Brand: Lee Precision 90390
Lee Precision Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are clamped together then lathe-bored for unmatched roundness and size control. Weights given are Lee's weights with suggested alloy; actual weight may vary due to the alloy mixture used.
A solid bullet that loads easily even after many firings because of its unique cleaning action. Will not tumble. A perfect hunting bullet with heavy loads. Easy to cast. Shoots accurately even in greatly oversize barrels.
Rifling Engraved At Loading (REAL): The driving bands are large enough to adequately engage the rifling when pushed into the muzzle, and thin enough to withstand maximum charges without stripping or gas cutting.
Unique Cleaning Action: You can shoot all day without cleaning your rifle between shots! When inserted into the muzzle, tiny scraping edges are swagged forward on each driving band. These perfect fitting scrapers remove the fouling from the previous shot.
Easier, Faster to Load: It's easy to load straight and true, easier and faster than a round ball with patch. Easily stabilized with very light charges, the REAL bullet also retains accuracy with maximum loads. Each band is generously tapered to the rear with an angle close to that of a lathe center, so as to center the bullet against the rifle bands. When pushed in, the bullet automatically centers in the bore.
More Accurate: The bevel base of the REAL bullet contributes to greater accuracy. When the bullet exits the bore, the gas escapes equally around the perimeter of the base. The uniform bevel is resistant to nicks that would permit gas to escape prematurely and cause a jet effect on one side of the bullet.
Specifications and Features:
Produces Two .45 Caliber Lee REAL Bullets
Aluminum mold block
Lathe bored mold cavities
.001 or less roundness
Features tangential cut off which eliminates the nib at the sprue cut off