Most Helpful Customer Reviews
|0 of 0 people found the following review helpful|
||takes a bit of work - 2/13/2012|
|I purchased this holster despite a few bad reviews. The bad reviews all talked about how tight the holster was. When I got it I slid my sig mosquito into it and it was very tight just like the reviews said. I loosened the tension almost all the way up and it was still too tight on the slide and hardly any tension on the trigger guard.
I decided to fix the problem and it seems to be a great fix. I took a hacksaw blade and slid it into the holster and slowly cut the three rivets that hold the two halves together. After popping out the rivets I put in my own small black machine screw with a small neoprene washer between the two halves. I used a small black nut on the other side and tightened them till tight. Also I replaced the tension machine screw with a bolt that was exactly the same just a touch longer.
The hardware only cost my like 3 or 4 dollars at the hardware store. 15 minute fix and I have a great holster that I do not have to worry about damaging my gun.
Fobus needs to fix the sizing on this holster. Other than that its great|