You are not logged in. Log In |  Register New Search
  Previous Topic    Next Topic  
advanced

Posted:  6/9/2014 9:24 AM #41995
CTD Blogger


Joined: 7/14/2009
Posts: 10828
Last Post: 8/20/2014
Subject: Federal Aims at Muzzleloaders’ Accuracy with New Bullet
(gundigest.com) By: Elwood Shelton | Muzzleloaders have come a long way from the days of Daniel Boone and Davy Crockett. Perhaps the only similarity between today’s firearms and those used by the famous woodsmen is how they are loaded. From muzzleloaders’ ignition systems to the powder they burn, the guns are light years away from their predecessors. Federal Premium aims to take another element of the muzzleloader a step further from its Kentucky and Hawken Rifle roots – its ammunition. What Federal has attempted to do with its Trophy Copper Muzzleloader Bullet is deliver the performance of a sabot bullet, with the convenience of a belted round. The company believes it has found the middle ground with the B.O.R. (Bullet Obturating Ramp) Lock MZ System.

 

The heart of the B.O.R. Lock MZ System is a polymer cup that is permanently attached to the bullet’s base. Its function is similar to a sabot, creating a seal in the bore and engaging the rifling when the muzzleloader is fired.

The system functions by the force of ignition pushing the cup forward onto raised bands, called obturating ramps, along the bullet’s shank, expanding its diameter. The system, according to Federal, helps provide 200-yard accuracy, but it does more than keep a muzzleloader on target.

The B.O.R. Lock also aids shooters in one of the more challenging aspects of a muzzleloader – the follow-up shot. The system is able to offer quick reloading of the firearm in two ways.

Federal Trophy Copper Muzzleloader Bullet

Federal Trophy Copper Muzzleloader Bullet parts.

First, the Trophy Copper Muzzleloader Bullet and the B.O.R. Lock cup have a slightly smaller diameter than the a muzzleloader’s bore, making it easier to load in the first place. Second, the cup has a hard, fiber-reinforced polymer ring at its base that functions as a fouling scrubber. This decreases the need to clean between shots and makes it easy to seat the bullet at the exact same depth for every shot.

Similar to other projectiles in Trophy Copper line, the copper-alloy bullet features a polymer tip, with a deep, hollow cavity and skiving that allows for consistent, devastating expansion. The high ballistic coefficient also flattens trajectories and minimizes wind drift.

To be sure, Federal Trophy Copper Muzzleloader Bullet promises a mouthful – in loading ease alone. And if the bullets deliver it could mark yet another moment when the muzzleloader further broke from its forebears.



Posted:  6/9/2014 5:02 PM #42013
horselips


Joined: 5/2/2012
Posts: 2062
Last Post: 8/19/2014
I don't get it. You play with black powder weapons to experience, and connect with those times. As they were. Trying to high-tech black powder is like putting jet engines on a sail boat. You buy a sailboat to sail - to raise and lower the sheets, to tack, to close haul and all that - not to motor about. I own a car without rain-sensing wipers, adaptive cruise control, lane change warning, blind spot warning, parking cameras, and all that nonsense because I want to be the DRIVER, not a passenger in my own damn vehicle. I'd be much happier flying a low-tech biplane or Piper Cub than I would in a computer-controlled Lear Jet. Black powder should be the same ideology.

Jump to:
 
  Previous Topic    Next Topic  

CheaperThanDirtForums