You are not logged in. Log In |  Register New Search
  Previous Topic    Next Topic  
advanced

Posted:  10/10/2012 11:01 AM #34544
BlueWolverine


Joined: 9/24/2012
Posts: 7
Last Post: 10/15/2012
Subject: Spent casing stuck in Chamber
Help... I have a S&W M&P Sporter AR15, almost new. I took it out to do some shooting with my sons and I had reloaded all my mags with Tulammo, because who wants to plink with the expensive stuff? The problem is this, After say 200 rounds or so with no problem, a spent casing remains in the chamber. I looked at the removal tool offered here at CTD, but in my case the rear of the casing is still attached. I feel like the heat of the caused the lacquer finish on the steel casing to act like a weld, I really am not sure, I just need to know how to remove it without causing damage... Thank you for your assistance.


Posted:  10/10/2012 11:28 AM #34545
Warblade


Joined: 1/19/2012
Posts: 115
Last Post: 12/18/2012
This seems to be a problem with Tulammo. In everything I have seen or read you are right that the lacquer melts from the heat of shooting then cools down in the chamber. Find a previous entry on here from gundog94 I believe he is a gunsmith and send him a private message and he may be able to help.

Posted:  10/10/2012 1:15 PM #34546
gundog94


Joined: 4/15/2008
Posts: 312
Last Post: 4/14/2014
Wolverine, if you haven't already done so, try tapping the stuck case out with a one piece cleaning rod. It won't hurt the gun even if you tap on the end of the rod with a plastic mallet. In most cases, this will free the stuck case.
"Those who hammer their guns into plows will plow for those who do not."

CTD Moderator


Posted:  10/10/2012 4:24 PM #34552
ancona77


Joined: 6/14/2012
Posts: 250
Last Post: 9/18/2013
Yes what gun dog said. I have had this same issue in my bushmaster that I warned about in another post. I had to take the upper off and knock it out with a cleaning rod. I had to use a good amount of force to get mine out. Stay away from coated casings.
HAPPINESS IS A WELL FED BELT FED!

Posted:  10/15/2012 9:43 AM #34601
BlueWolverine


Joined: 9/24/2012
Posts: 7
Last Post: 10/15/2012
Thank you all so much, this worked perfectly, and the weapon is cleaned, oiled, wirth 10 loaded mags (federal ammunition)...


Jump to:
 
  Previous Topic    Next Topic  

CheaperThanDirtForums