Cheaper Than Dirt - America's Ultimate Shooting Sports Discounter
Cheaper Than Dirt - Shopping Cart
Cart (0)
$0.00
America's Ultimate Shooting Sports Discounter
TAPCO AK-47 Slot Muzzle Brake 14x1 LH Thread Black Phosphate Finish Stamped TAPCO USA AK0688
Item Number: 2-TINAK0688
Our Low Price: $11.00
Ships From warehouse:

Customer Reviews

Sort by most helpful reviews
 1  
Page 1 of 1 (7 Reviews)
0 of 0 people found the following review helpful
5.0 Rating Best reduced bang for the buck - 8/2/2014
Reviewer: S.T.
Great product. Does what it's advertised to do. CTD has THE BEST PRICE on the internet for this brake. If you are like MANY others on the internet that end up with a loose brake due to the index/timing associated with the lock pin, there are two fixes. Option 1) GRADUALLY file down the threaded end of the brake until the muzzle brake indexes properly on the barrel and locks up with the pin. There are several videos online that show the steps in detail so that you do it correctly. ADVISE anybody new to this to watch videos first. Option 2) Use appropriately sized high temperature o-ring between end of brake and end of barrel thread (between brake and front sight block). This will take up an slack/space and make a nice, solid lock up. This is how mine is mounted and works perfect. Your local auto parts store should have these O-rings readily avail. Cheap fix that only takes a few seconds to do. Crush washers have historically not been successful on AK brakes and are harder to find than O-rings. If you are not sure of what you are doing, seek the advice of a competent individual. Happy shooting!
Was this review helpful to you? 
0 of 0 people found the following review helpful
5.0 Rating Brilliant - 7/1/2014
Reviewer: Tom
The best thing since sliced bread! Reduces felt recoil and muzzle climb considerably compared to the stock slant brake. After reading all the online comparisons I ordered it and was not disappointed.
Was this review helpful to you? 
0 of 0 people found the following review helpful
5.0 Rating Great muzzle brake - 3/3/2014
Reviewer: TPP
Bought this for a CAI 1960 Polish Milled AK, fit perfect. I purchased this after watching a few youtube vids that compared various muzzle brakes side by side. It definitely reduces muzzle rise, but you have to re-sight in your rife after installing (as with any muzzle attachment). Not sure if it makes a difference in flash suppression, but it is definitely good in my book. Another great Tapco product, well worth the money.
Was this review helpful to you? 
0 of 0 people found the following review helpful
5.0 Rating Big Improvement - 7/17/2013
Reviewer: Rick
I was amazed at how much this helps muzzle climb and a 7.62 AK.
Was this review helpful to you? 
0 of 0 people found the following review helpful
5.0 Rating Its not pretty, but it works! - 5/21/2013
Reviewer: Vad
It works as advertised. It pushes the muzzle down during shots, allowing you to get back on target extremely quickly. While we were at the range recently, my brother captured a shot where you can see the gases exploding from the top slots, pushing the barrel down. It does reduce recoil slightly, but the rifle never had that much of a kick into your shoulder in the first place...it has muzzle climb. As far as reducing muzzle flash, I have no idea, and don't care. I didn't buy this to reduce flash - I bought it to reduce muzzle climb between shots to improve accuracy while shooting quickly which is exactly what this does.
Was this review helpful to you? 
0 of 0 people found the following review helpful
5.0 Rating WOOHH!!! - 8/21/2012
Reviewer: Hale4God
This is an awesome muzzle break. You can feel the pressure shoot back, though it feels weird. I put this on my AKMS, and it fit on perfectly and has a lot less recoil. Good product. A must buy for those looking to upgrade from a slant muzzle break.
Was this review helpful to you? 
0 of 0 people found the following review helpful
5.0 Rating Tapco is Awesome - 1/11/2012
Reviewer: Petey
Here is another great Tapco product that works exactly as designed for a great price made right here in the U.S.A. It reduces recoil and muzzle climb. Fits snug on the threads of my WASR-10. For better accuracy, I would suggest a little blue thread locker. It will be tight and take some torque to get it on, but will be worth it. Use an Allen wrench or a small screw driver through the side holes to get in in place.
Was this review helpful to you? 
 1  
Page 1 of 1 (7 Reviews)
 
 
Cheaper Than Dirt!
Cheaper Than Dirt!
Terms of Use | Privacy Policy | © 2014 Copyright, entire contents by CTD, Inc.
Cheaper Than Dirt is a registered trademark of Direct Investments, Ltd. All Rights Reserved
This website is best viewed with Internet Explorer 8.0 and Firefox 15.0 with a screen resolution of 1024 x 768 or higher.
Sign In
New Customer? - Create an Account
Shopping Cart Summary
Cheaper Than Dirt - Close Shopping Cart
Subtotal: