgrade to the steel mags you might like the added durability, but at these prices you can grab dozens of both for cheap. One of the best buys on CTD, fast shipping as usual!"
– Jon
5.0 5
"Bought 50 of these mags so far and every one was in excellent to mint condition. Out of the 50, 10 mags were new in the wrapper."
– Korndog
5.0 5
"This is why Cheaper Than Dirt has no competition in shooting sports. All I can say about these magazines is wow! I got 25, all are new condition. For .97 cents, it is a truly unbelievable deal. They fit and function flawlessly. Not to mention how fast they arrived. Purchase as many as you can while they are still in stock. I plan to order more, at this price and quality, they will not last! Thanks for another great deal, you guys are the best!"
– Travis
5.0 5
"I just got The Blue Press from Dillon. They are offering these same identical mags for $9.95 EACH. Who has the better buy- Dillon or CTD? This is a \"no-brainer,\" folks."
– Texan Raven
5.0 5
"Awesome condition!"
– bystok
5.0 5
"Just got twenty of these, delivered faster than I expected. All were in excellent shape, with nothing but a couple minor scratches here and there. Excellent deal."
– Davey
5.0 5
"Got 5 of these for my FA91. All 5 are genuine HK G3 mags in unused shape. Definitely buy as many as you can because you can't go wrong with these."
– FA91
5.0 5
"I purchased 22 of them. All of them are new. No dents, scratches etc. I took a couple apart to clean them and they are like factory new. Since the first purchase I buy a few each month since I have a few 91's and have not had any problems with the mags. Get them while you can."
– Sniper
5.0 5
"I bought a few of these for my PTR91. They work great and plan on getting more."
– allen
5.0 5
"I bought 20 mags. Eight were still in the wrapper. The rest are very good with just some rust on the bottom plates. I would buy more but don't believe I need to."
– lost
5.0 5
"Ordered 25. Got 25 new in the wrapper! What a bargain. I ordered 30 more. They won't be this price forever. Remember the days when M1 carbine mags sold for a buck? Get the picture."
– Saltydog
5.0 5
"I have 30 of these. Every one feeds great. Fast shipping. Many of them were still in the original packaging. Fit my PTR-91 perfect, but for my Cetme they needed a little fitting from a dremel. (I think that's Century Arms' fault not the magazine) Great mags!"
– Billy
1.0 5
"I ordered 100pc of the alloy and 20 pieces of the steel. ALL JUNK. They came in 5 boxes total, all filthy and heavily used. Steel mags: rusty and pitted. No packing material in any box, steel and allow mixed together. Very poor job. If they had taken any time at all, they could have fit all the mags in 3 boxes max. All were half filled. Again, don't bother. These are so messed up it isn't even worth sorting through to see if there are any usable mags. ALL GOING BACK."
– BH Houston
5.0 5
"You can't beat this deal. These are actual H&K factory mags that are literally cheaper than dirt. The mags are in perfect condition, and work flawlessly like you would expect since they are H&K. The bodies are aluminum and in perfect condition. These mags have chromed followers. You may notice some rust on the base plates because they are steel. SO WHAT! At this price these are practically disposable."
– Jagermann
1.0 5
"I ordered 20 of these. To quote CTD \"used good cond\". Every single magazine i received was badly worn and rusted. This is a absolute misrepresentation of the product they are selling. I will contact them to see if they will accept a return an refund my shipping. I will update with results."
– milsurp425
5.0 5
"I saw the negative reviews but took a chance based on the positive reviews. I ordered fifty of these and man was I happy. Many were new in the pack and many more almost new. This is the best deal I have ever seen on these. I have been shooting for over 35 years. Thank you."
– john
5.0 5
"Ordered 15 of these mags. 8 Were 'as new', the other 7 had minor wear but cleaned up well. I will order more. Thanks, CTD"
– Sea-smoke
5.0 5
"I purchased about 20 of these magazines, and only 2 of them were used. None were dented and the steel ones had some rust, but nothing a little gun oil, and spray epoxy wouldn't clear up. A great buy."
– TX GUN OWNER
5.0 5
"I bought 20 of these about a month ago, and all were in good condition. I definitely received 10 of the 20 mags in brand new condition! If you have any doubts don't wait until these are gone. Just buy them! BTW just ordered 20 more (-_-)"
– Dsweets
5.0 5
"I bought 10 and for this price, I was not expecting pristine magazines. When I checked them, I found 1 new in the wrap, 5 that were near new with very little wear, and the other 4 showed use and wear. 1 of the 4 had a small dent, and some wear around the top. There was no rust on any of them. Needless to say, I am very pleased with these. Will order more."
– Greg
5.0 5
"What a great deal! I ordered 50 and 8 of them were still in the plastic packaging. The others had some wear, but all they need is a good cleaning and a fresh coat of paint. For .97 a piece you can't go wrong."
– Matt
5.0 5
"I ordered 30 of these mags. 9 were still in the wrap, 11 had never been in a gun, 7 were almost new, 2 were rusty on the floor plate but in great shape,and only 1 was dented up. What a deal! I'm going to order more of these!"
– Zeke
4.0 5
"great deal! However, best to pay for 2 to get 1! I ordered 10 and got maybe 6 brand new but not in wrappers, and 2 in good condition, and 2 banged up like hell, but prob ususable. Just be safe, order twice as many as you want, keep the good ones, dump the rest in scrap metal bin!"
– Unterseebooten
4.0 5
"Bought 40 of them. 8 were new in wraper and still in oil. 8 have rust on the floor plates and fallowers, probly half of those 8 will be un useable. The rest are rated at 80-95%. So out of 40 i got 4 duds, thats not too bad. Great deal"
– Brett
5.0 5
"HK factory mags for this cheap? What a steal! These mags are awesome...I have about 50 now, and only 1 was unusable.These instantly make a PTR91 worth it over FALs, and springfields"
– sepp
5.0 5
"A great deal. I bought 50 of them even though I don't really need that many. I will probably buy more."
– yogi
5.0 5
"I ordered 11 of these and was amazed by the quality. 6 of these look brand new, the rest look barely used. I will order more every payday, because I recall when other mags was this cheap, and now they aren't."
– mrweasl442
5.0 5
"Thought I better order a few of these in case our current regime decides to put a stop to the \"sanity\"! As usual got them super fast and 7 of the 10 I ordered didnt have a single scratch on them. BRAND NEW!! Out of the other 3, 2 were only very slightly used (better condition than mine), and one had what looked like shelf wear only on the flared stops. Ordering more in the next few days!"
– bfam
5.0 5
"I bought 20, 3 were a little rusty, but with a little work will be just fine. The rest looked new. Check the springs, most are a little rusty from sitting. Very good buy. I thought I was dreaming when I saw the price!"
– Washington
5.0 5
"24 of the 40 I ordered are brand new. The others all have some rust, but I believe all of them will work. Even if they don't...24 brand new HK mags for this price is unbelievable!"
– AJ
5.0 5
"I bought ten. I threw away two because feed lips were bent, and they're cheap. The two were probably new, two were dinged up, but functioned flawlessly. The rest were somewhere between. I'm a very happy customer."
– powpower
5.0 5
"For less than a dollar a mag and some elbow grease this is a good deal. Have 1 mag floor plate that needed fixing, 1 needed some serious cleaning and the rest needed light cleaning. All 21 fit in my cetme with 1 being loose. Will tweek it. All in all I am pleased."
– BabyBull
4.0 5
"I bought 50, none were new. 3 were barely used, most were used in good condition, maybe 10 have dents / heavy use. Most floor plates (steel?) have surface rust. The followers are impressive, 90% are beautiful shiney thick chrome / stainless, German overkill. The springs seem super strong, much better than surplus Austrian STG-58 / FAL mags I have. They seem stronger than the new DPMS 308 mags I have. I am not an RKI, but that seems to be a good thing. I only gave 4 bullets because the shill(s) on here said they got a few new mags, and all mine were used! ;)"
– nothing extraordinary
4.0 5
"The only reason I'm not giving this product a 5 star rating is because I didn't get any new ones in the pack. After reading all the reviews, I decided to throw the dice and buy 20. I was pleasantly surprised to get 15 good, solid magazines out of the 20. Mostly surface rust on the bottom plates. A few did have rusted springs though. No major dents. A little elbow grease and a wire brush is all it took. At this price, you can't beat this deal. Thank you CTD."
– Roy
5.0 5
"Amazing. Some are brand new in the wrapper still!"
– lilgdad
3.0 5
"For the price I really can't complain. However, to be frank most of the magazines I received are garbage. Ordered 15 and 3 of them are bent so badly I don't think there is any saving them. All the rest came heavily used, dirty, grimy, and all of them were fairly heavily rusted. If it didn't only cost me 20 bucks I would be rather mad but I have repaired 5 of them to working order so that's not bad at all."
– Greg
5.0 5
"I bought a few cheap used magazines, and that's what I got and more, while one was very used and functioning perfectly, the second one looked to have been loaded/inserted but never fired. The third mag however looked to have been just removed from wrapper prior to shipping. I got alot more than I expected on this order."
– Martin
5.0 5
"Stock up now is all I can say. Ordered 20 total. I received 8 still new in wrap, 6 unwrapped but 100% like new, not a mark on them, safe to say never even loaded or seated in a rifle, 2 had been lightly used and had very minor oxidation on the base plates, 1 was structurally perfect and oxidation free but did look like it had been used. The used looking one was of a glossy finish, the rest are a flat, phosphate finish. All are HK marked, a few had an addition number code and symbol stamped near the HK and year made stamp. A real HK guy might be able to explain the markings. In a word BUY BUY BUY"
– CPO
4.0 5
"I ordered 10 of these, none were new in wrapping like some have stated. They ranged from fair to very good condition. They are all usable, some just have some minor surface rust on the follower or body. Some were in near new condition. Overall a good deal."
– Cameron
5.0 5
"Ordered 30 and ten had rust on the bottom plate and a little on the sides, but ten more had very little rust at all (if any) and the last ones were still wrapped. If I had 2 CETME 308's, I would order more just because this is a great deal."
– David
4.0 5
"Its cheaper then a coke. Clean it up, and it works just fine. I bought a ton of em, and I am quite happy. You can't beat the price, you can't beat the quality, and you wont find it cheaper anywhere else. Yeah, some of them look like hell. But I am still quite happy over all. It worked with my CETME, which is insanely accurate."
– Crutch the Survivalist
5.0 5
"All of the mags I ordered are in great condition with just minor surface rust. It wiped right of with WD40 and a paper towel. They fit my CETME nice and tight. Buy them while they last."
– Tim
3.0 5
"I figured I would take a chance and order 20 of them. Luck was not with me. Not a single one was new. All twenty were used and out of the twenty, nice were rusted, dented, bent, etc. I guess maybe I will have better luck next try."
– TAZ
5.0 5
"I ordered twenty of these; one new in original wrapping, nine more never inserted, five of those where rewrapped in plastic, one was wrap in what seemed to be burlap soaked in grease or resin. I washed it off and it\uFFFDs perfect. Three more had moderate use and the rest were pretty bad with heavy use and some rust. Just buy twice as many as you need. An excellent deal."
– Vigilante
5.0 5
"I ordered ten and only one had a \"slight dent\". The others were perfect. Just a quick lube and they were good to go."
– eric
5.0 5
"I bought 7 of these last week: 1 new; 4 didn't seem to have any flaws or use; 1 saw some use; and the last one is up for target practice. All in all, 7 mags for $7 and 6 of them FMC. That's a deal in my book. Will be ordering more."
– TEX
4.0 5
"At such a low price there's nothing to complain about here. I ordered 100 mags. 1/3 of the mags came in some sort of corn husk paper and looked to be brand new and never used, but they had some light rust on followers and base plates from storage. 1/3 appeared to have experienced light use and the remaining 1/3 are essentially junk; dents, extrememly worn feed lips, bent base plates, severe rust, etc. Regardless of the condition, I plan to spend a few hours disassembling, scrubbing, lubing, and re-assembling all of the mags. Even the brand new mags needed a good once over to remove surface rust, adhesives, and old grease. At the end of the day I have 60-70 excellent/good condition mags. The remaining mags will be stripped down for extra parts (springs, followers, and base plates can be salvaged). Moral of the story: purchase about 1/3 more mags than you think you'll actually need and then plan on spending some time cleaning them up."
– Hong Kong
5.0 5
"I ordered 40 of these mags three days ago and the FEDEX truck just dropped them off. Of the 40 I ordered, 24 are new wrapped in paper, 7 are new condtion with no wrapper, 7 have very light surface rust on followers or floorplates, and 2 of them look used with some rust, but are very usable. This is a great deal on Mags for your PTR91 or HK91. I am going to order another batch just so I have plenty on hand."
– JT
5.0 5
"Great deal. Out of 20, half were new in wrapper. Out of the remaining half, only a couple magazines are going to need some work."
– Dennis
5.0 5
"Wow! I got the mags today. I'm buying a CETME tomorrow! Excellent!"
– kurt
4.0 5
"After reading previous reviews, I decided to order the magazines. The first batch was good enough to cause me to order 10 more. Condition varied from well-used to new. All fit my CETME. After I disassembled and cleaned the mags, I felt that I had received a heck of a deal. I'll buy more."
– Jacktales
2.0 5
"I ordered 40 and I received 39. One was new in the wrapper and the rest were used in good condition like described. Slight rust on the follower and base plate. I hoped I would get more than one new mag but oh well. CTD is shipping me the missing mag."
– Regular Guy
4.0 5
"I ordered 10 mags and recieved 1 new and 9 service worn mags in good working order. Scratches on the finish won't make the mags malfunction."
– Shadow9
4.0 5
"Purchased a dozen. 3 came unissued the remainder just needed TLC. None gave any feeding problems. At $1.00 per mag, forget about it!"
– Surplus Nut
4.0 5
"Just got 10. None were new, but all were in good condition. Some had surface rust on the floor plates, but that's nothing 10 minutes with a copper brush won't fix. All functioned just fine, the followers did not stick and feed well. Just as good for the CETME as a G3, and for 97 cents a pop, you can't beat 'em. Get 'em while you can."
– Corrine
5.0 5
"I ordered 30 of these and 10 steel most were in awesome shape (brand new). Regardless what they look like (I don\uFFFDt care) all of them functioned perfectly. I will order more"
– *COLT*
4.0 5
"I rdered 25 and figured I will have to use some for parts. I received 8 like new, 10 in very good condition and 7 with moderate finish wear. All of them function fine. There is a little dust and minor rust on baseplates. For less than a dollar each they are a great deal. Order enough to offset the shipping costs."
– pm in ut
5.0 5
"Ordered 10 of these because of the price. These CAN fit the CETME, with a little help from a file. Also be prepared to clean the springs. Some rust but hey, these things have been around awhile, '62-'79. Spot on for shipping time. Keep these good deals coming CTD."
– DOC Guy
3.0 5
"Just bought 40 of the aluminums. How can you go wrong for the price? Well, you can. Of the 40, 16 are not serviceable. Mostly severely dented areas where I would not trust them. I am going to break them down for parts. All the bottom plates were rusted except for 5. I am going to call 20 good/great, 4 decent, 15 poor and 1 that looks like a tank ran it over, the bottom is shifted as it got pinched between something heavy. Order twice as many as you want and you are still doing well."
– stropp
4.0 5
"Ordered 20 of these mags, 13 appeared in very good condition and had little or no wear or rust, 6 were sealed in plastic and appeared new except for one which had some wear, 1 had considerable wear. Will disassemble and clean most before using. Dates range from the 60's to 90. Not a bad lot for less than a buck each. Only gave 4 bullets as I will not be able to shoot these mags until I buy a PTR 91 and see how they perform."
– Joe
5.0 5
"Bought a bunch hoping to get over 50% good. Found they were all good. Some with worn finish, but in great shape, most in like NEW condition. Plus, these are genuine HK G3 aluninum mags. At this price, compared to the prices of other platform's 20 round .308 magazines, this deal is certainly \"Cheaper Than Dirt!\""
– MDS
5.0 5
"I was totally shocked when I recieved my order. I had read a good many reviews on these mags and had no idea what to expect on arrival. I opened the box and was in total Shock. The first had a little rust on the bottom plate, the next was wrapped in brown paper, PERFECT. Another in a plastic wrap and the rest were better than gunshow stock and were not $15 to $20. I couldnt believe it. You may have gotten a bad batch for me I cant wait to order more. Only a little rust and I mean minor at the most. No dings no nothing."
– Thomm Thumb
5.0 5
"Ordered 20. Received 20. Only 1 unusable. 15 were new. The remaining 4 only slightly used. Bought these for a CETME. Only slight modification necessary. A quick application of a Dremel and, Voila, .97 cent combat ready .308 mags. Did the final disassembly, cleaning, and then a quick trip to the local Mom-n-Pop hardware store netted a can of flat black camo paint. Thorough degreasing with Simple Green followed up with denatured alcohol. A couple light coats of flat black, an hour in a 200 degree oven. There it is. A weekend of enjoyable work, a chest rig full of top grade mags. Coupled with the trademark superior CTD service, (ordered yesterday, received today, as usual)...gives it a 5 star rating. I know...I know...but you had to toss one in the parts bin. So what? States clearly...USED MAGS...Got more than I expected. I always keep my expectations low when dealing with surplus equipment. That way, no harm, no foul, right? Want 100%? Buy new and suffer the boredom of not having anything to do or the money to do it with since you paid 20 times the cost for new stuff and are broke for the week."
– Texas Patriot
5.0 5
"For the price of one M1-A factory magazine you can have 40 of these gems. Both times I ordered 20 magazines (People need to stop calling magazines 'Clips') I only had to cannibalized three of them for parts for the rest, and a large portion of them where un-issued and still wrapped in paper. I\uFFFDm glad I own a PTR-91; there are so many good deals on surplus parts and magazines like this for them."
– Chaos
4.0 5
"Ordered another 50 because..well..why not? Two came new in wrapper, two were pulled for dents, one was pulled for a floorplate that probably wasnt bent enough to cause problems but just looked bad. So, out of 50, there were 47 good ones. Or, put another way, 6% reject rate, which is pretty much exactly the rate I had for rejects last time I ordered 250 mags. However, put that into perspective - I bought 50 mags at $0.97 and got 47 good ones...the bottom line is that I paid $1.03 per usable magazine. You really wanna cry about a six penny difference per mag for something that is a genuine HK product? These things have been banging around in cargo containers, bins and whatnot for forty years...buy twice what you think you want and even if you have to cull out 20% of them you are so far ahead of the game in terms of price that it doesnt even matter. As an aside, it looks like CTD has gotten their act together a little bit since I received 10 loose mags and two nicely boxed pacakges of 20..so, to avoid dings in your mags from transit, order in increments of 20. Only four stars because CTD really needs to work on their packaging for shipping."
– Commander Zero
2.0 5
"Actually would have paid more for better condtion. I ordered 50 and did get 51 (which is a good thing). I think they felt bad for all the crap they sent me. Not one new one. There are a total of 6 that are usable with just a quick clean up. The rest well lets just say I have allot of work to do. 90% of the bottoms are rusted and some of the followers actually have rust as well. Several are dented and I just will not use those ones. The rest will be tore down and repainted and bead blasted. This is actually more work than I planned on but for the price what do you expect. I was kind of going off other reviews. I wouldnt give these a grade II though. They are for sure more worn than that. I figured out of 50 I would get at least 35 in really good shape."
– Gnsrfaster
1.0 5
"I ordered 15 of the steel. 6 were total junk the rest just a hair above total junk. Not at all what they advertised. Not up to what I have come to expect from CTD."
– rk329
4.0 5
"I ordered 50 of these mags. Of the 50 mags 2 were junk, 8 were like new. Of the two that were junk I was able to salvage the springs, followers and floor plates. Most of the mags had a little rust on the followers and floor plates however it was easy to clean up. The rest were in used condition with finish wear but no defects. The dates on the mags varied from 1967 to 1990. I am very happy with my purchase."
– ININDIANA
4.0 5
"I ordered 20 mags. Out of 20 mags, 12 were brand new, 6 were barely used, 2 had heavy rust, but at this price, who cares?"
– lurch77
5.0 5
"I purchased 25 clips. Shipping was very quick. 5 were brand new and the rest were in good condition. They all look functional. Some have small amounts of rust on the bottom. Overall, a great deal. I bought a lot because I thought I would just throw the bad ones away. I didn't get any bad mags and I am very pleased. Now if my .308 would get here already. I own several guns but have never owned more than 4 mags per gun. Having 25 is awesome! Thanks, CTD."
– MrBen
5.0 5
"Good stuff. I ordered several of these and they look great. Some were wrapped, some weren't so I checked the unwrapped ones and they function fine. Plan on getting more at that price."
– A Dude
5.0 5
"Bought 5 figuring one or two would be for parts, all 5 were in great shape only minor corrosion on the floor plates and a spot or two on the follower bodies were undented and found a coin in the 1989 mag, some GI must have stored his change in it lol. Mags ranged in dates from 63-89 and the coin is a cool plus even though it's a penny."
– tackleberry
5.0 5
"Bought 20 and all work fine, some unused some well used. Considering these mags are almost 50 years old, they are in great shape. Tip, my bud was a paratrooper in the Bundeswehr and said they always took their g3 mags apart and greased the inside of the mag body lightly. He also said they preferred the steel mags."
– displayname
5.0 5
"Ordered 20 mags about half were new one still in plastic bag, two were dented and two had bent floor plates all four were easy to repair, great mags for the price, I will order more."
– fireeater506
4.0 5
"Got 10, seven were nice, 2 had very light surface rust on bottom. All appear functional. One sent was steel! Great price, will order more soon!"
– Tom
5.0 5
"I don't own a G3...yet but for $.97 I couldn't pass up this deal. I ordered five magazines, three out of the five were stamped H&K and date coded from 1964-1988. The condition of the magazines is superb, only one showed minor wear the other four looked like they were just made yesterday. The quality is what I would expect from H&K and Cheaper Than Dirt, I will be ordering more."
– GRinier
4.0 5
"I have had my 91 clone for a long time, and have always been skeptical of aluminum mags, but at .97 a piece, I figured what the hell. As with the steel mags, I have seen some folks make out alright, while others, unfortunately, ended up with some pretty beat up mags. I, however, seemed to do just fine with the three I ordered. One arrived in nearly brand new condition, and the other two, while still showing signs of use and wear, were still very serviceable. At .97 a piece, it's definitely worth adding a couple of these to your next order if you have a 91 or clone."
– Viking Raider
5.0 5
"Ordered another 95 mags when they got more in stock. 12 are new in the wrap. 85% are new-like new condition. The rest are very-good condition. 2 are rough and might get salvaged for parts. This batch of mags are in much better shape then the last bunch I ordered in Dec. Do the math fellas, this is a great deal."
– 19DScout
5.0 5
"Bought 20, 18 were in brand new condition. 2 may have seen some light range time but are very serviceable. I ate the bear on this one."
– 0369oldgrunt
5.0 5
"I read most all of the 252 reviews - Some good, some bad, but most so-so. I bought 30 magazines to try to get 20 usable. All 30 were excellent. 10 were still in the wrappers, 10 were new just not in the wrappers, and 10 were a little scuffed up. A couple of the scuffed ones had some surface rust on the followers. Thanks."
– John - Florida
4.0 5
"I bought 20 last year and 15 were new in paper wrappers, from Germany is what it looked like. Just bought 20 more and none of these were new...none. Good shape for the price."
– Wade
5.0 5
"Had great fun with new mags. Ordered five, two where still in wrapper but all were in good condition. I have a cetme and they fit great with a firm tap. Great price cheaper than dirt!"
– T.R.
5.0 5
"I ordered 14 for my Cetme and not a single problem with them after months of use. Much lighter then the steel ones that came with my rifle."
– Damian
1.0 5
"First off, let me say I LOVE CTD! They have excellent prices, fast shipping, and the best customer service one could ask for.......The mags are so so, some ok, some bad. most all were usable."
– H&K builder
4.0 5
"These magazines are great. I ordered ten. Two had rust on the elevators so I needed to do some TLC, and one had a large amount of carbon on it like a round went off in the magazine. Oldest one I have is from 1963, best one out of the lot, too. Cleanest and best finished."
– OmegaForte
5.0 5
"So I Purchased these on a Wed. and received them on the following Sat. (Amazing Shipping) Ordered 40 of them: 24 came in used but very good condition (just needed cleaned and lubed) 9 came in ORIGINAL FACTORY packaging... 7 needed to be wire wheeled (for small amounts of rust, mainly on follower and floor plate) So out of 40, 33 were in good enough shape to be used immediately and 7 needed touched up... Awesome!!!"
– NNarms
5.0 5
"Ordered 30 last week, all in very good condition....VERY superfical mag floor plate rust, cleaned up to almost new with a little break free and #0000 steel wool rub down. Rememeber 30.00 S. African .308 battlepacks, these may be the days for G3/Cetme mags. When G3 O.D. stocks are back in stock, I will order more mags."
– Finley
4.0 5
"I ordered 20 on 3-11 and received them 3-12. (I live in the Houston area.)5 were new in wrap. About 10 showed very little use. About 5 were well worn, but not junk. Most had just a little surface rust on the follow & floor plate. A little oil and they will all be used, although I'm tempted to keep 1 or 2 in the wrapper."
– TexSquirrel
4.0 5
"I received my order Monday; the order was packed fairly well. Of the 20 mags I ordered 9 were new, 7 were almost new and three needed some work. One was missing. Called CTD on Tuesday and talked with a rep and it was on its way that day. A few of the mags needed some work to fit my Cemte but by the end of the night all were working well and I had no other problems."
– Ken
4.0 5
"These are a great deal. Ordered 6 for my CETME. All six were like new. A few minutes with the dremel and all fit perfectly."
– VOODOO6138
5.0 5
"Bought 20 of these and they all fit and function great. I will be ordering another 20 or 30 here very shortly."
– socom2303
5.0 5
"Said what the heck, I will order 20. 13 were new in wrapper and other 7 looked fine. Minor rust on floorplate but that will wipe off. I mean really, 97 cent mags? Well worth it. Just wish my M1A would take 97 cent mags......"
– Otto65
5.0 5
"I ordered 10 of these mags 2 days ago, and they are already here! I wasn't sure what to expect as some reviews are great and others complain about quality. These are freaking new, and if not new, then these mags were only taken out of the package to be gently rocked and caressed before being lovingly placed back in their protective wrapper! My birthday is next week and I'm buying 50 more of these, WINNING!"
– johnb007
3.0 5
"Got 20 like most people here, 3 were in wrappers, 7 were decent looking, the other 10 were rusted, bent, beat up, and just nasty looking. 4 of them don't even work. But 20 dollars for 16 working magazines is ok with me. Only 3 bullets because i received non working products and most of them were in bad shape. But what do you expect for .97 cents?"
– CETME
5.0 5
"After reading others reviews, I bought 15 of these thinking I might have to piece some together. Well when I got them 7 of them were brand new and all of the rest of them were in near mint condition. You will not find a better buy on the market!"
– essayons
5.0 5
"i really don't like to buy mags from here because half will be good and the other OK but I tried these because they were 99 cents and even the other cheapest you can find them, they are about 2.98 so Ii bought 24 and 15 were brand new still in the wrapper. 7 were rusted just a little on bottom but still work good. 2 could not be fixed. The first time I bought mags from here and was happy with them"
– richard
5.0 5
"The reviews are true. Just got mine. Some are better looking than others so if you don't care about outward appearances these will definitely do the job. I did find some rust on some of the the followers but only small spots of it. These are in pretty freakin good condition, all of mine function. They are a lil bit dirty so don't be surprised after all they've been sitting in a warehouse. :)"
– S
4.0 5
"I bought 15 of these and they were all in great condition. 5 of these were new in the wrapper the rest had minor wear around the contact points but that's to be expected. I will definitely be buying more."
– anon
5.0 5
"I gave these 5 bullets cause this product is better than described. I ordered 10. 5 were new, 5 were used but in useable condition right out of the box."
– For2nato
5.0 5
"Ordered 16 so far, 12 were in excellent condition (some not even used), other 4 had signs of were but were in good working order. Best price ive seen and best condition. Ordered around noon, and UPS ground arrived the next day by 1pm. Fastest shipping ive ever gotten anywhere. Excellent service, thanks CTD!"
– Mark
5.0 5
"I bought 10 of these and I was immediately impressed with how good they looked! Other than a few surface scratches, they all look like new. I want more!"
– MaximumEngineering
5.0 5
"I have bought these mags on four different occasions. I have yet to receive a bad one. They are either in very good condition or else they are brand new. I'm ordering more."
– John Walsh
5.0 5
"I bought 20 Mags for my PTR-91 and everyone looked like new, with no dents or problems."
– Brian
5.0 5
"Again I purchased 20 of these mags. One was brand new and the others were in great shape. All I need now is another G3. Get them before they're gone."
– John Walsh
4.0 5
"Ordered 10 all were serviceable. This was a good deal but what\uFFFDs up with the exorbitant shipping charges CTD! Delivered with a box of Golden Saber shipping was almost $19. I was going to order 200 rd. 7.62x51mm DAG and one XDM .45 mag. the next week and shipping came to $29! I went to Mid Way for the same thing and got it for $17 shipping. Even though Mid Way was higher on the product I still came out $20 cheaper! Sorry CTD I like you but until you get this shipping thing under control I have to go elsewhere."
– Ben
5.0 5
"I ordered 15 mags; two were new in the wrapper, two had been in weapons, and the other 11 were like new with only wear from rubbing against other mags in the box. As for corrosion, no real problem with these; two followers had a few pits and only very minor dusty rust on seven base plates easily wiped away with cleaner. IMHO, you can't go wrong here, Thank you CTD!"
– J.R.
4.0 5
"Ordered 30 of these and couldn't be happier. In the order I received 5 new mags still in wrappers, got some that were completely useless but it was expected. Just getting those new mags makes the buy worth it."
– Dave
5.0 5
"When I saw these for so cheap I thought there must be a reason. I was wrong! I ordered 20 of them and all 20 are in great shape, half are even new! If you have any doubts order them anyways, you wont be disappointed!!!"
– Brett
5.0 5
"Ordered 30 aluminum mags, got 20 still in plastic wrap. I even got them in sooner than I expected ! Very pleased.........."
– Jamie
5.0 5
"Once again a nice batch of mags! Even got one of the mystery \"P\" marked mags as well as a Norwegian marked mag."
– display name
5.0 5
"All I can say is wow.Ordered 100 aluminum mags- 44 are still in the wraper, rest will need a little tlc but what do you expect for surplus mags. Its almost like my birthday and Christmas all rolled into one.Very happy with everything I got from CTD!!!"
– snowman71
5.0 5
"I ordered a handful for my cetme and they all work....sweet."
– jibola
5.0 5
"10 more arrived today. ALL GOOD!"
– MaximumEngineering
5.0 5
"I ordered a bunch of these and they all looked brand new! No rust, dents, or dirt. Fit well in my CETME with all working perfectly."
– Kilowhiskey
5.0 5
"Just recieved my 20 mags today, only 2 showed any kind of wear, and only 1 looks like it needed cleaning. Most looked as if they never saw a magazine well. Clean and no dents. If I had friends with CETME or HK91, I would buy up more, but heck dont see myself using all 20 of these."
– Nauner
4.0 5
"I received my mags and they where in great shape. No major dents, dings or other issues. They all fit snug and secure in my Cetme. For the price you can't beat it, already ordered more.Thanks again CTD!"
– Martac
5.0 5
"Ordered 60 mags and they were here in 2 1/2 days.6 new in wrap, 20 like new, 34 very good, one floorplate needs to be straigthened. Great buy!"
– smtote
5.0 5
"Bought forty of these for my CETME. They work great, all of the mags fit and lock up tight in my rifle. All look new."
– Gunslinger
5.0 5
"For the price you cannot beat it though shipping is high. Most are immaculate but if there is a dent beat it out. stretch the springs and if you wish to repaint the ones which show wear then use a paint that is enamel and spray the flat or gloss finish.Heat the oven on bake at 300 degrees and leave for 20 or max 30 minutes and heat without the springs installed. Now you have as perfect a mag as a new one for much less. I have practiced this and have none to fail yet."
– Skipper
4.0 5
"Received four mags yesterday. After reading some reviews I got worried that since I ordered a small amount I would run the chance of getting all bad ones. One looks as if it\uFFFDs never been touched, the other three look like they were used maybe once. They fit in my CETME just fine haven\uFFFDt gone to the range yet so not sure if they'll feed properly.."
– Chris
4.0 5
"Just like the reviews I read that made me decide to purchase for my PTR91F, these are a steal! Only one out of 100 is unusable -- looked like it had been used for target practice and even had a lead shot inside- but good spring, plates for spares. Several brand spankin' new wrapped in oil paper and inside plastic ziplock bags. Rest are in good shape. Can't beat the price and a great reason to look into purchasing a HK91/G3 or clone. Were it not for the 1 bad mag, this is a 5 bullet review."
– Rupert
4.0 5
"Just got my 10. 2 new in wrap. 3 less new. 3 in good shape. 2 crusty, but can be cleaned"
– Eric
1.0 5
"Ordered 50 magazines, only a few are in usable condition. Several wrapped in plastic like new mags, but when unwrapped they were severely used mags. Mostly junk, even at this price- don't waste your money."
– Frank
5.0 5
"10 work flawless, 7 are a super tight, but work (makes them harder to get out, and you have to smack 'em in good to seat them) 3 won\uFFFDt lock in at all. (those 3 look to be in mint condition). I will at a later time measure to find the actual differences and maybe with a little dremel action find they function as well. Overall I would suggest this product for any CETME owner."
– Nauner
5.0 5
"ordered 20, 4 were new sealed plastic bags the rest were slightly used with only one showing normal ware all were functional and fit nicely in my ptr, i'll probably order around 80-100 next time to make up for CTD's crazy high shipping and handling."
– PTR 91
5.0 5
"Bought 10. Three were brand new, seven were slightly used. All could have had the oil wiped off and slapped in the mag well. Dates ranged from 1963 to 1987. Seven were marked G3 HK. Two were marked G3 with a K next to it and a crown over it. One was marked G3 with a diamond in a circle. Excellent value for the price. I would have ordered a larger quantity to make the shipping more tolerable, but any quantity larger than 10 on that day, made it go into Back Order Status. Shipping though expensive, was fast. Ordered on a Thursday and they were on my porch Saturday morning by 11:00 a.m. Will definitely be buying more!"
– Gunfixr23
5.0 5
"I ordered 100 mags and received 105 with 11 being new in the wrapper and only 4 mags in less than a grade 2 condition. 1 of the 4 had tape on it, the other 3 had some minor dings, but in all the mags looked unused. A great deal for the money."
– Brian
5.0 5
"Just bought 10 of these after buying 5 of the metal mags, the metal mag were all rusted and wouldn't feed right.. These aluminum mags were all 10 grade 1 condition like new and load easy and feed great in my CETME.. buy as many as you can before I place my next order."
– Captain Sean
5.0 5
"These were almost new. I got 20 and I'd buy more if I had room to store them. Dates ranged from 1963 to 1984 and all are original HK manufacture. The ad said grade II, but I would rate them as grade I. Buy 'em while you can."
– John
5.0 5
"Just received my third order. Magazines were in very good to unissued condition. Thumbs up to CTD on this great deal."
– Jacktales
5.0 5
"Quite possibly the deal of the year. I know in 10 years we are all going to look back and say \"Remember when G3 aluminum mags were 97 cents?\"I ordered 75, got them in TWO DAYS! 5 new in wrapper, 3 dents, 1 throw away, rest mildly used and one BRAND NEW STEEL MAG. A few had light surface rust on floor...but no big deal. For 97 cents who cares? Thanks CTD!"
– Cameron
2.0 5
"Most of the mags are in good condition.Some are rusty on the follower and on the bottom of the mags.Some dings and nicks- mostly the black is partially rubbed off."
– H&K G3 20 rd Aluminum mags
4.0 5
"Ordered 50 of these on Wednesday at 8pm. They were on my doorstep Friday at noon! The mags were listed as grade II, most of them seemed to be new old stock, never loaded. About 10 were heavily used, still had alot of carbon on the followers, 3 or 4 had minor rusting/pitting and one was bent. ( will use this one to figure out how to disassemble). Overall very happy with order, now need to get my PTR's"
– Hadite81
5.0 5
"Took 3 days to get, ordered 20, all unissued and in like new condition. Very pleased, will order again."
– Abby
4.0 5
"I got 10 in the mail today and was a bit sad to see that I didn't get 1 new one... Most of them only show light wear and all seem to function proper in my Cetme. I can't really complain though. My mags being pretty doesn't concern me that much :)"
– Robbie
5.0 5
"Ordered 50 mags, two new in wrap, 47 excellent like new. One looked like it had been drug behind a truck and then thrown into the ocean for a week. But for 97 cents, these are a great deal.3 day delivery to boot."
– jetto
5.0 5
"I read the reviews both good and bad. Decided I'll get 6 and see what arrives. They all were used and dirty but very good shape, I soaked them in Dawn dishwashing liquid and hot soapy water. They look almost new and function fine. I'll be ordering more. At less than a buck apiece you cant go wrong."
– Chuck L.
4.0 5
"I just purchased a PTR 91 GI and needed some extra mags. For $.97 each, how could I go wrong. I was surprised when I opened the box. 12 of the mags were new, 4 only required wire brushing of the follower to remove minor rust. I mixed and matched springs, followers and floor plates on the last 4 and ended up with two more that were excellent. The last two I would rate grade II and are perfectly functional. Great job Cheaper Than Dirt:)"
– VFR
5.0 5
"I bought 15 of these and they all fit and work in my Cetme perfectly. These are in better shape then some I saw at the gun show for $10.00. Most are in hardly used shape and a few seem to be new and unused. I like these much better then the steel Cetme mags that I paid $9.50 for. Now I have 15 great mags that work perfect for under $15.00!"
– scottoworn
4.0 5
"I ordered 25 magazines yesterday and received them this morning! Out of the 25, 5 where brand new and still in a plastic wrap, 17 looked used but were in great shape, 2 has very noticeable rust on the followers and body and 1 looked almost brand new but was crushed on the bottom end. Will I buy more, hell ya and it will probably be today! I also have an M1A and the magazines cost over $50 each and for less than $1 get a great H&G mag."
– Judge
5.0 5
"Bought 20 of them since they're less than a buck. 15 of them came in good shape. 2 are like new. 1 is new still wrapped in wax paper. Only 2 were in poor shape but just because of the followers were rusted pretty bad. But I know a site that sells just the followers and then those mags will be in great shape. Well worth the money."
– Day Walker
4.0 5
"I started with 10 of these. I figured that for $10 I could afford to experiment. I now have 50... About 1/3 of them were near perfect, no scratches or dings whatsoever, almost looked new. Another 1/3 were slightly used with minor wear. The other 1/3 needed some work. They were dirty, scuffed and had some surface rust. I disassembled every one of them, used some WD40 and a rag on the exterior and interior of the body and then used some WD40 and steel wool on the springs and followers. It took a bit of work, but for $50 I'm extremely happy and would not be afraid of using any of them if my life depended on it."
– Ron STL
4.0 5
"I figered for two bucks it would be worth buying a few of these to put back and convert for my CETME when I finish building it. They came in and were extremely dirty with alot of fine sand inside them. A little soap and water and they were fine. I wish they were still less than a buck though."
– RonPSL
4.0 5
"I bought 10 of these for my CETME.They perform great,without any troubles. Well worth the money for range mags, give them a try!"
– John
5.0 5
"Bought a couple of these for my PTR. They are definitely grade 2, many scratch marks, kinda dirty, but hey, they're used surplus mags and they're $2. They work well so far, feed fine, eject fine, they're a good deal."
– ptrman
4.0 5
"I bought 12 for my CETME. 3 or 4 of them were bent or crushed, and all had to be cleaned. 8 had rust on the followers and springs, but they all cleaned up well with some elbow grease and all lock into my rifle with limited wiggle. Next time, I will spend the extra dollar for the steel ones."
– drew
5.0 5
"Still the best deal going. Periodically I buy a few when my defense budget will allow. In a few instances, the mags needed a little cleaning and very minor rust removal from the spring and follower to bring them up to speed but that's the exception. CTD hit a home run with these magazines; great price and quick shipping."
– Jacktales
5.0 5
"Just purchased 5. 2 were used but in good condition (just a little rust discoloration on the bottom plates), 2 were like new (it doesn't appear they've ever been used), and the last one was brand new and still in the original oil paper. Great buy and, as always, super fast shipping."
– Mark
5.0 5
"Ordered 10 of these on monday, recieved on thursday, 2 of them were like brand new, 6 showed minor wear and scratches and 2 had minor rust on the springs and follower. With a little steel wool and elbow grease and light oil...good as new !!!I got these for my CETME and they fit perfect, you can't beat the price. Our local gun store wants $9.00 ea for these, looks like I just saved my self about 80 bucks I can spend on more shooting gear !!!Thanks for the quick service, well time to go make noise and break thingsCraig"
– Craig az.
5.0 5
"Bought 15 mags and just got around to trying them in my CETME. None of them fit. After a quick inspection of my CAST CETME receiver, I noticed that the mag well was not square or flush with three stop tabs on the sides of each G3 mag. Simply file the three mag stop tabs on the mag catch side of the mag just a hair, then square the cast receiver. All mags now fit my CETME after about 2 minutes of tweaking each. All are snug and feed perfectly! Buy these up asap!"
– .308 all day
5.0 5
"Ordered 10 mags on Thursday and got them Saturday morning! All in good condition, two like new, six with slight wearing of paint, one with a small spot of rust on the inside of the feed lip and follower, and one with a small dent. Dent has no effect on feeding and the rust was easily rubbed away with a little CLP and a rag. All needed a quick wipe down. My only regret is not ordering more."
– Nick from Cincinnati
5.0 5
"I ordered 10 of these, and received them very fast. All 10 showed some degree of minor wear, but that's the key word - MINOR WEAR. Eight of them had just some cosmetic high edge wear from use, the other two had a couple small dents in the magazine body, but nothing that stopped them from functioning just fine. Six required nothing more than a fast wipe down with an oiled cloth, but the other four needed a little more attention and some dust removal. Sure, these aren't the prettiest mint condition magazines for your safe queen, but they're functional, and CHEAP! For the $$ I spent on these 10 magazines, I feel like I stole them."
– Shadowproject
5.0 5
"I shot 250 rounds through my CETME using these mags. I was bump firing, mag dumping, and normal target shooting. These mags out performed the steel CETME mags. Great price. I am ordering another 20 right now!"
– desertprepper
5.0 5
"Got 5 of these, along with 6 of the steel ones. Four of them look brand new, with only one of them showing any signs of use, and that was minimal wear on top. Can't beat the price. Great deal on these."
– JPE
4.0 5
"Cosmetically a little rough. Wear spots through the finish on some, others look new. For this cheap, I can't complain."
– HK guy
5.0 5
"Just bought a CETME and read mags might or might not work. Bought 25 of these and most don't fit. HOWEVER, filing down on the mag lock area on the bottom worked awesome. Mags I got were new in wrapper to used, but very serviceable. Very pleased!"
– jeffj
5.0 5
"Bought 10 of these. Some looked new and unissued and some looked a little dirty, but a good wipe with a little oil and a rag shined them up. Required little modification to fit in my CETME. Very happy."
– GeorgeC
5.0 5
"Bought six of these. Four were H&K, one was Rheinmetall, and one was Norwegian Kongsberg. The worst one was a '75 H&K that was dinged in a few places and worn, but the follower is not obstructed and feeds fine. Another one had light rust on the follower and floor plate, but some oil cleaned it right up. For this price, I feel like I stole them. Buy a bunch before they run out. Now for some mag pouches..."
– rybur
3.0 5
"I ordered 12 of these. Some of the mags were like new, some were a little beat up. All but one were clean enough to use out of the box. Can't beat it for the price, but order enough to compensate for the shipping."
– Shane
5.0 5
"These are used, so order a bunch at these prices. Who knows when they will run out of stock? Had only a few crappy ones out of a few dozen I ordered. Some as nearly new shape, too. You will need to clean these well and add a film of oil to complete them."
– Shooter
5.0 5
"I bought a few hundred of these over the last year or so. These work great in my CETME. I have never had one that would not work in my CETME. Great buy."
– Desertprepper
5.0 5
"This was my third order of these and only one of the 28 was dented, but I repaired it. The rest were perfect. Great product. Will order more."
– Kevin Howard
4.0 5
"I have 50 of these. Fortunately I got them when they were a buck each, but this is still a great deal. I estimate that 90% of them needed some work - nothing mechanical and no parts replacement - just steel wool, WD-40, and elbow grease. Remove the floor plate, spring, and follower and start scrubbing. After cleaning, I ran half of them through two different PTR-91s and had ZERO feed or ejection issues. Get them now and get a bunch!! I gave them four bullets because I had to spend a couple of hours on them, but I'd do it again in a heartbeat."
– RMacSTL
5.0 5
"They show some surface wear, but they work fine and look good. An excellent buy!"
– Roger
5.0 5
"Bought 5 of these. Work like clockwork. No jams, no issues, no problems."
– PTR-91 Guy
5.0 5
"I ordered 5 of these mags and will definitely be ordering more. Two were in brand new condition, three were in used but very good condition. All five function and feed flawlessly (no FTF or loading issues). Definitely a steal at this price!!"
– lagolas35
4.0 5
"Product is in good overall condition, a little rust on 2-3 (Floor plates/springs and even on the SS followers), but the rest were all good; just a little dirty. Cleaned up well. Only one with slight body damage. Finish wear on almost all because they're well over 20-30 years old. Would buy again."
– ZASurvivalist
5.0 5
"Mags came quickly and were in great shape! A couple looked brand new, which is pretty good considering some were almost 50 years old. A couple had surface rust on base plates or followers, but cleaned up quickly. 5 bullets for price and quality!"
– john
5.0 5
"Just received my order of 50 of these magazines today. 11 of them have some minor rust on followers. Easy clean up. Probably a third of them look brand new, the rest are in excellent shape. You can't go wrong at this price."
– Mike
5.0 5
"They do the job very well for an unbeatable price."
– Litljohn
4.0 5
"Ordered 21 HK-G3 magazines and promptly received an invoice and carrier tracking info in my e-mail. Shipment arrived in a few days. Inspection revealed the G3 mags in good condition, several in \"like new\" condition, with various dates, all of them marked (HK).Was hoping to get a few (in wrapping), but that was not the case. Also wish that CTD would allow for an order of (in wrapping) mags. Would be willing to pay the premium. I remember, back in the early '90s, when these mags were selling for upwards of $35 a piece, if you could find them.Bottom line, this is the #1 best deal in magazines and a deciding factor to purchase a PTR-91 over the competitor's offerings."
– RL
5.0 5
"The mags were as I expected - very little wear and a couple were still in the wrapping. Great value for the money."
– J.R.
4.0 5
"First CTD order. I ordered 10 aluminum and 10 steel magazines. The aluminum mags would have been almost Grade 1 if they had not been tossed loosely into the box with the 10 steel magazines, which beat them up in shipping. For what I paid in shipping and handling, I would expect much better packaging of product. I know they are cheap, but that is not an excuse to not package them properly. This may be my last CTD order."
– MisterTheory
5.0 5
"Fearing that these would become super expensive after the election, I ordered 10 of them. Out of the 10, only about two even looked used, but nothing wrong with any of them. The other eight looked brand new. Not a single one had to be modified to fit or work in my CETME, which made my day."
– fishsticksuck
5.0 5
"Received my shipment of mags the other day. Half were still in the plastic, dated 1965 and 1968. The ones that were loose looked in like new condition. Great buy!"
– Mox
4.0 5
"I ordered 20 of these, based on the reviews. I figured half would be damaged or heavily worn. All the mags from the '60s looked like they had never seen a mag well, let alone an \"HK slap\" of the charging handle. A couple that I got from the '80s had definite signs of use, but still nothing heavy. Excellent buy. A number of my floor plates had light surface rust on them, but that was easily remedied with oil. At the time of the purchase and this review, they are now sold out of them."
– shanty
5.0 5
"Ordered 100 of these. All look new, some are in original packaging from 1960s. A few have very minor rust. All are stamped with date of manufacture. No issue loading them with stripper clips."
– squirrel
3.0 5
"I purchased 30 alloy mags and five steel mags. Overall, I was impressed with both. However, the steel ones were slightly better. Out of five, only one had rust, but brake cleaner and elbow grease fixed it right up. I then placed an order of five more steel mags. Better get them while you can. Also, price went up from my last order, so I figure jump now. I don't fault CTD for raising prices, all I ask is that my next order of five all be good quality. The alloy mags, I probably hit a 50/50 percentage of good quality vs. fair quality. Out of the 30 alloys, two were complete junk, dented, rusted bottom plates; about the only thing I could salvage was the spring and the follower. For the price, I cannot complain. Would I pay the price as they stand today? Probably not, unless I was guaranteed Class II quality. I remember the good old days when these went for a couple of bucks. A sign of the times! Thanks, CTD!"
– The end
5.0 5
"I ordered 10 of these and twenty of the steel HK91 mags. The aluminum mags were in virtually brand new condition and were well worth the price; they are practically a steal. The steel mags were obviously used but in good condition. The best bang for the buck is definitely the aluminum mags. God Bless my fellow Americans, and God help our leadership to see the error in their ways."
– Free Republic Partisan
3.0 5
"I bought 10 of these, fully expecting some of them to be junk. Three appeared to be lightly used, with just a few scuff marks. Another three had just a bit of rust on the steel floorplate. Two more have some significant rust on the follower that might polish off. The last two are beat up, dented, rusty, and might go in the trash. Overall, a decent buy at this price"
– Dennis H
5.0 5
"Bought four of these, fearing that the coming ban would limit my ability to get 20 round mags for my CETME. All were new in the package and I have already used these type for my CETME in the past, so I didn't worry about fit."
– lcdaly
5.0 5
"I bought a bunch of these when they were .97 each. Amazing quality as most were in new condition or still in plastic."
– Blexum
5.0 5
"Ordered 10 of these a few days ago and received them today they all appeared to be in new condition still sealed in plastic very pleased"
– Scott
5.0 5
"I ordered twenty of these mags. I had them on my doorstep within five business days. The mags were the high quality you would expect from HK. Half of the mags were brand new still n the original packaging. The other half of the mags I ordered showed very little or no wear at all. I would definitely purchase these mags if your in the market for them."
– Jamey
5.0 5
"I own 3 Century Cetme 308's and these are the exact mags that Century sends with Cetme's. So there isn't anything you have to shave or adjust on your gun or mags for a proper fit. The gun was designed for HK G3 mags which is whats stamped right on these great mags! So if you own a Cetme I would order as many as these as you can afford. I have bought them at 4-5 different prices now but even at this price they are a good deal."
– Slawdog71
1.0 5
"I don't know where all there people receiving new-in-wrap magazines are, but I ordered 14 and not a single one was brand new. All show use, some light and some heavy. Got 5 steel ones and 1 has a big dent while another is rusted and useless. About half and actually HK while the rest are made by other mfg. You get what you pay for; don't expect much."
– MP5A2
5.0 5
"I only odered 5 mags but wish I'd ordered more, they were very good quality. I wish I could get this good of a deal on ammo."
– Dave
4.0 5
"I have a CETME. These mags are the light aluminum as stated. I'm surprised how light they are. These mags work great with one flaw that is kinda annoying. These mags are a tight fit for the cetme if you push on the trigger release you must also pull down the mag. It isn't stuck it just doesn't drop. Not really a big deal unless you like to drop your mags like me instantly. It fits well and works great. GREAT price and I will be ordering more soon."
– jwhall
5.0 5
"I have bought way over $1000 worth of these mags. Yes out of that many I have had 1 come bent and another one came with what looked like paint or something? Now that said I have had over 300 mags come just fine ready to rock and roll! Yes I have had batches come where 40 out of 50 were in original plastic never used. I have also had orders the other way around. CTD never claimed these to be new for that matter they give them a surplus 2 rating."
– Chris S
5.0 5
"I ordered 10 more of these after the first order was delivered. Out of 20 magazines, 5 were slightly used and the rest were wrapped in paper soaked in cosmoline and bagged in plastic. It took awhile to get them cleaned up and ready for use. I have a CETME .308 and I have had zero problems with these magazines."
– 1SG US Army retired
5.0 5
"These are extremely inexpensive (gun shows have them for 5x the cost here) and work great. I use them in my Century Cetme. They have a slightly tight fit, but that isn't an issue. Have bought 8 so far and will buy a lot more."
– Brett N
5.0 5
"These mags showed up still in German factory wrap & preservative bags. Their condition was a perfect 10, showing not a single sign of use in the finish, the follower, or the spring. These mags were stamped \"HK\" & dated 6/63, which makes their literally flawless condition all the more impressive. Will definitely be buying a few more in the future."
– Nick
4.0 5
"Of the three magazines I ordered, two were in near perfect condition, showing only minor wear. The third had some minor rust spots on the follower and interior of the magazine, which should clean off easily. All in all, I am happy with my purchase, especially for the price."
– C
5.0 5
"These magazines were like new and the service was fast and efficient."
– Stg44
5.0 5
"just like new and cheap, does not get any better"
– robert
5.0 5
"CTD is quick and easy to deal with. Products arrive quickly and in promised condition. The price alone should sell this mag, so the fact that it's H&K is just a bonus."
– 22rcrew
5.0 5
"Great magazines for the price. In better condition than other suppliers mags at higher prices. Fast shipping also."
– Jerome Stahl
5.0 5
"Where'd you guys get your time machine? Opened the box and found five brand new magazines with what appear to be date codes from around 1968."
– eeb
5.0 5
"The mags (5 of them) were in good shape. They fit nice and tight in a century arms Cetme lower. One base plate had minimal surface rust. Dissembled and cleaned with 00 Steel wool. Really happy with the price."
– Shovel Guy
5.0 5
"Ordered 10 mags, they all look to be in good shape, all fit in my ptr gi. I will see what happens when I load them..."
– chris
5.0 5
"I've ordered a total of 30 of these mags. The work great in my PTR-91. All of the mags appeared new with a light coat of oil. The springs are in good shape and feed 100%. The price is right and CTD ships fast. Very happy with them."
– John
5.0 5
"I bought 5 surplus mags, the oldest one was date stamped SEP 1965 and the newest was dated JUN 1985. All the mags looked brand new and had no wear or rust (inside or outside). I will buy more of these great mags from CTD."
– bigwig442
5.0 5
"I bought 15 knowing they where surplus and that a few could be junk. Most look like they where issued but never used or even loaded. 3 had wear marks 1 had some filing on the feed lips, and one had a mashed up feed lip unusable. But the broken mag body had brand New looking spring follower and floorplate. All complaints I've read seem like people looking for a gripe. If you complain about having to clean up milsurp parts then you don't understand what your buying."
– jthaggz
5.0 5
"I'll tell you what, everything I have ordered from this site has been great, but these worked out fantastically. I'm not one to write reviews, but hey, these showed up cheap, as advertised, well even better than advertised because of the 20 I got maybe 2 were actually \"used\", and by used I mean they were missing the original packaging. Fair shake for a fair dollar, buy em while you can get em. They shoot as well as the factory mag for my PTR91."
– happy 308 owner
5.0 5
"Excellent surplus mags at a good price ."
– Luke
5.0 5
"I ordered 13 of these\uFFFD 1 was kinda rough, 6 were used with some dents and scratch (made in '73 - '84) and 6 (made between '64 - '67) were BRAND NEW in 50 y/o paper wrapping with some plastic too. I'm a tad worried about the age of the springs, but otherwise I like the conditions of the '60's ones better!!! Though my MOTHER was teenager when they were manufactured!!! LMAO OVER ALL: as everyone says, for the price you any beat it!!! I probably would have gone with 4 stars, but for $3 each they definitely rated 5!!!"
– David
5.0 5
"I purchased ten used aluminum, 1 steel, and 1 brand new PTR-91 magazine; The used aluminum magazines are like new and most from my purchased lot never look to be used. Three out of the ten used were still in factory paper; the three not in paper only needed a wipe down to remove the dust. I broke down one of the three not in factory wrap and it looked flawless; I wiped away the dust from the outer shell and it looks new. The ones I used for practice cycled perfectly through the PTR-91. The steel mag did look used, but it cleaned up nicely meaning I broke it down to check parts and only cleaned the outer shell. The aluminum magazines are cheaper and do look better, but if you want steel the one I purchased functions flawlessly. Zero rust on any of the mags. Forget buying new, get the aluminum for $3.00 per mag. I AM BUYING MORE!"
– 21st NC
5.0 5
"I ordered 12 of these \"used, Grade II\" HK 91, PTR 91, magazines to go with the New PTR 91 I also ordered from CTD. These mags were no different than the brand new mag that came with the rifle!! The only difference there was, was that the new magazine was shiny! There weren't even any marks on the follower indicating that they had never even been loaded!I had an original HK 91 many years ago and put over 20,000 rounds through it with \"USED\" mags just like the NEW \"used\" mags I just got from CTD! no problems then and I'm sure that there will be no problems, now!! These magazines are EXCELLENT! Buy a lot of them!"
– Kim Curtis
5.0 5
"I bought 10 of these, figured I couldn't go wrong for my cheap CETME........Most were excellent condition, a couple were new, only one looked like it had seen a fair amount of use, but was still in great shape with only finish wear"
– Bob I
4.0 5
"I ordered these because of the price. I ordered 5 steel and 10 aluminum. Judging by other reviews I may have just gotten lucky, but all the ones I received are at least as good as I expected for mil-surplus. One of each looks new. All but one is marked HK. None are dented and there is very little rust on any of them. No clunkers. That said, most look as if they could tell stories if only they could talk."
– dutch
5.0 5
"Just received a dozen for my new PTR... some minor wear on the finish, but otherwise fine... good product, great price!"
– Duke Wavewalker
2.0 5
"Most of the mags I ordered looked decent, but I have experienced feed problems with them which had given me 12 bent 7.62 rounds. I'll try PipeRain's technique and see if performance improves."
– John from Houston
5.0 5
"Great deal... out of 14 mags 4 were brand new in the wrapper the rest in great condition 1 was a little scratched, very pleased"
– Rado
5.0 5
"I got 5 of these for my CETME and they fit perfectly. Four looked like they had only been in a gun once. All are in perfect working order and the price is less than half of the next lowest price I have found for magazines in worse shape. Great buy!"
– Dave
5.0 5
"Bought five of these magazines and all were in good shape, four of the five were in superb shape and one had very little rust on the follower. Would gladly buy more of these for my rifle."
– LLufkin
2.0 5
"Given there is a glut of these mags and I paid a relative premium price for 8 of them I expected all of the mags to be in at least good condition.All 8 had significant rust on the follower and springsOne was completely unusable due to large hole and dent in the magazine body.Another had a badly bent floor plate.For anything other than G3s this would be an amazing price and acceptable condition but given that others are selling unissued condition mags for similar price, this wasn't a good deal at all."
– ak2261
5.0 5
"Ordered 30, arrived quickly. A wide spread of vintage ranging from '64 to '88. After wiping them down, 5 had some moderate wear marks from light use, 2 had slight dents, the rest had no apparent wear. 3 followers had some superficial rust which cleaned with some scrubbing with a scotch bright pad, 3-4 springs cleaned up from slight rust. Very pleased. Now all I have to do is figure out how to afford keeping them all filled!"
– Memphis Phil
5.0 5
"Ordered 20 of these aluminum mags out of the 20,7 were new in the rap the remainder were in very good to excellent condition got them on sale when they had 10 packs for a low price. I would certainly recommend purchasing these mags at this price cheaper than dirt came through with excellent products customer service and pricing get them before they're gone"
– Jose D Martinez, Joplin, MO
5.0 5
"Ordered these mags and received one that was not in acceptable condition. Cheaper than Dirt came through and sent a replacement. That kind of customer service retains customers!! Thanks"
– brian schroeder
5.0 5
"Received five of these magazines yesterday and could not be happier. Two of them were still in the plastic and never been used and with a stamp date of 08\68 and 10\64 is even more amazing. Getting ready to submit another order for five more"
– mike leahey, Evans, GA
5.0 5
"I ordered 5 magazines each from CTD and another vendor. The CTD mags were all in individually sealed plastic bags and appear new to me. Great shape at the least. They were shipped in a box which left no room for them to slide around in. In other words, great packaging. The other vendors mags were all thrown together in a large plastic bag and then thrown in a very large shipping envelope. In other words, just awful packaging. All the mags show heavy use going by all the missing paint. CTD was cheaper too."
5.0 5
"I bought 12 of these. 6 were still wrapped in oily paper and tape. The other ones were basically almost knew. I am going to buy more, right after I submit this review."
– Mathew Wagner, Caseyville, IL
4.0 5
"Ordered 10, (5) are new in paper and the other (5) show handling wear. Definitely a good buy."
5.0 5
"If you own a CETME, PTR 91, C308, you would be advised to grab some and more. They are surplus mags, some come with a few dings, some come with minor rust showing *aluminum casing only on these* and some look like they have never been used. Yet, every mag I have purchased has worked, 53 in total, only 4 that needed slight tinkering to feed properly. All in all, these have gone up in price and right now, you should grab a few dozen before they do go up again, or worse... a high capacity ban..."
– Jmcgee, Orlando, FL
5.0 5
"Ordered 5.All in great shape.2 brand new in German paper and sealed in plastic manufacture year 1970.3 other ones as good as new 1984-86 manufacture.Great shipping time at a great price.Just ordered 5 more for Century C-308.Will continue to order more to just keep all my ammo loaded and ready in magazines.$3.00 each no worries.TX.Shooter."
5.0 5
"Ordered 5, thinking if I got 3 good ones and 2 ok ones that's a fair trade. 4 were brand new, not a mark on them. One showed some scratching where it had been inserted into the magwell. Not a spec of rust anywhere, all wrapped sealed in a plastic bag wrapped in oil paper. Very pleased!"
5.0 5
"Once again C.T.D. came through, ordered another 20 of these mags and I could'nt be happier.excellent quality mags for the money, best price on the market.also want to thank the staff at C.T.D. Very professional.waiting for the steel version of this mag to come back in stock so I can order 20 more of them also.thank you C.T.D and staff for great mags and great service."
– Jose Martinez, Webb City, MO
5.0 5
"I ordered 20. 11 of those were still sealed in plastic; the rest were in varying conditions of very good to a little rusty and worn. They all appear functional and should clean up well. I am greatly satisfied."
– Mark, Greater Seattle Area, WA
5.0 5
"Great deal! I bought 6 and all of them were brand new unissued. Still had the protective wrapping on them. Buying some more right now."
– Ryan S, Dallas, TX
5.0 5
"ordered 5 of these mgs. worked great in my ptr. I plan to buy more."
5.0 5
"These magazines are in excellent condition and function properly."
4.0 5
"I ordered 15 mags, of those 15 only 9 are usable. 3 are brand new unissued in H&K wrap,1 wrapped in a corn husk and 6 are tottally unusable. The magazines have crushed sides and bent feed lips. I can't even get the springs out for spare parts. Still a bargain but disappointed with my magazine order."
5.0 5
"Ordered 8 magazines. Received 4 new, still in wrappers, and 3 that had no scuffs, rust or other marks, and 1 that had very slight indications of use. Wow! I was expecting to get 2 or 3 that I could use, with a little work, but these are outstanding! Thanks!"
5.0 5
"I bought 10 and it was a very good buy overall. 6 of the 10 were in sealed bags and wrapped with a piece of VCI paper. Some of the bags were punctured but the mags appeared to be in UNUSED condition! 1 is in rough shape and the other 3 are completely operable with some small rust spots on the follower. Shipping cost almost as much as the purchase, but cost per unit was still a good deal! Took 2 new ones out of the bag and ran 60 rounds through my new PTR 91K G.I with no issue."
– Jokendagger, Camden, DE
5.0 5
"Bought six magazines 1 came brand new other 5 where in great shape will be buying more thank you."