You are not logged in. Log In |  Register New Search
  Previous Topic    Next Topic  
advanced

Posted:  10/29/2009 9:34 AM #19711
CTD Blogger


Joined: 7/14/2009
Posts: 10625
Last Post: 7/22/2014
Subject: Unitized Scope Mount System from DNZProducts

Quite a few of our hunter friends have praised the DNZ Products (aka DedNutz) scope mounting system. This is a unitized one-piece base AND ring system. Because the rings are integral with the scope base, you won’t encounter any potential misalignment between the front and rear base. You also eliminate the need to keep the rings torqued securely to a separate base. The rigid DNZ design has no moveable parts between the firearm and the scope.

Made of milled, anodized aluminum, the one-piece DNZ scope mounting system is one-third the weight of most other one-piece base and ring mounts and it can’t rust. For target rifles with a Weaver or Picatinny-style base, we still advocate the use of Burris Signature Zee rings. However, if you are looking for a sturdy, more rugged scope-mounting set-up, the DNZ system fits the bill. It would be a good choice for a walk-around varminter or a deer rifle. Because the front and rear rings are precision CNC-machined, DNZ claims that it’s not necessary to lap the rings. We still recommend you inspect the ring edges and lightly debur as necessary. If you choose to lap the rings, do it gently as the inside should be very concentric already and you don’t want to grind through the anodizing.

One DNZ scope mount user, writing on huntingnet.com, comments: “I bought a pair of DedNutz for a Browning A-Bolt and a pair of Talley Lightweights for the same gun. I have to tell you that I think these DedNutz rings are some of the most rugged rings I have seen and yet are very lightweight. The [DedNutz] have a superior finish to the Talley lightweights … and they are better machined. I put a lapping bar on both and the Talleys needed it but not the DNs.”



Jump to:
 
  Previous Topic    Next Topic  

CheaperThanDirtForums