Cheaper Than Dirt - America's Ultimate Shooting Sports Discounter
Cheaper Than Dirt - Shopping Cart
Cart (0)
$0.00
America's Ultimate Shooting Sports Discounter
Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns
Our Low Price: $21.69

Ships from warehouse: What is this?
Typically ships the same business day when ordered before 12pm CST
More Buying Choices
Warehousefor $22.93Show Me
Warehousefor $29.40Show Me
Warehousefor $29.40Show Me
Warehousefor $20.59Show Me
Warehousefor $20.60Show Me
Warehousefor $29.40Show Me
Warehousefor $29.40Show Me
Warehousefor $29.40Show Me
Share
Brand: Laserlyte ADP-TRIR-140
Item: 2-LLADPTRIR140
UPC: 689706209278

Set up your tactical or home defense shotgun for maximum versatility and low light performance with this new Tri-Rail Mounting System. Lightweight and durable, this system positions three Picatinny rails at the front end of the shotgun where flashlights and/or lasers are best located. Easily mounted on the magazine tube of most popular 12-gauge pump shotguns, the Tri-Rail takes up under 1.5 inches of space ahead of the forearm. Made of tough aircraft grade 6061 T6 aluminum with a matte black anodized finish, the Tri-Rail attaches in minutes with two machine screws.

Adds 1 ½" of tactical rail to your 12 gauge shotgun
Clamps in place on your magazine tube.
Universal fit
Compatible with most 12 gauge magazine tubes.

Weight: 0.8 ounces, rail length is 1.5", inside diameter is 1".

Customer Reviews

Most Helpful Customer Reviews

1 of 1 people found the following review helpful
4.0 Rating Great Product - 2/22/2012
Reviewer: Rafterman
Very well made, easy to install, and it went together nicely. I recommend it.
Was this review helpful to you? 
1 of 1 people found the following review helpful
4.0 Rating Just Installed - 8/16/2012
Reviewer: Daniel Byars
I own a Mossberg 500A with an 18.5 inch barrel, collapsible stock, and factory heat shield. I had read the previous reviews, detailing difficulties installing this accessory on my particular shotgun. This is the five round tube, not the seven round, full length tube! I just finished the installation and I have the following to say: You MUST bend the heat shield flange inward (tighter) to allows the flange to fit inside the rail. You WILL have a difficult time aligning the rail holes and the heat shield flange holes with the factory plastic spacer block holes. I wrapped electrical tape 2 times around the upper portion of the tube, exactly where the rail sits. This created a snug fit before I pushed the heat shield flange inside the rail. NOTE: The factory hex head screws and the provided screws ARE NOT LONG ENOUGH!! You will strip the aluminum threads if you attempt to tighten or over tighten. I used a 1-1/4 inch, 1/32 thread pitch servo screw, which allowed me to use the factory nut that the heat shield came with. All said and done, with a TLR-1, a FANTASTIC set up! Good luck.
Was this review helpful to you? 
1 of 1 people found the following review helpful
2.0 Rating Meh - 9/14/2012
Reviewer: Jacob
On Remington 870 with 18.5" barrel and 2 round magazine extension. Well, it went on easily, didn't scratch anything, screwed in fine, and stayed attached firmly. The problem I had with it was that, because I have to remove it to take the gun apart, the hex bolts stripped very fast - after only about 4-5 cleanings, there was already a problem. I ended up not being able to remove one of the screws and had to cut through it to get the rails off my gun. If I could replace the screws, I would still be using it, but they are fairly specific machine screws that I haven't been able to find a matching part for.
Was this review helpful to you? 
1 of 1 people found the following review helpful
5.0 Rating Sturdy Steel, finally - 10/26/2012
Reviewer: Tri Rail
This is a nice piece. It mounted very well at the end of the shell tube. The laser light I mounted to it kinda sucks, but I do like the tri rail. Get one.
Was this review helpful to you? 
1 of 1 people found the following review helpful
5.0 Rating single-bi-tri rail - 3/6/2013
Reviewer: Moss 5 pursuader
Nice little addition to my 12 gauge. I took into account to be easy on tightening the screws. One thing I did that helped was cutting small strips of an old ruger sticker and paste them on the inside of the rail. This really helped in fitting it tight and keep it from moving and scratching the mag tube. Many variations of ways to mounnt lights and lazers. A must buy!
Was this review helpful to you? 
 
 
Cheaper Than Dirt!
Cheaper Than Dirt!
Terms of Use | Privacy Policy | © 2014 Copyright, entire contents by CTD, Inc.
Cheaper Than Dirt is a registered trademark of Direct Investments, Ltd. All Rights Reserved
This website is best viewed with Internet Explorer 8.0 and Firefox 15.0 with a screen resolution of 1024 x 768 or higher.
Laserlyte Shotgun Tri-Rail Mount 1.5 Rail Fits Most 12 Gauge Shotguns
Laserlyte Shotgun Tri-Rail Mount 1.5 Rail Fits Most 12 Gauge Shotguns
x
Sign In
New Customer? - Create an Account
Shopping Cart Summary
Cheaper Than Dirt - Close Shopping Cart
Subtotal: