Welcome to Cheaper Than Dirt! Shop 200,000+ deals on firearms, ammunition, gun parts, survival gear and more. All in stock and ready to ship.

Leapers UTG PRO AR-15 Rifle Length Quad Rail System

Leapers UTG
Typically ships the same business day when ordered before 4pm CST.
Add To Wishlist Tell A Friend
Can we ship this to you?
Mil-Spec Picatinny Quad Rail handguard allows for a huge array of accessories and is precision machined for maximum strength. The two piece design replaces your original plastic handguards and locks in place for a secure fit. Rail installs easily without gunsmithing or modification to the barrel.

Precision machined from hard anodized aluminum for superior wear resistance. Four rails with 27 slots per rail includes rubber rail guards for comfort and protection.

Features and Specifications:
Manufacturer Number: MTU003
Precision machined from hard anodized aluminum
Two-piece design
Weight: 20.5 ounces
Length: 12 inches
Width: 2.4 inches
Height: 2.4 inches
Made in the USA

Rifle Length M4 and AR-15 style rifles with standard AR-15 gas tube. The compatibility with any special piston system is not guaranteed.

NOTE: Fits only rifles with triangular handguard cap, will not fit rifles with round handguard cap.

Four Picatinny Rails Each with 27 Continuous Slots

ARR-239 - 12" Rifle length with four rails, 27 slots per rail

ARR-241 - 8.7" Mid-length with four rails, 18 slots per rail 

Item#: ARR-239
Total number of Reviews: 22

Submit a review

5.0 5
"I have an AR15 SP1, original style with triangular forearm. I was glad to find quad rails to fit this style handguard. This rail fits great. Nice and tight. Lots of numbered slots. Lots of handguard covers to cover unused slots. Can't wait to add some accessories and go do some shooting."
5.0 5
"I have the A2 style AR from Colt. This replacement took less than 5 min to install. No special tools needed other than the supplied allen wrench. It has a solid feel. No \"wobble\"."
5.0 5
"I put these on AR15 i built in the 1980's after the original handguards melted. They went on fairly easy with a little gentle tap. Definitely adds noticeable weight if you have a heavy barrel although I find this a good thing others may not. Great appearance and the enlarged holes should provide improved barrel cooling over the plastic aluminum shielded handguards."
5.0 5
"I recently bought my first AR, and wanted to add a tactical rail to it. This one is pretty sweet! Easy install, built in the USA, comes with rail protectors. Can't wait to mount some accessories on this bad boy! Thanks again CTD, and UTG!!!!"
5.0 5
"I purchased this for my dpms classic. It went on super easy without using a tool. I was shocked that it's much more solid than the stock handguard. looks great , all the rail space is super nice, super sturdy, lots of rail covers. Absolutely a perfect product!"
5.0 5
"I bought and installed this unit with ease on my Armalite M15 rifle. It is a high quality piece, installed easy, and mounts very secure. Also it is made in the USA."
5.0 5
"Note to all AR-10 owners- this does NOT fit. I incorrectly assumed that an AR15 and AR10 were close enough for this to work, however I was wrong. It will not fit over the barrel nut to properly secure by the delta ring. I still gave it 5 bullets because I did not see any quality issues with it. It seems very sturdy and on an AR15 would likely perform well. good price for a great piece of hardware, AR15 owners-buy it (AR10 owners, don't)"
5.0 5
"This rail competes with the more expensive brands, and the price is great. If looking for a inexpensive and easy upgrade that holds solid, this is the one to look for. I took off the old handguard and had this new rail installed, with bolts and all in under 5min. No shake or wobble, and the numbers are very visable. It gets five because of the design, durablity, and price."
5.0 5
"I am a mech. eng, and own a machine shop and I was extremely impressed with fit and rock solid feel, to top it off very easy to install, do not hesitate with this one..............Bob"
5.0 5
"I love these rails. They are lightweight, look great, and are well made. I highly recommend them. Plus, the price is right."
5.0 5
"Works great. Looks great. Easy to install. Only down side is I wish I could choose different color rail covers."
5.0 5
"Bought this for my Bushmaster HBAR 20\". Installed it in about five minutes without the use of any special tools. The package come with the rail (obviously), an allen wrench, six nuts for the rail, two extra nuts (just in case I suppose), and more rail guards than you'll need (approximately a dozen).The quality of the product is outstanding! There are clear markings which would make it easy if you remove your accessories or what not. There is no defects in the finish and it was completely flush with my receivers flat top.Some people complain about the weight of this product, and it is a valid point. Personally, I don't carry my rifle everyday and am more than happy to forgo an extra 4-5 ounces of weight in order to save $100-200. If you really are concerned that it might be \"too heavy\", ask my girlfriend... she is small framed and can go through a whole magazine with no effort.Buy this, you wont regret it!"
5.0 5
5.0 5
"Works great. Very solid and looks great. Use LocTite on the screws!"
5.0 5
"This product is great! Went on easily, looks sick, and is solid. It gives a great look to my Bushmaster XM-15 E2S. Now time to accessorize. Everything I buy will be thru CTD. Fast delivery? Umm yes. 3 days."
5.0 5
"This is a very well built rail that is made in the USA for under $100. What's not to love? Precision machined. Excellent and secure fit. You can't go wrong with this rail."
5.0 5
"I ordered this Quad Rail based upon the great reviews. The reviews were right. I own an Armalite M15A2. The rail mounted with a perfect fit. It gave me the ability to mount other gear to my AR. Very nice quality. Also, made in the USA."
5.0 5
"Absolutly awesome accessory! Easy install, superb fit, and feel. It's perfect on my Colt AR-15. Thanks CTD"
5.0 5
"Perfect fit, easy install and nice quality."
4.0 5
"Nobody gets 5 bullets. I don't know if all 20s use the same handguard end cap but these fit perfectly on my Bushmaster with triangle end cap. Bottom first install worked for me. Lined up with notches in barrel nut and pushed down until it bottomed out, guided the tabs from top section under end cap, evenly installed screws a little at a time, done. Thread locking compound is up to you. They give you 20 rail covers. Four more and you could cover all rails. In other words, they give you a lot. Stays tight when installed, and doesn't wobble at all. It will be getting anodized with rest of rifle, so aluminum is perfect."
5.0 5
"Got this in today and installed it on my DPMS Rifle. Went on fast and easy. Fits perfect with the triangle cap and is tight with no wobble. It is well made and looks just as good as forearms costing much more. Love it!!! I would recommend this to anyone!"
4.0 5
"These will fit Bushmaster Dissipator XM15E2S after a little modification. Since the Dissipator model has a mid-installed gas block you will find out quickly that the top part of the gas block hits the underside top of the rail. Use a Dremel tool with a cutting wheel to notch out the underside of the top rail and all will fit perfectly! I used a black Sharpie to cover the bare aluminum on the rail before I installed the rail fully. Thanks for the great product CTD!"