New customer? Click here to login or create an account.  Click to Sign In
Category:
AR-15 and M16 A2 Cheek Rest Easy Install Fits Full Rifle
ImportantPlease Note
We're sorry, but this product is no longer available.

Please click here to be notified by email if this product becomes available.
Brand: Multiple Manufacturers 1542 AR
Item: ARR-026

Easy to install cheek rest puts your eyes level with your scope and still maintain a proper cheek weld. Comfortable position will increase your accuracy and quick target acquisition. Soft rubber riser is easy on your cheek. It will only fit A2 buttstocks.

Customer Reviews

Most Helpful Customer Reviews

0 of 0 people found the following review helpful
4.0 Rating Check your stock - 11/24/2006
Reviewer: Mechdriver
Though this unit is well made and I consider it to be a good value, I cannot use it on my rifle. The reason is not the fault of the manufacturer or retailer. The reason is because I didn't know that my gun has an A1 stock, which is shorter than the A2 and the tapered dimensions are different. Make sure it is what you need before ordering and I'm sure you will be satisfied.
Was this review helpful to you? 
0 of 0 people found the following review helpful
2.0 Rating Poor Quality - 12/20/2006
Reviewer: Buster
This product is cheaply made. The one I received had molding overflows that had to be trimmed away in order fit into place on the stock, as well as trimming the body in front of the sling in order to allow the sling to pass through the sling eye. Once fitted into place, the side flares tend to stand out from the stock allowing them to snag on thing as you carry the weapon. While the bottom edge is firmly held together by scresws, the top is only held together by the rubber cheek rest, which fits over several half-moon protrusions, which allows the body to seperate at the top. At the same time, these half-moon protrusions tend to bend and break off under light to moderate pressure (one of the rear sets on mine was broken when I received it and the other was bent forward, resting against the next set). This problem could have been eliminated by having solid half-rounds runing the length of each half and screws to hold the top together as does the bottom. Also, the rest itself sits too far back in the stock for comfortable use, and if you are using it with a handle mounted scope, it is too short for firm cheek placement. The only good thing going for it is the price, however, if you only purchase the rest, the minimum shipping charge eats up a lot of the savings, so, you are back at square one. Although I have seen worse, this one is definitely at the bottom of the list and I do not recommend it.
Was this review helpful to you? 
0 of 0 people found the following review helpful
3.0 Rating Good unit with mods! - 11/17/2007
Reviewer: Bourne32262
This cheek piece isn't perfect. However, the particular unit I received fit close enough to my AR15A2 that all I needed to do was get out some half round files and custom shape some of the the more conflicting radiused ends to the stock at the sling lanyard area. The front fit good without mods and the top rear didn't need any attention either. The real weakness is at the bottom rear. There are two screw bosses that have brass inserts that secure the two wrap halves together. They both tighten up without stripping, which was a concern. I can see where one could, however, strip them if you get too anxious about a bad fit, so be careful. The lanyard needs a bit more clearance than provided by the opening so you'll have to file some material away. The cheek riser itself is good construction and should privide good service. The charging handle clears at full stroke with no problem. I have not found any other cheek piece like the nice Colt Delta H-Bar has so this unit saved me alot of custom fabrication time at a decent price. If you don't mind filing a bit, this unit works.
Was this review helpful to you? 
0 of 0 people found the following review helpful
4.0 Rating Good Deal - 12/22/2007
Reviewer: Jim
I put a new scope on my AR-15/A3 and needed a good cheek rest. This cheek rest fit the bill perfectly. It took about 2 minutes to install and it fit my stock perfect with no modification. First time I placed my cheek on the rest I got a perfect sight picture. I am very pleased with this item and would recommend this product to anyone. I have not yet had a chance to try it at the range or in the field, but I am confident that it will perform well.
Was this review helpful to you? 
0 of 0 people found the following review helpful
1.0 Rating BAD CHEEK REST - 4/2/2008
Reviewer: LOUIS
THIS IS POORLY MADE I ORDERED I AND IT CAME BROKEN, IT WAS REPLACED AND THE REPLACE ONE CAME OK BUT THE FIRST TIME TOOK MY GUN OUT TO SHOOT AT THE RANGE THE CHEEK REST FELL APART SO GUESS WHAT DONT BUY THIS CHEEK REST ,IT IS MADE POORLY.ITS BEEN MORE THEN 30 DAYS SO I CANT RETURN IT.
Was this review helpful to you? 
 
 
© 2014 Copyright, entire contents by CTD, Inc.
Cheaper Than Dirt! is a registered trademark of Direct Investments, Ltd. All Rights Reserved

This website is best viewed with Internet Explorer 8.0 and FireFox 15.0 with a screen resolution of 1024 x 768 or higher.
AR-15 and M16  A2 Cheek Rest Easy Install Fits Full Rifle
AR-15 and M16 A2 Cheek Rest Easy Install Fits Full Rifle
x