Welcome to Cheaper Than Dirt! Shop 200,000+ deals on firearms, ammunition, gun parts, survival gear and more. All in stock and ready to ship.
Previous | Next

Leapers UTG AK-47 Gen 3 Double Rail Mount

 
Leapers UTG
MNT-973
4712274525474
AKS-006
Ships from Warehouse 1
Typically ships the same business day when ordered before 4pm CST.
$21.97
Add To Wishlist Tell A Friend
Can we ship this to you?
  • DESCRIPTION
  • REVIEWS
This Gen 3 mount attaches to side-rail-equipped AK-47, and features two Picatinny mounts for scopes and accessories, imported. Fastens securely with three allen screws to eliminate any wobble. Allows for use with original iron sights on most rifles that have the side rail mounted high enough on the receiver. Side rail measures 3.5" long, 8 slots, STANAG top rail measures 5.25" long, 12 slots.

Features and Specifications:
Manufacturer # MNT-973
Rock Solid AK Double Rail Side Mount
Precision Machined to Fit Most AKs and Variants Machined from Aircraft Grade Aluminum
Double Picatinny Rails for Scope & Versatile Accessory Applications
STANAG Dimension
12 Slots on Top Rail
8 Slots on Side Rail
Optimal Clearance to Fit All Tactical Scopes Right on Top of Bore Centerline 

Item#: AKS-006
Total number of Reviews: 216

Submit a review

5.0 5
"This is a better mount with a lower price than others that I have had experience with. The others did not even have the side mount. Very solid and sturdy, though perhaps a little heavier that some. I have a Bushnell Trophy red dot site on top and a flashlight on the side, and have not had any problems at all. I have removed the mount leaving the red dot site attached between shooting sessions more than once, and it keeps the zero just fine."
5.0 5
"This has to be one of the best mounts on the market. This mount fits on real tight and is very sturdy. Not a bad price either."
5.0 5
"This is an excellant peice of equipment, it fits perfectly on my saiga and holds a 3 x 9 norinco scope. there is no use of the iron sights but still allows for limited access to the receiver cover. An added bonus is that it looks good!"
5.0 5
"I really enjoy using this hardware on my rifle even though it blocks the iron sights on mine... its excusable because with the red dot sight, I have no use for the irons."
5.0 5
"This mount is EXTREMELY solid. I have a red dot sight and a flashlight on it and I could not move it if I tried! I love it and it does not add very much weight at all to the gun...Highly recommend this product!"
5.0 5
"Very Very happy with this mount. I have looked and tried several mounts For My AK-74. None of them were even close to this mount in Value, and useability. I don't even really care how it looks as long as it works, and doesn't get in the way. I have an Aimpoint Comp M2 red dot, and a Beamshot 5W L.E.D. tactical light mounted on the mount and it works great. One of the other points I likes alot is that you can completly field strip the rifle without taking off mount. Quicker the better in my mind! I am on a competition CQB team and we all use this mount now. Only problem is if you don't have a side mount on your rifle this mount won't work. Great item!!!!!"
5.0 5
"This scope mount is by far one of the best on the market for the price today! Why pay over one hundred dollars for an AK scope mount that only allows for the mounting of a Red-Dot or standard scope? This side mount form Leaper's gives you the ability to add an additioanl tactical light or a laser! Not to mention, this scope mount is a great buy and is solid as a rock!I have this installed on my Romanian CUR2 AK74 Sem-Auto Rifle (5.45x39) along with a BSA 40mm Red-Dot Sight and a Tactical Light on the secondary side rail! The mount does not move and is tough as nails! Now it is true that you will lose the ability to use your iron-sights on the AK-47/AK-74 while this mount is installed. But you have a red-dot or standard scope....what's the problem???Great mount and I will highly recommend this mount to any avid AK fan. May it be Airsoft or Real Steel...a highly recommend product!Great Job Leaper's. And as always Thank You CTD!M. Skokauckas"
5.0 5
"I have this on my Century Arms GP WASR-10 and it is solid as a rock! Beats the receiver cover scope mount hands down - and looks great. You don't have to worry about destroying your zero every time you clean your rifle."
5.0 5
"When I first purchased my Saiga 7.62 I knew I was going to get a mount for it. I looked and looked for the \"one\" with the right price. I saw this mount and had never really thought about needing a side rail, but liked the idea. I could have spent twice the price on a single rail mount, or get this one for half the price. I chose this one and I have to say that I am really happy with it overall. The only issues that I can think of is that it is a little heavier than other mounts, but nothing serious and that it attaches with an allen wrench. I would have prefered the simple lever for easy off, but while it is on, it is solid! I have a red dot site on it and have mounted a light on the side, but the shadow from the fore-end and barrel is a little distracting with the light on. Again, overall it cannot be beat for the price and quality!!"
5.0 5
"Top Quality, Rock Solid, Great Price."
5.0 5
"Great side mount mount for my Romanian AK. It was a very tight fit and had to use a rubber mallet to get it on, but it doesn't budgeand holds my zero great. Highly recommend this mount, it holdsmy Red Dot scope & laser securely and dead on targeting. Can also use my iron sights if needed. CTD has the best price and fastdelivery."
4.0 5
"When the box arrived today I was very pleased to see it arrive a day early, good work FEDEX.The mounts, which is made of metal, slid on to the factory mounting rail on my Saiga .223 shorty perfectly. After tightening down the three mounting screws I mounted a 3X9X32 scope without a problem. The mount and scope feel like they are welded to the rifle, great feeling.The only reasons for not giving the unit 5 bullets was the fact that when mounted the iron sights are obscured and it would really be nice to have a quick release instead of the three screws. But I can live with it."
5.0 5
"This side mount fits perfectly on my new RAA Saiga .308. It even comes with it's own allen wrench to mount itself. It's rock solid, and it held zero on the scope attached to it through the 260 rounds I put thru my rifle so far. NICE!As usual, CTD came through with the fastest shipping ever. Thanks CTD!"
5.0 5
"This is the site to goto for all your AK needs, and i will be buying more off of here. As for this site rail, best one i have ever seen. Get it its all you could want for the price. AND makes you AK look bad."
5.0 5
"This mount is awesome!!!! I also used a rubber mallet to get it on my Romanian WASR10. Fits extremely tight and won't budge at all. No problems that I could see or come up with. GREAT!!"
4.0 5
"Got this with the dust cover and scope kit because I had a feeling that one was gonna need this one. This is SOLID. Does need alittle love to get it on but my mallet loved it enough. You can still disassemble it and holds firm. I only wish the rise was alittle higher so I could still use the steel sights. I guess thats why they make lasers."
5.0 5
"I've seen this on other website for almost twice as much. It went on easy and was solid when I tightened it. I was hoping I'd be able to see underneath and use the regular sights if I wanted but it's too low. Although you can remove and replace the receiver cover with the mount still on if you wanted. Other than that I'm very happy with it."
5.0 5
"Got here in the mail in three days, UPS ground worked out great for a change. From the tracking I saw that this piece sat idle very little until it hit my front door. And man, when I saw the package I gotta say I was scared. The bag was jacked the hell up, the box in near tatters! The product inside however... Flawless!The rail slid on purfect. Just when its done slideing, give it a few taps. Mine went on with ease useing my hand. Lucked out. Tightened it down with the screws and allen wrench a little at a time till its so snug, it aint moven for nothen. After it was on, I HAVE to get a scope. Im usen this rifle to tag deer with so I got a long range scope but 2 mounts on it allow for many combos. Looks good, works good and am more than happy with every aspect of this transaction.Just call me a romanian bamby slayer! <ie, the rifle is a sar1>"
5.0 5
"I just received my side mount and I installed it on my WASR-10 and it went on with ease, and is perfectly solid. I love using these reviews to decide it these items will work for me and this one surely does. Well worth the price, my new scope fits it perfectly."
5.0 5
"Ordered this mount for my Saiga 223 received it in 3 day's. slipped righton, didn't have to use no rubber mallet, just pushed it in place and tightend the screws. it did block my iron sights just enough to keep from useing them, guess I'll be installing a laser light on the other rail for close shooting"
3.0 5
"CANNOT still use your iron sights, at least with my GP WASR-10. Mine is also not centered, it is over to right about 1/2 an inch which is annoying. But this is a rock solid platform and won't budge so overall is a good deal."
4.0 5
"mounts solid on my WASR 10/63. top rail is off to the right which is really irritating. iron sights only work when rear sight is adjusted up for long range shooting. I really love that i can still take off the dust cover and clean everything without removing the mount."
4.0 5
"I bought this mount and like everyone says it indeed is rock solid, you cant use your iron sights. I love everything about except the fact that it does seem off to the right about a half inch. With the scope on it is directly in line with the gas tube but does not seem in line with the barrel."
5.0 5
"This is a super sturdy mount I used to put a scope and laser onto my WASR10 with. The dovetail is so tight, you don't really need to tighten the screws down-they are just a safety. The finish is a nice matte black and better than the picture shows. Don't forget to use a rubber mallet or rubber hammer handle to rest against the back of the mount while striking it with another one to prevent marring the aluminum like I did! The alignment on mine was fine, and I am extremely happy with the results."
4.0 5
"well at first i was starting to wonder if i would ever get this, turns out fed-ex delivered it to my neighbors house. so i finally got it and put it on.this mount is extreamly tight,and very well made. other wasr owners are right though, you CANT use youre open sights. it is off to the right a touch, but i think i can get the scope dialed in. anyone thinking on ordering this product i strongly recomend it. trust me, you will not be dissapointed..thanks ctd keep up the good work..........you guys ROCK!!!!!"
5.0 5
"Just perfect for my romanian 10 !!!!"
5.0 5
"Great mount. Very solid. Very easy to install. Adds a nice look to my wasr10 as well"
5.0 5
"This little jem is a great mount in its own right. It fit my Romanian wasr10 extremely well. It drops my scope down a lot farther than one of those top mount scopes. When I buy another \"AK\" I will get this mount again."
5.0 5
"This is perfect for the STG-2000C. It went on in less than five minutes and is solid as a rock! The CTD price was less than half of what others are selling it for. I wish it was a little bit taller so that I could see the iron sights. I was able to put a red dot sight on the side rail. It works, but it\uFFFDs a little bit awkward."
5.0 5
"All i can say is \"sick\". This mount is super sturdy, looks great and works great......."
5.0 5
"I put this on my Saiga AK. Perfect fit. It slid right on with no mallet and tightened down in seconds. Rock solid and I absolutly love it! Highly recomendable!"
5.0 5
"Had the receiver mount and I was never able to keep zero on my hunting scope, reason is that the receiver cover release hole was a little too big plus the screws that came with the mount kept on stripping. This side rail mount is the best I've seen. Very easy to install and the only tool you might need is a rubber or plastic hammer so as not to mar the finish and bend the metal. Just slide the mount on until it is either fully on or tap it a little so that it seats all the way, then tighten down the allen screws with the supplied wrench, and that's it. Mount your scope and go on with it. Best mount I've seen in a while. Thanks CTD. Erik <><"
4.0 5
"just got my mount fits my saiga 7.62 great"
5.0 5
"I just received this mount yesterday and it looks perfect on my WASR-10. I had to tap it on with a hammer but once it was on, it was sturdy. I ordered a nice scope with scope rings and once it gets in I'll write another review."
4.0 5
"I installed this mount on my Saiga 20 gauge and fit perfectly. I have a russian made 'see thru' mount on my other Saiga for which I paid more than twice as much, so this one is a great mount for the money. This mount sits lower than the russian made, but the expensive one is almost impossible to find, so what is out there at twice the money is no longer a see thru anyway. This mount is slightly offset to the right, but the russian one is offset to the left by the same amount. It all adds to about 1/2-inch to the right or the left, which is academic unless you are trying to neuter varmints from 100 yards. I measured the amount of interference betweeb the bottom of the weaver rail and the top of the iron sights and I was able to 'convert' this mount to see thru by putting it on my vise and grinding the bottom of the weaver sight by less than 1/4-inch. It gives you just enough to sight in your scope without firing a shot. At least it puts you on the paper with an additional savings of time and money. All and all the savings was worth it. Somebody needs to tell the maker to make the sight 1/4-inch higher and it would be greatly inproved. On hind sight, if that is done, they will probably double the price. I recommend this mount and only gave it a four because it could be slightly improved."
4.0 5
"Works well on my Saiga 7.62.39, although blocks the iron sights as others have mentioned. Rock solid."
5.0 5
"If the fit,finish and installation was any easier, someone else would of done it. Installed on my WASR10 in about 2 minutes. It took longer to get it out of the box. A very nice mount."
1.0 5
"Please do not buy this product it will not work on saiga rifles it is off center by 1/2 inch too the right you will destroy your scope trying too zero it in.i have ruined a scope already and no one will compensate me for my loss,i guess i learned the hard way,hope no one else does."
5.0 5
"I installed it on a stg2000 .1200 rds no problem great mount"
5.0 5
"Tapped it into place on a wasr10 is sturdy and works great.Woks fine, lasts a long time, drins to the bilges."
5.0 5
"This is the best mount for the AK47. Absolutely locked tight and the correct allen key comes with it. Strong metal, picatinny rails are not fastened, they are part of the unit and is all one piece. you can also remove the dust cover with this in place and do not have to find your sights zero again. NOT FOR SAIGAS. saigas aren't really AK47."
2.0 5
"Extremely tight fit on my Romy RPK! Had to file quite a bit to it make fit. Once installed the top rail was approximately 1/8\" off to the right. Had to use Millett Angle Lock rings to center the scope. Had the same problem on my Romy WASR10 but not as bad. Was able to zero with the windage adjustment on my scope but it took all the left adjustment my scope had to align it. Next time I think I'll try the ProMag mount."
4.0 5
"I installed this on my Wars-10 it fits good but is a little crooked."
4.0 5
"I installed this on my Saiga 7.62x39. It fit with no problem, but it does block the use of iron sights. And no, it didn't ruin my scope when I sighted in my Tasco 3-9x40. The only thing is that the zero drifted if it was bumped. Tried repositioning/tightening the mount but I ended up taking the mount off and sticking with iron sights. My dad has one of these mounts on his Saiga and he likes it a lot. By the way, I shoot 4\" groups at 100 yards with iron sights with my Saiga using Wolf ammo."
4.0 5
"Overall this is a fine scope mount for my Romanian SAR-1 rifle. The fit is flawless, the ability to hold a zero is flawless and it is a really nice product. ALMOST! The three screws that tighten the mount to the side rail, the middle one stripped its threads. Not a huge deal, doesn't affect performance but it bugs me. Also, I beveled the sharp edges off so as to not snag on my clothing. Almost a 5 out of 5 but no cigar!"
4.0 5
"i got this scope rail yesterday it is a good product quite a tight fit thought i mounted mine on my AES-10B, fits good, i put a tlr-2 laser light combo on the side and a eotech 3x magnifier and eotech 557 holographic sight really heavy all together with everything on it it weighs 15 pounds, its all legal to own it has some tool u have to use to release the mag but it ain't much effort at all really"
1.0 5
"Thought I found a deal, turned out I wasted 23 bucks. Put it on, mounted the scope, attempted to bore sight it and it was so far out of alignment I barely even got the laser inside the FOV. Removed it and threw it away. Ordered the promag and fell in love, I was hitting 2\" groups at 100 yards with my Saiga 223. Gave it 1 bullet because thats as low as it would let me rate it!"
5.0 5
"Best price for this mount, right here!A good fit for the Romainian WASR 3. A little tight but OK.Leaves enough room to remove the bolt cover.Accessories mount well too.We placed a green laser on top and a tactical light on the side. All products werepurchased here at CTD.Very pleased with this product.Thanks!"
4.0 5
"put this on a WASR 10 that I have been treating as a kinda project gun...went on well, tight fit put a red dot on it...works fine. Good price, quick shipping, pretty happy overall"
4.0 5
"This is a great peice of equipment. fit the side rail of my WASR-10 perfect, took a little tap to slide it forward at fist, but with a little oil slipes on and off perfect. holds steady, but a little time consuming to tighten the three alan screws. otherwise awesome peice of equipment, sturdy platfom for my red dot sight, hold's zero. great cheap price too, Thanks CTD."
4.0 5
"After doing a little research, I bought two of these for a couple of Romy 74s. The later rifle was tight as stated in previous reviews and I had to \"tap\" it into place. The earliar model, a Cugir produced right around implementation of the crime ban, didn't have enough meat on it. (Thank goodness for the securing screws). I'm sure this is a byproduct of having an original 1N9 rail scope on it when it was purchased. Bottom line, you won't be diappointed with these mounts."
5.0 5
"So far this is the BEST mount I have used on my Arsenal SLR107FR. I was using the MTK-83 previously, and that mount was too high and messed up the balance of my rifle. The UTG 973 is lower, and more naturally positioned, has solid fit and have no problems with maintaining zero as yet. Highly recommended !!"
4.0 5
"A very tight fit,rock sold mount. Using a 4x9 simmons on my wasr 10 I achieved 1 inch groups at 50 yards. I only wish it were 1\\2 inch higher so as to allow use of the iron sights."
5.0 5
"Local versions of this product were $45 or more. When I received it I was surprised how sturdy and thick the metal is. Great buy. Slipped right on."
4.0 5
"Fits my wasr-10 like a glove and looks badass. Even more badass with a scope. Only minor problem is that it's off set to the right a little. Nothing that a little sight adujstment to the left can't fix."
5.0 5
"received my mount two days after ordering and it took all of ten minutes to mount to the my wasr10 and also mounted the leapers red dot sight and i am very pleased with the quality of the sight rail..."
5.0 5
"Out of the bag and ready to sight in five minutes or less. Nice tight fit sliding on stamped AK. Got a pretty reasonable double witness out of the red dot I mounted. Tight, Steady, out of the way and simple. Good in my books."
5.0 5
"Ordered two for both my siagas, a .308 and 12ga. Both went on in seconds, fit precisely and tightened securely."
4.0 5
"Mounted to my wasr10 in less than 5 minutes. Amazingly sturdy. My only disappointment is that contrary to the description the mount is NOT tall enough to use iron sights when installed... but still generally happy with the mount."
5.0 5
"Fit my new 308 Saiga perfectly!! Stayed tight with a large scope on. Awsome for the price!!"
3.0 5
"Fit VERY loose on the side mount, but tightened down well after cranking down the three set screws. As reported it does sit about 1/4\" to the right of bore center - but more annoying is that the whole thing is a bit canted to the left, being it's aluminum I don't trust it to bend to a proper angle without breaking. If it were 1/2\" taller or 1/4\" shorter it would work fine with the factory sights - but as is they are blocked. Seems like if somebody put just a little more R&D into this they would have a very nice product - as is it's just OK."
4.0 5
"rock solid mount easy to install on my RAA Saiga .223 great mount!!!"
5.0 5
"I HAVE A WASR 10 THIS FIT GREAT WORTH THE MONEY"
5.0 5
"Great product fit snuggly on my romanian wasr 10 even before i tightened the screws. Looks great and was quick and easy to install (1 minute). Only complaint was it took 12 days to ship."
1.0 5
"Severe angle cant that cannot be bent forcing you to adjust you scope/viewer/ect. to the extreme right and leaving no room for future adjustments. Also, it is imossible to see your iron sights with this installed, contrary to the claims that are made."
4.0 5
"This sight mount went on flawlessly and locked down tight with little know-how or aptitude required. Everything should be this easy. Like falling off a log.Straight as an arrow, too. And not one of those kitschy Steve Martin arrow, either. A real one. A straight one."
5.0 5
"MOUNTED MOUNT AND INSTALLED SCOPE WAS HITING BULL IN 5 ROUNDS!!! VERY PLEASED THANKS CTD!!"
2.0 5
"When I mounted it on my ak-47, it was crooked. The top rail does not line up to the rifle. It is a very sturdy product and it will not move or fall off of the rifle. It blocks the iron sights. It looks good on the ak, but I need it to work properly as well."
1.0 5
"Fits okay. Scope way low and right, will require major adjustment, not sure how I'm gong to do that yet. At extreme of sight adjustment not evan close."
4.0 5
"Great mount, I put mine on a 1871/84 Mauser. Sets to the left 3/8\".I had to put a ATI bent bolt handle on. I polished the bolt and left It in the white. Looks great. I Can't wait for the weather to lift to go to the range. The one thing I wish it did have would be the locking lever so it would break down quicker, over all I would give it four stars."
5.0 5
"OK I OWN A PSL ROMAK 3 AND THE GUN COMES WITH A STOCK 4 POWER SCOPE AND THAT AIN'T ENOUPH POWER FOR ME. THE GUN SHOOTS THE POWERFUL 7.62X54R THIS ROUND CAN REACH OUT TO ABOUT 800 METERS. SO I BOUGHT THIS SCOPE MOUNT AND I FIGURED THAT WELL IF IT DIDN'T FIT I WOULD PUT ON MY AKM. NOT ONLY DID IT FIT IT FIT PERFECTLY SO I WENT TO MY LOCAL GUN SHOP AND BOUGHT A 15 POWER SCOPE FOR IT. THIS GUN LOOKS SO AWESOME I CAN SHOOT THE EYEBALL OUT OF A TERRORIST AT 800 METERS. THANKS CHEAPER THAN DIRT OH DON'T FORGET PEOPLE IF YOU BUY IT FOR YOURS YOU GOT TO TIGHTIN IT UP OK HAVE FUN SHOOTING"
3.0 5
"This is a sturdy mount that wont move or fall off, but when I put mine on my ak, the top rail was crooked on the rifle. And it does block the iron sights."
5.0 5
"Wow, i cant believe how fast the shipping was i ordered it last night and got it at noon today! As soon as it got here i mounted it with the included allen wrench and screws on my Romak 3 PSL and it fit like a glove! Thanks CheaperThanDirt"
5.0 5
"This is a great addition to my Romanian RPK. it looks great and easy to install. Scope was almost dead on with no adjustment. Thanks CTD again. A++++++++"
5.0 5
"Well its made VERY well and allows you to break down your AK with it on, but DOSE block your iron sights. and mine is Not dead center with my barrel. (the rifles falt..wasar) it is about 2/16 of an inch to the left but i think i can bend it easily. I think its worth the buy."
4.0 5
"This mount is not the crooked mount some people described. I just received mine, 2-20-2009, mounted easily on my Arsenal AK,straight down the barrel. Height is an issue although see thrumounts would allow use of open sights at the 100 yd. setting. About to order one for my dragonov."
4.0 5
"The only reason I give this mount four stars is that I cant see the stock iron sights on my wasr 10. I did need to give the rear of the mount a few taps with a rubber mallet to slide it on the reciever rail the first time. It slides on and off easily now. A bur maybe. Seems like good quality overall."
5.0 5
"I put mine on my saiga AK 7.62X39,looks good and is centered over the barrel."
5.0 5
"Fit perfect on my WASR-10had it on in about 5 secs. does block the irons but I'm scoped...very solid piece...make sure you have side mount"
5.0 5
"I was looking to mount my red dot sight on my romanian and after reading all of the reviews I decided on this one. I think I made a good choice. This is a very solid mount. I tapped it on with a small deadblow in about 5 seconds and it fit nice and tight. The top rides right down the center line of the barrel. When I put my boresight on it was almost perfect. We'll see how it does when I take it out and fine tune it and fire some rounds through it. I think it will hold up well."
5.0 5
"This rail fit on my AK-47 like a glove. I recommend this product for AK owners."
4.0 5
"This mount totally stands up to the many claims of being excellent...I received the mount in 4 days..installed it on my Romanian AK74 (5.45x 39) (SAR-2)..took about 5 minutes...it fit so tight(!) that I had to tap in all the way in with a mallet..it was so tight I could have skipped the 3 tighteing screws..but didnt and installed all 3 screws...I mounted an NC Star 3x9x42 scope that I've had for years...and bought 1 in. Weaver rings at Wal-Mart for $10...it looks great...after mounting..the scope is directly over the center line of the bore...and Im going to the range tomorrow to sight it in ..and have fun...the mount was worth every dime"
5.0 5
"this thing was super easy to install and held my red dot scope securly with no wobble. it was a great addition to my AK i love it great job CTD!!!! u have my vote!"
4.0 5
"So I bought this because I had seen a review saying it fit the Saiga 7.62x39. And it does. I recently bought the Saiga .308 rifle and the side rail mount is exactly the same as any other AK. I really needed to put some sort of rail on my rifle so this was the best and cheapest way to go. To be honest I havent used any side rail mount on an AK before, and on another note; I haven't even fired my new .308 yet. But all in all, right out of the package it looks sturdy, it fit tight (After I screwed it on) and it really does make your Saiga or regular Ol'AK look a bit more tactical as well as actually making it more tactical. So for price plus shipping (And or with Tax) this is worth the money. Give it a shot... No pun intended."
5.0 5
"I put one on my Saiga 7.62X39mm and it fits great. It really opens up a lot of sight options with the dual rails with the ability to use a sight and flashlight or any other combination you can think of. It also gives the gun a new personality. I put a red-dot scope on it and it works great and is very sturdy."
4.0 5
"i ordered and recived one of these in a matter of days. very pleased. i already had a mount somilar to this one the had the \"throw lever\"9made by belarus) instead of the two set screws on the side. i preffer and reccoment the throw lever type because of the re-zero feature. the throw lever one was a bit pricier but it was worth it.overall not a bad product but would prob have to stick with the throw lever."
4.0 5
"I opened it up and threw it on. it was that simple and it locked on tight. holds up my 6x24 power scope like a rock."
5.0 5
"I ordered one of these last Tuesday and CTD got it to me by Weds! Fastest shipping I've never deal with, period.I ordered this for my Saiga 12 and it fits PERFECTLY! Very tight/snug fit. I have no reason to believe that this product will fail on me. I know that the model pictured shows two set screws that secure the mount down, however to model I received actually has three screws (the third screw being in the middle of the two pictured). Do note however that if you order this intending to put it on a S12, you will NOT be able to use the iron sights. The mount simply blocks them out from view - however this shouldn't be an issue as long as you properly maintain whatever optic you have mounted on this thing. Highly recommended for other S12 owners looking for a nice 'budget' optic mount."
5.0 5
"The mount is solid and doesn't move at all once it's on. The first time I had to tap it on with a rubber mallet but that might have been an issue with the mount on my Romanian AK."
3.0 5
"I really like this product. It goes on easy, fits good, and looks good. The only thing is I can't ever find scope rings that fit it."
4.0 5
"The mount went on in about 2 min. I'm very happy with the product. The only problem I have is that my WASR-10 has a stamped reciever and I think over time the side with the mount has warped a little. The mount sits off center of the barrel and I had to try several scopes before I found one with enough windage adjustment. After over 100 rounds, the scope is still dead on(as much as an AK can be). Thank you CTD."
5.0 5
"This is a great mount for my Saiga 223. Mounted my 3x9x40 BSA scope this weekend. Nice!"
5.0 5
"Bought one for my Saiga 7.62x39 and it mounted and works great, holds the scope with no problems. I'm now ordering one for my Saiga 223."
5.0 5
"I would have given this 10 stars but I could only go up to 5. My scope sets dead center of the barrel and the mount slid on my saiga 7.62 with easy. Came with hardware and can be installed or removed in seconds. Once tightend down it did not lose zero after 200 rounds."
5.0 5
"Purchased this mount on a friday. Received it on a tuesday by ground mail. Put it on my romak in bout 15 sec and mounted a red dot scope. Despite other comments it was sturdy as a rock. It was not bent and lined up straight. Very good buy and recommend it far over the top cover mount."
4.0 5
"Very good mount. Fits straight over receiver. Seems very rugged, but no torture test of the product is planned. I plan to use my Arsenal SLR-101S to hunt the thick wooded mountains of East Tennessee where visibility rarely exceeds 100 yards. The mount fit the side rail perfectly and screwed on tightly. The ad indicated that the iron sights would be visible beneath the mount, but they aren't. That is the only reason I didn't give it 5 bullets. Doesn't matter though. If my scope is damaged, the mount can be easily removed and I can return to the iron sights. This same mount sells in local stores for more."
5.0 5
"I received this item last week and within one hour I had it installed on my clone. (Rom. WASR-10) It was a snugg fit which is good, as we don't want anything flopping around, right?? A few taps with the mallet and it was in place... With the correct bases the scope is just the right height for the eye...I ran a 10 round mag. through it and had it sighted in at 100 yds. with 5 rounds...The other 5 were in an 2\" group a hair high...I love this product...."
5.0 5
"Superb mount, couldnt ask for more at this price. Fit was excellent,had to fanagle the centering a little bit. A few soft taps with a smithing hammer cured this though. Other than that it is a great product. Mounted my CQB scope and took it to the range for testing. Zeroing was a breeze, the side rails are handy, but I dont think Ill use them cuz of my quad rails up front. Thanks CTD, Again, for a fine product and fast delivery!"
1.0 5
"Off 1/2 inch to the left on my WASR AK. My sights will adjust but VERY close to NOT working.I'd suggest a differnt mount..not this one."
5.0 5
"Due to the impending threat of zombies lately I decided to start customizing my RomAK. I Purchased this mount not really knowing what to expect. It looked a little cheap from the picture but when i attached it , fit like a ROCK! It lined up perfectly! Attached a Red Dot scope and a Light on the side. Very nice addition! Something else I like. Very easy to detatch if you need to swich to open sights. YOu can NOT see your sights under the mount btw."
5.0 5
"great mounts i got 2. 1 for my saiga 7.62x39 and my saiga 12 they hold great i recommend this mount"
4.0 5
"Received mine today. FAST..!! Installed it on my SAIGA12. No problems. Can not use iron sights, but no problem. Scope zeroed fast ( slugs ) with no issues. Good product CTD..!!"
5.0 5
"I bought this for my aes, fits like a glove. Super easy to install and hold tight. Can't beat the price..."
5.0 5
"Got this item in today....all I can say is AWESOME!! Fit right on my AK-47 with no problem, had to use a rubber hammer to slide it on so yeah very tight fit!! Went out side with my scope mounted on it and ran about 60 rounds nonstop and didn't move an inch!! This is a must have, if you have an AK!! And the price well you can't beat it! THANKS CHEAPERTHANDIRT again, Searcy, Arkansas"
4.0 5
"This is the second AK scope mount I have bought. The first one was from a well known company, cost twice as much and didn't even work half as well as this one does. If you're looking for a mount, don't be fooled by the low price... this is a good mount."
5.0 5
"I bought this mount for a saiga 7.62x39, and it is perfectly straight and rock-solid. Looks pretty damn cool, too. Only problem is that I need a red-dot AND a tac-light now. Great mount, heavy duty construction, very happy, 'nuff said."
5.0 5
"First of all, CTD is tops when it comes to shipping speed and service. Order went in on Tuesday. I got it Wedensday. WOW. It went on my Saiga 7.62x39 easily, it is straight down the center, holds rock solid, and is at a great price. What more can you ask for from a mount?"
5.0 5
"Recently put this on my Saiga .308 with a red dot on top of it. It works perfectly and does what it is made to do."
4.0 5
"Great price, fast shipping, the mount is exactly as advertised. The only negative is that it obscures the iron sight. The mount does reinstall to the same position every time, so maintaining zero is not a major problem. It is not a quick release, so that will take some time. I like this mount."
5.0 5
"I put this on a sagia legion,easy to install, well built, used it with a red dot and it returns to zero. I would buy another if needed on another gun."
5.0 5
"I Mounted this thing on my Arsenal Arms milled receiver AK. With the screws loosened, it slid right into place with no mallet needed. Mine was centered with no left or right deviation. My iron sights are no longer visible, which is allright, as the sights are \"crude\". I zeroed it with 12 rounds and it has stayed on target for 300 rounds. I dropped my rifle once and lost the zero. The mount was still solid, no cracks, no chips. I blame the zero-lost on the scope. I zeroed it again with 6 rounds and it has been on target for 209 rounds since. I can still clean/disassemble the rifle in the same manner....except for putting the receiver cover back on in the last step of assembly. you just need to push in that retaining tab/button juuuust a little to get the clearance needed to properly go into that groove upfront by the gas tube. All in all, this a great mount. Hope this is helpful."
5.0 5
"Got this as a birthday gift, easy to mount on my WASR GP 10. Put a holographic sight on it. My AK has never been this consistently accurate. Installation did require the use of a mallet but looks great. I highly recommend this product."
5.0 5
"Awesome mount! Fits great (with the use of a rubber malet). I bought one for my Saiga 12. I was so pleased with it I bought another for my Romanian AK-47. Great product and fast shipping!!"
5.0 5
"Over all great mount. A little hard to get on and off for the first couple times."
5.0 5
"I bought this mount for my siaga 7.62 that I used for hog hunting. This mount is far superior to any other type of mount for optics compared to the dust cover mounts and top hand rail mounts. I have a red dot on the top rail with a light mounted on the side rail which works together perficty."
5.0 5
"Thanks RAT-FACE,tried a good cleaning with this mount in place had no problem just a few moments extra due to the limited area.So locktite was applied and back to the range I go to recheck my red dot on a Saiga.You can buy this one with confidence if you have a Saiga AK! Ps: never had to use a mallet as others said."
4.0 5
"Fits solid, doesn't slide. Extremely easy and fast to install. I attached my red dot sight to this, works great. i would have liked the rail to be a little longer so I can attach a night vision optic to it as well but for the price, it's great. it does block the iron sights though."
5.0 5
"Nice mount. It fit my SAR-1 like it was made for it. I am ready for the coyote with a red dot on top."
5.0 5
"Came in the mail in 3 days, put it on in 2 minutes. really tight fit and solid like a rock.Put my red dot on there and it looks amazing.Love it!And great price."
5.0 5
"I have a Romanian WASR10, and this mount works perfect for it. As stated in the other reviews, I did have to use a mallet to slide it on the receiver rail. Very sturdy and inline with the barrel. Highly recommended, happy shooting."
5.0 5
"Excellent quality. No mallet needed for install on WASR/10. Just make sure to completely remove retaining screws before installation. Happy hunting!!!"
5.0 5
"Since your using an AK action & the barrel is below the gas tube you'll need to measure the distance between the center of the barrel & the center of the optics (mine is 3.125\") red dot or scope, it doesn't matter.This measurement MUST be put into a ballistics program in gun sight height for an accurate yardage drop. This isn't a sniper rifle but why build errors into your AK. I used Remington shoot (a free download) but there are others out there for you also. Good luck,stay safe & never test your bullet proof vest while wearing it!"
5.0 5
"I had bought several mounts, mainly the type that replace the dust cover with the screws and none of htem fit correctly or if they did, after removal and install a second time they didn't fit. This mount is as tight and sturdy as it gets, I could grab the upper rail and swing it like a club. If you have a side mount on your AK do NOT waste your time with any other mount, by this one, its awesome! Keep in mind you can no longer use your iron sights once this is installed, you will have to remove it in order to reuse the iron sights."
5.0 5
"I just received my mount and once I removed the 3 screws and used a drop of oil, it went on my WASR AK47 with no hesitation. No mallets, hammers or vises. I followed all directions listed and now I have an excellent mount for my optics. Also I have yet to receive anything from CTD that wasn't fairly priced and useful."
5.0 5
"This mount is solid. Easy install everything you need is provided. It was out of the box and installed in about 90 seconds. This is the best mount that CTD offers and at a great price. Gives the gun a meaner tactical look and works flawless."
1.0 5
"Once installed on my WASR it was too far to the right. I thought it would be centered above the barrel but no such luck. As it is it needs to be bent but would cost way more money to do."
5.0 5
"i got this mount to go with the their parts i wanted. like it the mount looks good on my saiga ak."
5.0 5
"Got in just a few days. great price and went on in just a little amount of time and effort. No give, can lift and move it about by holding on to the attachement and doesnt budge a bit. Blocks the iron sights though, but i got it for my holographic sights so that doesnt matter! Thanks cheaper than dirt!"
5.0 5
"I ordered two. I installed one on my Saiga 7.62x39 and the other on the Saiga 12. The 7.62 is using a 4x scope with no issues. The Saiga 12 is using a BSA red dot with no issues either. Both fit snug and do not move. This slides on easy."
5.0 5
"This slid on nice and easy. It is a solid piece. I'm very happy with the purchase."
5.0 5
"I bought this for my EoTech so that I can mount it on my WASR. I originally had my EoTech mounted on the UTG quad rail. However, when I attempted to sight it in, the EoTech stoppped working. After a couple days later, the EoTech decided to turn back on. So I decided to buy this side mount, cause I was not going to take another chance with my EoTech sitting on the quad rail. I took it to the range today and zeroed it in. It works perfect and the install was extremely simple!"
5.0 5
"Fit on my wasr-10 like a glove, I am very happy."
4.0 5
"Same as Adam, mine is off to the left on my Romanian SAR-1. I sighted it in at 50 yards with a red dot sight. It seems good enough for plinking. I will probably try to do some light shimming to get it a little more on center."
5.0 5
"It has a good sturdy construction. It does what it's supposed to do. I rated it 5 bullets. However, on my particular gun (Romanian SAR1), it seems to be angled slightly to the left. On inspection of the mount and rail, I believe it to be the rail of my gun. I think I can make it better with a few adjustments."
5.0 5
"I bought this model. EXCELLENT! Required no gunsmithing (however since I had installed a left-folding stock, I did have to go through a few more steps to install it, no big deal) at all. This mount isn't stamped metal (easy to bend), it's solid. Rock Solid. I also like it because it provides just enough clearance to remove the reciever cover, and dismantle the weapon completely, without having to worry about zeroing in your rifle (trust me, I can do it blindfolded VERY quickly). The side picatinny rails are also great if you want to install a laser/light mount (I already have picatinny rails on 3 sides of my scope, so I didn't utillize that option). If you have a side-mount option, look no further. Fit my Romanian perfectly."
4.0 5
"I was excited for my purchases to come in. I am really big on guns and all I really have to say is that this scope mount is really nice. I mounted it on my WASR- 10/63. It went on tight w/ no problems but the only thing I had wrong with it was that one of the allen screws on it. I was tightening it up and I stripped the screw threads. One more thing when I got my new stock, it couldnt fold onto the left side. Oh well I guess that was my fault to get a side folder stock. Overall this is a nice buy and 4 sure worth the money."
5.0 5
"P.S. The side picatinny works for a great light mount which equals the best Feral Hog hunting asset!!!!"
5.0 5
"I bought this item for my AK and it went on great. It holds tight and I'm still able to remove the dust cover to clean (even though its never needed.) I mounted a 3-9X scope because I am blind. After I mounted the scope, it did not look flush and seemed to veer far to the left. To correct the problem I adjusted the MOA all the way to the right and went to the range. I used 2 full clips before I even found my 2'x4' target at 50 yds. Like my title states the \"look\" will fool ya'. The mount offsets the optic slightly to the left giving an apparearance of being off. Trust the mount and bore sight. My groups went from being all over the place to driving tacks. Around 1\", and Yes Ser' despite what fourms say it can be done with an AK. \"It aint always the bow, but sometimes the indian!\" Happy Shooting and if you want a put an optic on your AK buy now, you wont be disappointed"
5.0 5
"got this a few weeks back slipped right on my WASR 10/63... put my true glow 2x zoom red dot on it and took it the the range... worked grate was shooting 4 inch 30 round groups at 75 feet... impressed even my self and every one at the range... now i am buying one for my shoot'in buddy for his birthday.. thanks CTD"
4.0 5
"It slid on my WASR 10/63 pretty easily. When I mounted my red dot on it, I noticed the mount flexes a little between the side rail and top rail only. The sight stays in place on the top rail but if you hold your rifle, and put even a little pressure on the mount you can see it bend a little. It will go back to where it should be but this might be a problem after awhile. Other than that I'm happy with it."
5.0 5
"It fit perfectly on my WASR-10/63 as well. Came with extra hex screws for direct sight mount as well. It even came with the allen wrench! Perfectly centered, and a breeze to install. Took me longer to tighten down the mount screws than it did to mount it! I absolutely recommend this product to anyone looking for a stable scope/sight base. Also, it does block you iron sights, so be aware."
5.0 5
"Bought one of these for my Saiga .223 and it fit like a glove! I was slightly worried about the integrity of how it attaches. Once I took it for a test run those thoughts were squashed pretty quick. Looks and works great!"
5.0 5
"This took two minutes to put on and screw down. It's been on for almost 3 years. It has room to disassemble and clean your AK without taking it off every time. Nice and tight holds the zero and a great buy!"
5.0 5
"I bought this for my WASR-10 and through a Tru-Glo red dot on top of it. Very easily sighted in scope because this mount is solid and once you have it clamped on, it won't budge. Have put about 500 rounds through the gun, since I put on this mount. The scope is still as accurate as when I sighted it in. If you have a WASR-10, this should be standard equipment, so you can put some sort of quick acquisition scope on it and improve your accuracy."
5.0 5
"I love this mount, I was hesitant to buy because it blocks your iron sights, but I don't regret it. This mount fit perfect on my WASR 10/63 and it hasn't budged since I installed it. Disassembly and assembly of your gun with this mount installed is a breeze and the mount is easy removed if needed. This holds a zero with my red dot perfect. I put 800 rounds through it this weekend and it is still dead on. Thanks CTD for a great product at a great price =)"
4.0 5
"You must have a side rail existing on your AK for this to be installed. I have a Hungarian I bought like 10 years ago, and there is no side rail, so I can't install this mount. Bummer. Other than that, it would have worked great."
4.0 5
"Mounted on a Romanian SAR-1 AK.The Good:\uFFFD Price - $26 = Bargin\uFFFD Mount slides on easy and locks rock solid when screwed down\uFFFD Side picatinny rail (Laser mounted here on mine)\uFFFD Excellent UTG qualityThe Bad:\uFFFD Doesn't quick release\uFFFD Blocks iron sights\uFFFD Interferes with top cover removalFinal Thought - Excellent scope mount for the money. The few short comings are offset by the great value. Overall recommended."
2.0 5
"Good for range kommandos. Otherwise, the metal is not high quality and when the latch worked loose, the rail broke on the end."
5.0 5
"Great rail, impressed with it. Tight and strong. Worked perfect on my AK-47 WASR 10/63. I put the Truglo Red/Green dot on mine. Looks mean and works. Made the whole weapon look better!"
5.0 5
"I have no idea how droppointalpha broke this mount. It is very solid. I think most of the problems stem for improper installation. Tighten the screws evenly until snug and then 1/4 to 1/2 more. That's it. For the cost, it can not be beat. if you own an AK, buy this. You wont regret it."
5.0 5
"A must buy for your AK-47."
5.0 5
"I love this scope mount. It works great on my Dragunov!"
5.0 5
"It holds. Comes with extra parts. Like UTG their stuff always seems just a little heavier than normal but again for the price just do a few more pull up or what not"
5.0 5
"Very nice. It was easy to install. It fit nice and tight."
4.0 5
"It's ok. If your plan is for a scope, it's a must have, but it puts your scope kind of high up so your cheek isn't resting on the stock any more. But, it's easy to take off and put back on and it will hold your zero."
5.0 5
"Fits super tight, you probably wouldn't even need the screws. It sits real low to which is a plus to me. I bought it for hog hunting so the side rail is great for a laser."
4.0 5
"Much better than I was hoping for. It seems sturdy and well made.You can not use iron sights with this mount. We as consumers must remember that you get what you pay for. With that said, it's a great part for not much money."
5.0 5
"A very nice mount. It took about 30 seconds to install and seems extremely sturdy. With a scope you can not rest your cheek on the buttstock when firing, but that does not really matter to me because I don't plan on hitting anything beyond 200 yards, if I did, I'd use the AR. Overall, an outstanding piece of gear and a must have for any AK with the side rail."
5.0 5
"Very solid mount. Put it on my WASR-10 (also bought from CTD). I've had this on for a few months now and the scope is still at my zero. This is highly recomended for the AKS with the side mount. It also sits high enough to where you dont have to remove it while cleaning the gun inside and out."
5.0 5
"This is a nice piece of metal. It fit my WASR 10 very well. It seems well made and very sturdy. This is a great part for the money."
5.0 5
"I purchased two of these, one for my M74 AK74 and the other for my WASR-10/63 AK47. It fit nicely on both rifles and holds well. I do have two cons. #1 - It does not allow for use of the iron sights once installed. #2 - I found a quick release version is also available from UTG. Hopefully CTD will stock those soon. All in all this product does what it is suppose to and I would definitely recommend. As always my order was delivered quickly, Thanks CTD!"
4.0 5
"Arrived sooner than expected, idiot proof installation, suits my red dot just fine very stable, only complaint is that it sits a bit low on my rifle (more the brackets fault than the mount) and interferes with my trigger finger not by much but its still there"
5.0 5
"Arrived in the mail this morning along with a 640 round box of 7.62's. Installation was a lil tight on my WASR-10/63. I thought about filing the bracket on the receiver, but decided that a rubber mallet would do the trick. It work just fine. Idiot proof installation. Now all I need is a scope and a flashlight...I highly recommend this mount to anyone thinking about buying it..."
5.0 5
"Bought this for WASR 10/63. This bad boy installed in seconds with no effort what so ever! Wish I would have bought this brand for my grips now. Also, it has held perfect zero on my reflex sight. It's so easy to take off and install that the fact that it must be removed to clean the gun doesn't matter!"
3.0 5
"Beware. Cannot use iron sight when this mount is on."
5.0 5
"Fits very tight, might need loktite on the screws but havn't shot with it on yet. It's is very sturdy and well made and milled from a solid piece of aluminum so you know its strong. My red dot fit on it nice and tight. Only bad is you can't use the iron sights, but i expected that. Great product and great price, but there is a quick release version available. STOCK IT CTD!!!"
5.0 5
"This works great. I didn't expect much for the price but this thing is solid. Took 20 seconds to install. Stays on tight after several mags. It's never come loose at all. I have not tried taking it off and then reattaching the optic to see if it holds its zero but I'm guessing it does.I thought about getting a dust cover for an optic but I read some pretty bad reviews of those things. The reviews say that dust covers don't re-zero when reattached. I'm very happy with this side scope mount by UTG. I'm getting a second one."
4.0 5
"I have yet to shoot with this on but it seems pretty solid. I was iffy about it when I first got it cause it seemed way loose but tightened up fine. If it holds up like folks say then for the price it's unbeatable."
4.0 5
"This product fit snug on my century arms ak 47. Had to give it a couple taps with a rubber mallet but that's a good thing right? This product was the perfect fit with my mako handguard and truglo scope."
5.0 5
"Mount is simple to install. Three screw lock. I've had this on my WASR 10 for a few months now with a 2X red dot. Zero holds perfect. Sits just high enough so you don't have to remove it to clean. (on a wasr 10). A must have for AK's with the side mount rail."
5.0 5
"perfect fit"
5.0 5
"Fits perfectly on my Saiga AK-74 7.62x39."
3.0 5
"Fit really loose on my WASR, would have so say it was about an 1/8 bigger then my side rail. Had to tighten it down so much it was bowing the bottom off the mount. I ended up cutting the mount in half where it slides on the side mount. After cutting it in half and milling it down about an 1/8 inch it works mint. All and all it does the job."
5.0 5
"Awesome mount, and it showed up in three days. I was so happy I did the truffle shuffle!"
5.0 5
"Exactly as described - nice and sturdy, mounted on my Romanian WASR-10 easily. Solid as a rock. Put on the Leapers SWAT Force Green/Red Dot and I'm ready to rock n roll."
5.0 5
"I have tried a couple of other scope mount systems and this is the best. They are all about the same price but this product comes out of the box on to the rifle with no fuss no muss. I highly recommend it."
5.0 5
"This is a good option for ROMAK 991 users. Also good if you dont like to mess with a dust cover mount system, this may cost more, but the money well spent is well worth it."
4.0 5
"Mount is awesome. Works great. Only reason I put 4 bullets is that product could have the flat parts between the mounts hallowed out. Work look better that way. Kind of looks like brick sitting there on the side of the rifle. Open that space it would give it a cool custom look."
4.0 5
"The only reliable and stable way to mount optics to your ak without interfering with quick disassembly are the side rail mounts. This one is great for the money- no problems after heavy use on a couple different aks"
5.0 5
"had tried a promag,,wouldnt stay on the rifle...got the utg and a very pleased with it..it wouldnt fall off before i tightened it..it lines up good and is very sturdy.."
5.0 5
"Installed this on my WASR10 with little difficulty. I then took it out shooting and like a dummy lit up a couple of magazines without checking the mount which of course came loose.After re-attaching it I sighted in properly tightening the alen nuts after every shot, until it stayed snug. This is a great sight mount, it is solid and holds a zero perfectly. I can still field strip my rifle without removing, but you cannot use your iron sights with this mount installed. Great addition for any AK with side rails."
4.0 5
"A very solid product definitly worth the money.Easy to install slid right on my WASR 10/63 with little effort,some rubber mallet here and there but overall no problem. My only complaint is that once installed (and I tried a couple of times to make sure) it sits off center, not enough that I cant make some corrections on my red dot scope but enough to rate 4 instead of 5. But thanks CTD for quick shipping that arrived ahead of time!!"
5.0 5
"This side scope mount looks pretty BA on the gun. The only thing is that you are not able to see your iron sights with it on. Kinda disapointed becuase CTD said you could, but its still worth the price. Id buy it again."
5.0 5
"Solid construction, fits perfectly on my WASR 10/63, takes only a minute to mount it on the gun. Can't use iron sights unless the rail mount is very high on the weapon, but I don't consider that a negative. Highly recommended for any AK user."
5.0 5
"Awesome!!! installed in 10 seconds, mechanical cover can still be removed from AK. I'm gonna put a little TV on top so I don't miss my favorite shows."
5.0 5
"The top rail sits \uFFFD\" to the left of the gun's center. I'm assuming its to compensate for the high ejection port. Overall I'm happy with the product and the way it looks on my AK. Shoot a magazine, then put a tiny drop of blue lock tight on each screw, then give each one a final torque, and this scope mount will stay on till your ready to take it off. Also you can use open sites with this mount if you have an adjustable rear site and leave your top rail empty."
4.0 5
"Fit perfectly on my WASR 10/63. Would of been 5 bullets but you can't use iron sights. Other than that its pretty awesome."
5.0 5
"Fit perfectly, and very easy to install."
5.0 5
"Bought this for my russian ak. Slid right on and fit great. Mounted a red dot on it and the gun looks very intimidating. Bought one for my son in law, he couldn't believe how good it looks."
4.0 5
"Well made, can't use my rifle sites but easy to take off if need be without zeroing the scope again. Makes me like my saiga 223 even more"
4.0 5
"I just put one of these on my wasr-10. The only thing I don't like is that you cannot use iron sights with it on. (That's why I also go a quick release red dot sight) but it's ok. It is a very sturdy mount and looks like it will hold up to a heavy beating. I recommend that everyone should have one of these if they want to have a good solid mount for any optics."
4.0 5
"Arrived in timely manner. Easy mounting. Not able to use iron sights once mounted. Color matches my saiga perfectly. I had to grind down the corner to get enough clearance so that my Strikefroce collapsible stalk could lock into place when collapsed. Easy fix with a dermal tool. All around a great buy!"
2.0 5
"I put this piece on my WASR-10 with no problems, and put about 400 rounds through the rifle with it on, then while loading it back into it's case I noticed that one of the screws had worked it's way out and is now lost. I had those things tight! The Rifle looks better without it anyway."
5.0 5
"Bought for my Saiga 7.62 only drawback is it blocks the iron sights. other than that, I shot a few hundred rounds and it never came loose. Still feels good and solid after several times of being removed for gun cleaning."
3.0 5
"It looks great, install easy, but it is too close to the dust cover...there is nothing wrong with the piece....its nice but not located in the best place. which is why I'm buying a different one."
5.0 5
"I'm very pleased with this set up. I just bought an EOtech holographic sight and mounted it, and its perfect."
4.0 5
"Put this on my Romanian AK. As far as I can tell, it's held zero for 2 years."
5.0 5
"In my experience, aftermarket rails and uppers fit terribly, and require a lot of gun smithing. This mount slides on and locks down tight. I was hesitant to really tighten it down, but it worked great. I highly recommend it. The only drawback is that it looks very modern compared to my vintage looking rifle. I mounted it on a Romanian AK-74."
5.0 5
"Secured to saiga 12 just fine. Briefly installed, but not used during live fire, this mount fit a Romanian PSL-54c (dragunov) with no problems. I would recommend using different screws which do not have an Allen head. I anticipate after multiple installs Allen head screws on this piece will get stripped eventually. The description needs to include the screw length and thread dimensions. The picture should include the opposite side of the mount. The lower clamp and upper clamp meet at the rear of the mount, which means this mount will always sit squarely at the rearmost position of the AK side rail. I think this would mean it will sit at a solid zero better than a common open sided ak mount."
5.0 5
"I love this mount. It's very easy to install. Once installed, it feels like it was a solid part of the gun!"
5.0 5
"This is an outstanding product. It's light weight, strong and very easy to attach. The three socket head cap screws keep it tightly in place. This is far superior to anything else I've seen on the market. The only down side is that it's made in China."
4.0 5
"Very, very sturdy mount. I am posting this second review because this AK mount DOES NOT sit above the center of the barrel. It is maybe 1/4 inch left of center. Not a deal breaker for a 100 yard rifle, but for a Saiga .308 or Saiga 12, I am picky. This is great for a red dot sight or other zero magnification optics. Worth the money for sure. Other above bore center AK mounts run between 100 and 150 bucks. Come on, UTG! This is a 3rd gen mount. Really guys?!?"
5.0 5
"Got this for my WASR AK. Fits great and does not loosen up with shooting. Attached a UTG CQB scope and it works awesome!"
5.0 5
"Fits WASR 10 AK variant really well. Can't figure out what to put on the side mount yet. I'd like to thank the people for writing reviews that are valuable. This rail, with a good sight and a good head behind the firearm, can make a Colt M4 almost scared. Thank you, CTD. Good night."
3.0 5
"i'm with Tice33rd on this one. 3rd gen. and we still can't get it over center. Guess it was worth the $$, huh. But really, 3rd gen. I think that would imply they changed it to get it over center. Mine may be more than 3/8\" off center."
5.0 5
"Put this on my Saiga AK and it works great. Now to find some decent optics to replace my POS Leapers unit..."
4.0 5
"Mine is a bit off center. too. However, it is not as much as I expected before the purchase. I would say it is close to 3mm off in front and maybe 5mm off near the rear (not as extreme as some of the other reviews). To put it into perspective, I took my red dot (5 MOA) off another rifle of mine and slapped it on the Saiga 12. At about 20 yards, it was maybe 6 inches off with no adjustment. I almost feel it could be gently heated and bent exactly over bore, but don't feel it is necessary with a shotgun. You may want to be a bit more picky about this rail being off bore center if you are using a more precise round like a .308 though."
5.0 5
"Just installed this on my Romanian WASR 10/63. Slid on with ease, fits nice and tight, and is completely centered over the rifle. No slant, no offset, nothing broken, no hammering required for me. No problems at all, installed in 1 minute, no field testing at the range yet, but still definitely gonna recommend this one."
4.0 5
"Fits great on my ak47 nice an tight and my scope fits great on it, nice peice of equipment for the price very happy with it."
4.0 5
"Bought this for my WASR 10-63. Never knew that piece of metal on the left side of the receiver was a slot to put this on. Fit perfectly and snugly to mount my reflex sight on. It is perfectly over center and is solid after 100 rounds. Like others have said, you cannot use your iron sights with this on so that is why I gave it 4 instead of 5. I don't use the iron sights anyway because the rifle hits me in the cheek when I do. I also like that you can disassemble the rifle without taking this rail (and therefore the optics) off. I like this better than the rail attached to the dust cover."
5.0 5
"I got this for my WASR 10-63. Fit perfectly on my rifle with no force necessary. Came with 2 extra screws in case you lose one. Comes with the Allen wrench to install it. Very good deal for the price."
5.0 5
"Good product and price"
5.0 5
"Locks on tight and looks smooth."
5.0 5
"This is the best mount ever for my AK 47 Romanian model. I had to tap it forward with a small piece of wood and a hammer to get it to go all the way into place but its tight and will not come off without tapping it off with a piece of wood again...Lol I wanted a good tight fit and that I have with this product. :-)"
4.0 5
"Good mount for my M&M M10 AK47. Easy to install and lines up perfect! Recommend this mount to everyone. Price is right."
5.0 5
"I use this on my RAS47. Quick and easy installation. Held tight even after shooting 100+ rounds with the slide fire solutions stock."