Category: Magazines » H&K » G3, HK91
Mag H&K G3 7.62x51mm Aluminum 20 Round Original Military
Our Low Price: $2.97

Ships from warehouse: What is this?
Typically ships the same business day when ordered before 4pm CST.
Save Money On Shipping!
Each independent partner warehouse competes for your business. Save on shipping by ordering from one partner warehouse!
Brand: H&K G3
Item: MAG-304
UPC: MAG-304

We obtained a huge lot of H&K Magazines at a great price, and we're passing the savings on to you. These Factory German H&K magazines fit the H&K Model 91 or G-3 .308 rifle. Also fit PTR-91 rifles, and can fit CETME rifles with some minor fitting. 20 round capacity, aluminum, original military; used in good condition. Grade II.

All Military surplus products are used, the condition of the products varies, and the quantities may be limited.
Surplus condition scale:
Grade I – Used in like new to excellent condition.
Grade II – Used in good condition, may show minor use.
Grade III – Used in fair condition, will show normal wear and tear from daily use.

Have Questions?

Use our Live Chat feature for immediate answers.

Bundle These Items

Mag H&K G3 7.62x51mm Aluminum 20 Round Original Military+Mag H&K G3 7.62x51mm Steel 20 Round Military Surplus Made in Germany Used Condition Grade II+Mag ProMag H&K USP .45 ACP 12 Round Blued Steel HK USP Full Size

Here's What Others Bought After Viewing This Item

Here's What Others Viewed After Viewing This Item

Customer Reviews

Most Helpful Customer Reviews

7 of 7 people found the following review helpful
5.0 Rating Great Buy! - 12/20/2006
Reviewer: PipeRain
I have bought scads of these, at $3 a pop, why not? I have run them in two different Century CETME's with no problems. By and large these are great magazines. I would call them "Good to Very Good" condition. Occaisonally there will be a bit of rust on the floorplate or follower, and have seen one or two with bent or dinged bodies. Heres the trick: 1) Order a metric butt-ton of them. I usually order them by 10's or 20's. 2) When you get them, disassemble them all and inspect. If you find a bum part, set the whole mag aside, and save for spares. 3) When The Wife isn't looking, toss all the parts in the dishwasher and run them with just a dab of dishwashing detergent. Put the followers in the silverware holder, or they'll all wind up in the bottom of the washer. Aske me how I know. 4) Once done, get an old towel and make sure all the parts are completely dry, and re-inspect. 5) Put a dab of boat-axle grease on the spring. Not too much, you don't want to collect a bunch of cooters. 6) Put a dab of Tetra Gun Grease on the follower where it rides on the magazine body. Just a tiny dab. 7) Reassemble 8) Re-paint if necessary or desired. 9) Load 'em all up and go have a good afternoon at the range! If you run these in a Century CETME, you may need to file either the locking notch or the seating tabs on the side of the body to get them to seat right, but I haven't had to yet, and I've got probably 80 or 100 of them. All in all they are a steal. Get 'em before either I get them all or they aren't available any more.
Was this review helpful to you? 
2 of 2 people found the following review helpful
5.0 Rating Work great in PTR-91 - 4/1/2007
Reviewer: David M.
I bought 5 of these mags on the first order. I took them apart ,cleaned them with Hoppe's no.9, Sprayed some Silicone on them and put them back together. They worked terrific in my PTR-91. I bought five more and they too came in in pretty good shape. I had seven in total clean up to almost new condition. Two that had minor dents on the front face that did not affect the fuction of the magazines. Only one did not fuction ,but after taking it to work and banging out the dent on the side, it now fuctions as good as all the others. I am going to order a few more as spares should the government want to impose the high capacity magazine band again. All I can say is stock-up now.
Was this review helpful to you? 
2 of 3 people found the following review helpful
2.0 Rating Disappointed - 1/16/2015
Reviewer: ak2261
Given there is a glut of these mags and I paid a relative premium price for 8 of them I expected all of the mags to be in at least good condition. All 8 had significant rust on the follower and springs One was completely unusable due to large hole and dent in the magazine body. Another had a badly bent floor plate. For anything other than G3s this would be an amazing price and acceptable condition but given that others are selling unissued condition mags for similar price, this wasn't a good deal at all.
Was this review helpful to you? 
1 of 4 people found the following review helpful
5.0 Rating H&K Magzine - 12/23/2006
Reviewer: Adrian
Great bargin for you buck. I just recieved my 20-rd clips. They fit great on my H&K G3. There was no sight of rust or damage, they look new. Very pleased with my purchase. Will reccomend to anyone with a Cetme or G3 rifle
Was this review helpful to you? 
1 of 1 people found the following review helpful
5.0 Rating CETME - 5/2/2007
Reviewer: Texan Raven
I have bought about forty of these mags for my Century CETME. They all work just fine. Also, the price cannot be beat, especially as I have seen CETME mags go for anywhere from $16 to $20 both online and at gun shows. Stock up on them.
Was this review helpful to you? 
Terms of Use | Privacy Policy | © 2015 Copyright, entire contents by CTD, Inc.
Cheaper Than Dirt is a registered trademark of Direct Investments, Ltd. All Rights Reserved
This website is best viewed with Internet Explorer 8.0 and Firefox 15.0 with a screen resolution of 1024 x 768 or higher.
Mag H&K G3 7.62x51mm Aluminum 20 Round Original Military
Mag H&K G3 7.62x51mm Aluminum 20 Round Original Military
Shopping Cart Summary
Cheaper Than Dirt - Close Shopping Cart