Welcome to the NEW Cheaper Than Dirt online store! Same great prices and availability, now optimized for your mobile phone!
| Next

AR-15 DPMS Multi Tool 4140 Steel Install Free Float Tubes Barrel Nuts and More

 
DPMS
TL-MW
ARR-070
ARR-070
Ships from Warehouse 1
Typically ships within 1 to 2 business days.
We regret that this item is not available at this time.
Can we ship this to you?
  • DESCRIPTION
  • REVIEWS
AR-15 Multi-tool, Ultimate tool for an AR-15 owner constructed of hardened steel and will do every function you need. Install and disassemble free float tubes, barrel nut, " drive for socket wrench, extension tube, carbine stock, screw drive tip for butt stock and compensator. Made of 4140 steel with phosphate finish. New and very required for AR-15 owners. 
Total number of Reviews: 30

Submit a review

5.0 5
"ive seen plenty of these take alot of abuse and they work excellent! dont buy those other peice of crap multi tools. get this one."
– Rhino
4.0 5
"You would think that a DPMS tool would fit a DPMS flash supressor. Not the case. It is a good thing that I am a machininst. I milled the tool about .020\" thinner on each side in that area. The tool is too thick to fit between the supressor and the supressor washer. Other than that is worked great for installing a FIRSH handguard. The pins for the barrel nut didn't break like some other cheap tools."
– Mike S.
5.0 5
"I opened the box, unwrapped the tool, and within 1 minute the jobs I needed it to do were done. What more can you ask of a tool, besides doing what it is designed to do? Works great, has a nice looking finish to it, just encase you you want to put it on display. :)"
– Colt
4.0 5
"Nice tool, slightly different finish than the picture - like a grey more than black. Heavy duty -it will last forever."
– John
2.0 5
"when i first got the tool i was satisfied with all of the different uses. until i tried getting the buttstock nut off of my bushmaster ar-15. the tool was very cheaply made and the spanner part snapped right off on the first try. besides that i ve only had the tool for 2 months and its already showing rust. \"A\" for effort and \"F-\" for quality. search for a better tool."
– the raven
5.0 5
"What can I say other than perfect! Good finish and works well, has many uses on my Bushmaster and fits all locations was made for."
– Dan
5.0 5
"I figured Id need a multi tool for my new M4 that would help with disassembling and this has it all, I have yet to figure out what all the slots and holes are for but thats all the better."
– Corey
5.0 5
"This tool is very well made, Made changing stocks a breeze with no damage done. If you buy a collapsible stock you will need this tool to do the job right."
– MikeVA
5.0 5
"Tool is a must if you own an AR. Very well made and sturdy to boot. Thanks CTD!"
– Bmac2323
4.0 5
"What a tool! This thing does it all. Hope you don\uFFFDt need to pack it around though. It weighs almost 22 oz. It is an extremely handy tool. Great to have for those AR jobs. The only thing I have an issue w/ is the pin on the stock tool. It is round and it should be square. Good thing I\uFFFDm not scared of a few dents. Over all, great value and good construction. Four bullets for the stock pin."
– stinkingbadger
4.0 5
"So far the tool works very well except for the butt stock nut spanner part of the tool. If you don't have It set just right It could slip off the nut and mar It. That part of the tool could be designed better."
– conrad
5.0 5
"Did what it needed to do. I like that they did not powder coat the pins for the free float tube, so it fit just fine. Be sure to set it into the barrel nut correctly or it will jump out. A good receiver clamp is a must, if its not solidly clamped and steady, the tool will be difficult to use."
– Oldrustydodge
4.0 5
"Very solid tool. Bought it to remove my stock to change out the back plate. I agree that the index point should be square rather than round, but it didnt cause any issue for me. I torqued on it pretty hard to move past the staking on the current back plate."
– Triharder72
5.0 5
"Shipped fast, works well, no complaints. Wish some instructions came so i knew all the uses of this tool. Used it to tighten te castle nut on my collapsable stock. Square fitting might be better but I had zero probs with the round ones. Tightened my Magpul ASAP just fine. very sturdy, think ill keep it in with my gear for a while. Oorah Marines Up!"
– Jeronimo80
5.0 5
"..Dang. This thing is beefier than I ever imagined. I thought this was going to be made of some soft metal.. but I was wrong.This thing looks as if it'll last longer than my rifle OR STOCK!I'd suggest buying one if you own an AR15 or do work on them. MOST definitely worth the money."
– Chase From Oregon
5.0 5
"Like the others said \"Its BEEFY\" and will be around long after your current rifle just to be used again on your others iam sure."
– D-Man
5.0 5
"i think that this item is made from used tanks. i used it to take off my stock and it worked great. great tool for the money."
– ryan Baker
4.0 5
"Cheaperthandirt had this at the lowest price on the net. DPMS makes a great tool for AR owners, and the part for the torque wrench is reassurance. The finish is nice, and the tool is sturdy. Use caution when torquing the nut that holds the buffer tube. The metal of the nut is not as strong as the metal of the tool, and will dent it."
– Mark
5.0 5
"Great AR-15 multi-tool. Very beefy. Only complaint is it looks really pretty with it parkarized finish, but after the first use the pretty finish started chipping off. Think I will sand blast the finish off and paint it flat black."
– DDA4
4.0 5
"sturdy heavy tool. I had to chip a little powder coat off the nut pins to get them to fit in the barrel nut. Solid tool for changing barrels or handguards. fits m4 stocks and can do other stuff. Must have for AR owner."
– wonshot
5.0 5
"Very useful too. Good price"
– sho'nuff
4.0 5
"This is a Good product. It works great. I did have to file down some of the coating in spots to make it fit my compensator nut, but it was simple."
– TNPxRadioactive
1.0 5
"Well I bought this to take off my castle nut and it sucks. It only has one knob for it instead of the 3 knobs. It just ruined my castle nut."
– disapointed
4.0 5
"This is a must for every AR-15 owner. Only complaint is it would really help the new gun owner if instructions came with the tool showing its different uses."
– Dennis
1.0 5
"Bought this to remove my castle nut. It does not work. It only has one pin for the removaland after multiple attempts, my castle nut is now damaged.Don't buy this if you are wanting a tool for your castle nut!!!!!"
– Tom
4.0 5
"This is a good quality tool! This is the same tool that I received with my first DPMS Panther AR-15, lost the first one."
– Bentnutt
5.0 5
"With a few punches and common/misc other tools, and this wrench you can build an AR type rifle from scratch."
– SKUSMC
5.0 5
"I got this tool as part of my \"build an AR15\" project, and it was very handy to have around. It made putting together my weapon that much easier having most every tool I needed in one place."
– SPC Stryker
5.0 5
"One tool you and every AR owner should have! It's worth the price too. Thanks C.T.D!"
– primer
4.0 5
"I haven't used all the features, the barrel and stock wrenches work great, but within a week the finish is FALLING off the tool. I still gave it 4 bullets because even without the finish I'm sure this tool will last longer than my AR."
– Zombieslayer