Welcome to Cheaper Than Dirt! Shop 200,000+ deals on firearms, ammunition, gun parts, survival gear and more. All in stock and ready to ship.

Leapers UTG PRO AR-15 Mid-Length Quad Rail System

Leapers UTG
Typically ships the same business day when ordered before 4pm CST.
Add To Wishlist Tell A Friend
Can we ship this to you?
Mil-Spec Picatinny Quad Rail handguard allows for a huge array of accessories and is precision machined for maximum strength. The two piece design replaces your original plastic handguards and locks in place for a secure fit. Rail installs easily without gunsmithing or modification to the barrel.

Precision machined from hard anodized aluminum for superior wear resistance. Four rails with 18 slots per rail includes rubber rail guards for comfort and protection.

Features and Specifications:
Manufacturer Number: MTU007
Precision machined from hard anodized aluminum
Two-piece design
Weight: 15.2 ounces
Length: 8.7 inches
Width: 2.4 inches
Height: 2.4 inches
Made in the USA

Mid-Length M4 and AR-15 style rifles with standard AR-15 gas tube. The compatibility with any special piston system is not guaranteed.

NOTE: Fits only rifles with triangular handguard cap, will not fit rifles with round handguard cap.

Four Picatinny Rails Each with 18 Continuous Slots

ARR-239 - 12" Rifle length with four rails, 27 slots per rail

ARR-241 - 8.7" Mid-length with four rails, 18 slots per rail 

Item#: ARR-241
Total number of Reviews: 16

Submit a review

5.0 5
"Fits my Armalite AR-15 mid length. The stock foregrip was junk so I bought this one to accommodate my bipod. I am not familiar with the other mid length quadrail on this site for 59bucks, but this one worked great for 69. Good machine work, nice # engravings, including made in the USA. Very tight, solid fit on my rifle, I would recommend the nicer removal tool for this application. Fast shipping from CTD. I have a handle and bipod on the bottom rail with room for the plastic guard in between. With iron sights I had consistent tight groupings at 100 yards on a table with a short bipod on this rail. Very nice product."
1.0 5
"THIS WILL NOT FIT TRIANGLE RIFLES, when I ordered this I read carefully the description but when I got it the handguards were clearly rounded and would not fit. I have sent them back."
5.0 5
"Just recvd this product and had it installed on my Armalite within 30 mins. Fits tight and doesn't move at all. Had no problems w/ the triangle foregrip cap as product is made to lock up to it perfectly. I don't know why any one would spend any more than the $70 spent for this item (unless of course if you are switching to freefloat). Item is also sold as UTG part# U416MA as both part#s are stamped on rail."
5.0 5
"Excellent buy! Easy install and solid once tightened. No movement. Highly recommend! great price."
5.0 5
"This is an excellent rail. It is well machined, and has a great price. Mine was for the triangle cap, so it worked well. It holds all accessories very securely."
3.0 5
"Great product but not entirely designed to fit a Bushmaster ORC 308. It fit the triangle front great but I had to do quite a bit of clearencing to get it to fit around the gas tube and barrel nut. Word to the wise, it is a far from direct fit on a Bushmaster but once clearenced it fits like a champ."
3.0 5
"I had to by a grinder to get this thing to fit, It's probably an Armalite AR 10 thing. I did get it on but It would definitely not fit my rifle without grinding down a few areas. It fits well and works well now."
5.0 5
"Bought this to put on a Delton mid length kit I just built. Couldn't be happier. Installed in 5 min when you follow the directions and put the bottom in first and use the rail to push down the delta ring, popped right in. Solid fit, sturdy once screwed together. I would recommend this and would definitely buy it again. Can\uFFFDt go wrong with this product."
4.0 5
"I dropped this on my RRA LAR-15 6.8 SPC in less than 5 min. It fits securely when installed and comes with the rail guards. Great product for the money."
4.0 5
"Just like the NcStar sight I bought, I wasn't expecting this to be spectacular. But I was wrong again. It took a little fitting, like the other guy said it would, but less than two minutes with a flat file fixed it. Rock solid once you screw the two pieces together with the included bolts and Allen wrench. Just use some Loctite and you'll be OK. It feels a little wider than OEM oval hand guards, especially with the rubber covers installed, and it adds some weight to the forend but for the .308 I put it on, that's not a bad thing. I say, for the money, you can't beat this rail system and it's American made (so it says). What's not to like?"
5.0 5
"I have a Palmetto State Armory mid-length upper with the triangular hand guard cap on a DPMS Lower. This rail system was an exact replacement for the stock hand guards. No fitting or gun smithing was needed. The quality of the rail system is made of good quality aluminum and the finish matches my AR's finish. Extremely pleased with this rail system and highly recommend it."
5.0 5
"Awesome. Fits my Rock River Arms LAR-15 perfectly. Nice and tight with no movement. Installed in minutes with no modifications."
5.0 5
"I have a palmetto state armory PA-15 with a triangular cap. Hand guard fit perfectly. Installation is a little tricky, both sections must be slid into delta ring first. Use each section to push down on delta ring and slip into triangular cap. Overall excellent piece of hardware made in the USA."
5.0 5
"This piece fits perfect on my palmetto AR. Several gun shops suggested i just change the front triangle stop to the round or a floating hand rail. This was definitely more cost effective. Had no trouble droping it in, and it lined up perfectly when I screwed it together. Changed the way my ar looked. Very pleased."
5.0 5
"It fits perfectly on my ar with a triangular cap. It is a pritty substantial rail for a great price. perfect for builds on a budget."
5.0 5
"This is an excellent product. The hand guard was easy to install without the use of a delta ring tool, fits very snug with no wiggle room, and looks and functions great. This comes with 16 of the rubberized grip rail covers, enough to completely cover all 4 rails. As for the reviewer who said it doesn't fit rifles with the triangle end plate, this person was either installing it backwards, upside down, or just not inserting it properly. Great build quality, and made in USA."