Apex Forward Set Sear/Trigger Kit For S&W M&P, Polymer

Apex Tactical Specialties
| Tell a Friend
Can we ship this to you?
Typically ships within 1 to 2 business days.
Significantly reduce your S&W M&P Pistol trigger pre-travel and over-travel with the Apex Tactical Specialties' Polymer Forward Set Sear and Trigger Kit. This kit sets the trigger break point farther forward than the factory trigger assembly, producing a feel similar to a single-action fire control system. Customize your trigger pull for your specific needs with easy to install components, including two different springs for variable trigger pull weights.

The Apex Forward Set Sear and Trigger Kit features a solid polymer trigger body with center pivoting safety. The kit comes with two trigger return springs; one designed to produce a four-pound trigger pull, and one to produce a five-and-a-half-pound trigger pull. The kit provides a smooth trigger pull throughout the break and the rounded trigger face provides a comfortable surface for the firing finger.

Set Includes:
Black Polymer Forward Set Trigger
Forward Set Sear
Ultimate Striker Block Kit (Striker Block, Striker Block Spring, Talon Tactical Tool
Forward Set Spring Set (Silver 4 lb Rated Trigger Return Spring, Green 5 lb Rated Trigger Return Spring, Polymer Trigger Slave Pin, Sear Spring, Blue RAM Spring)

Features and Specification:
Lowers Trigger Weight To Approximately 4 lbs (Silver Spring) Or 5 lbs (Green Spring)
Reduces Trigger Pre-Travel And Over-Travel To Produce A Feel Similar To A Single Action Fire Control System
Smooth Trigger Pull All the Way Through To The Break
Overall Trigger Travel Reduction Of Approximately 50% (Similar To Most Factory 1911 Type Pistols)
Reduced Reset
Center-Mounted Pivoting Safety Maintains Factory Safety Values
Easy To Install

Fits: All Smith & Wesson M&P Pistols  (EXCLUDING M&P M2.0) in all centerfire calibers and configurations

Does NOT function in the M&P M2.0, M&P Shield, BodyGuard, 22 or 22 Compact pistols.
Requires the use of the sear housing block designed for the large size sear plunger and spring (current production as of June, 2011).
This particular product usually requires a slight modification to the trigger bar loop for proper function.
This kit REQUIRES the use of the larger 1/8 inch sear spring and plunger set up. If your M&P has a 1/16th inch diameter sear plunger and spring, Apex strongly advises you upgrade to a new style sear housing block before installing this product. All function and reliability testing was done with a 1/8 inch sear plunger and spring, therefore Apex cannot guarantee proper function without the appropriate size sear plunger and spring.

Item#: GNS-0533

Item#: 7-100024AX