New customer? Click here to login or create an account.  Click to Sign In
Israeli Type 80 Gas Mask Filter 3-Pack Common NATO 40mm Threads New Sealed
Our Low Price:
$15.00

Ships from warehouse: What is this?
Share
Manufacturer: Military 08-990804000
Item: MLT-9102
UPC: 42607560015

NBC FILTER CANISTER TYPE 80

The Type 80 filter canister was developed for the Israel Defense Force (IDF) to provide Protection against all known NBC agents in the form of vapors and aerosols. It is Supplied as an integral part of all Shalon's personal respiratory protection systems. The Type 80 is a robust durable canister intended for military and civil defense use. It is specially designed for comfort and extended use at a minimal physiological load, having low breathing resistance and low weight. Its design assures optimal performance complying with all IDF specifications as well as the performance requirements of the American Army C2 filter canister. The filter is supplied with a standard NATO thread (40 mm x 1/7") and is thus compatible with almost all military and industrial respirators. The Type 80 filters are supplied sealed with leak-proof plastic caps, assuring a shelf life exceeding 15 years.

The production of Type 80 filter canisters is controlled by rigorous quality assurance tests and procedures. Each filter canister is tested in the production line for air flow resistance, aerosol penetration, leakage and workmanship, and cannot leave the factory without passing all these tests. In addition, Shalon's QA laboratories perform gas-life tests (cyanogens chloride, DMMP, chloropicrin, phosgene, HCN) on charcoal samples from each drum and on completed canisters sampled from each production lot.

Weight: 228g Diameter: 106mm Height: 75mm Air flow resistance: 14 flow water gauge at 30lpm Aerosol penetration: >0.01% CK gas life: 100 minutes (at flow of 30lpm and inlet concentration of 2.4mg/lt) DMMP gas life: 250 minutes (at flow of 30lpm and inlet concentration of 3.0mg/lt) Charcoal: ASC 12X30 complying with Mil-C-13724D Filter medium: Glass fibre HEPA media complying with ASME AG-1 Sec. FC-1

Typical performance Characteristics 228 g (w/o caps) 106 mm 75 mm 14 mm water gauge at a flow of 30 lpm <0.01% 100 minutes (at a flow of 30 lpm and inlet concentration of 2.4 mg/lt) 250 minutes (at a flow of 30 lpm and inlet concentration of 3.0 mg/lt) ASC 12x30 complying with Mil-C-13724D Glass fiber HEPA media complying with ASME AG-1 Section FC-1

Gas masks and filters have expiration dates. We sell masks and filters as military collectables only; use of a surplus mask or filter is at your own risk.
Here's What Others Bought When Buying This Item
Average Customer Rating: 4.5 Rating (40 Customer Reviews)  Write a Review!
Page 6 of 8 (40 Reviews)
 ... 6 7 8   Show All Sort:
5.0 Rating Great! - 2/5/2010Israeli Type 80 Gas Mask Filter 3-Pack Common NATO 40mm Threads New Sealed5.0000
Reviewer: boosh
These came in german-worded thick green containers that had to be cut open, they are black and orange inside, and look to be brand new.
5.0 Rating ingenious product - 1/23/2010Israeli Type 80 Gas Mask Filter 3-Pack Common NATO 40mm Threads New Sealed5.0000
Reviewer: primerib01
I cut open the plastic container with a hacksaw. The filter seems to be first class quaiity - but I'm not able to know how old they are - no dates on them. Still, they seem fresh. If you need some of these filter in a hurry, or in the heat of an event, you should cut a few open and perhaps reseal them with duct tape so you can access them quickly. If your stressed and in a crisis cutting them out of the pack would be hazardous. You cannot hurry at this and do it safely. Well worth the money for a three pack.
4.0 Rating just as listed in the catalog - 1/8/2010Israeli Type 80 Gas Mask Filter 3-Pack Common NATO 40mm Threads New Sealed4.0000
Reviewer: D-nice
Sanchez - The NATo filters were received in air tight lilypad looking pods which will and did protect them from impact damage during transportation\shipping. Upon opening one of them it was found to be in excellent condition. You may want to use a saw that comes standard on a leatherman wave to gently cut at the seam of the pod it is the thickest there . you can line up the blade with the seam of the pod to guide the blade so you do not cut your self. The thickness of the plastic is less than 1 sixteenth thick so be careful. Once it has been worn away a bit use a utility knife with as little blade as possible and carefully finish the job. Watch the blade to make sure you dont cut your fingures/dainty-nubbins. Good Times
5.0 Rating great filters - 10/12/2009Israeli Type 80 Gas Mask Filter 3-Pack Common NATO 40mm Threads New Sealed5.0000
Reviewer: brambo
very good filters sealed in a air-tight plastic container that can be easily opened with a serrated knife or hand saw without damaging the canister.
4.0 Rating sealed plastic container - 7/9/2009Israeli Type 80 Gas Mask Filter 3-Pack Common NATO 40mm Threads New Sealed4.0000
Reviewer: bob
After spending 20 minutes trying to figure out how to get the container open with out damaging the filter, I came up with the Idea to use a dremel and the tiny cutting blades that come with most sets. Just take and cut around the seam with the dremel. Just move the case around so the dremel will be on top. the canister will be far enough away from the blade so you won't nick the can. Maybe 45 seconds tops to open one this way. Beats trying a knife or saw and losing a finger.
 
© 2013 Copyright, entire contents by CTD, Inc.
Cheaper Than Dirt! is a registered trademark of Direct Investments, Ltd. All Rights Reserved

This website is best viewed with Internet Explorer 8.0 and FireFox 7.0 with a screen resolution of 1024 x 768 or higher.
Israeli Type 80 Gas Mask Filter 3-Pack Common NATO 40mm Threads New Sealed
Israeli Type 80 Gas Mask Filter 3-Pack Common NATO 40mm Threads New Sealed
x