It is too bulky for front pocket carry. May be ok for cargo pockets. It is larger than the Kel-Tec in the zipper pouch it comes with.

this is not a bad product for the price. the holster holds my wife's taurus pt-111 in my back pocket fairly well. the rubber ribs on the outside of the pouch keep the holster in the rear pocket of my bdu-s very well. unfortunately, my duty belt kept getting in the way of my draw (too much gear on my belt). so, bottom line; would i buy this again? yup, absolutely! the holster is a tad bit pricey, but what the alternative? paying for a more expensive holster? naw, get real. that's why we all shop at CTD.

If you are buying this holster to be sneaky...then don't. This a very large, padded beast of a wallet holster. I still gave it four stars because that's what I bought it for. Its well made, not slip, padded and will serve a couple of very specific purposes for me. It will fit my Kel Tec with the laser added to it, it will fit nicely in a cargo pocket and not bounce around too much, and lastly its perfect for inside my wife's purse of an over night bag. Easy storage with equally easy access.

I carried my Guardian .380 every day for 18 months in this holster. Now I have carried my LCP in it for the last 6 months and now LCP with CT Laser. It is a fantastic right hand pocket holster. Yes I said right hand, some think it is left hand but its made so flap hides outline of gun. I am going to order another one just in case they decide to discontinue it.

CTD did it again. great price great product. i cant even tell that i have my p32 in my pocket and i even have the armalaser mounted on it

Kel-Tec + Arma-Laser + Ace Case = One Great Combination. I've carried this combination for over 6 months, and it works very well for me. I am pleased! The Ace Case Pocket Holster seems to be designed to accept my Kel-Tec 32 with its Arma-Laser aiming device. I'm sure this holster also works well with the Kel-Tec and Ruger .380's.

This is a good product and it stays in place in the pocket due to the rubber on the exterior. The only problem i have is that it is starting to conform to the gun and is actually pretty visible. Not so bad in baggier shorts and pants, but in the work pants its starting to become questionable.

Well made but very thick.Prints very bad in cargo shorts, don't even think about jeans. Looks like you have about five grand stuffed in your pocket, so much for concealed carry.

Fits my LCP great, covers trigger guard. Holster stays in pocket and is a good value, though it went up nearly $3 since early July? In looser jeans\pockets it will mostly disappear, in tighter fit jeans it will just look like a large wallet.

I got this for my LCP but it is too bulky.I tried it with 4 different pair of shorts and it leaves a very big bulge in your pocket.Dress slacks does not work either,It does work in my back pocket pretty good but I don't like carrying in my back pocket.I will probley only use this in a jacket pocket.If they make this holster thiner it would be a great holster.

I carry a Ruger LCP and typically wear Levi's to work, this holster does leave a somewhat large imprint. Some say a wallet-type imprint. Well, I also carry a wallet in my back pocket. Having a "wallet" buldge in my front pocket and my rear pocket fools no one, in my opinion. But it works !! When I wear my Workmans Utilikilt, it fits in the side cargo pocket perfectly !! So now when I'm wearing my kilt, I have this holster in the cargo pocket !

Not overly impressed. Looks extremely bulky in front pocket. I am finding it hard to draw from front pocket carry positions anyway so maybe its just me. Glad I didn't spend too much money on it.

This holster works well for both my kahr pm9 and s&w 642. It works well for me especially since i'm left-handed. gun draws smoothly.

This a a great holster for the money! I have spent much, much more for much, much less. Thanks again for a great product at a great price.

in case ur wondering i am very pleased how this fits my guardian 32.

I bought one of these for my Ruger LCP. It works great! I carry all the time. The only trouble I've had is when I carry in an extra large cargo style pocket. The gun will fall grip sideways and it makes the gun difficult to retrieve quickly. Most pockets are fine. Very good for conceal carry.

I ordered this pocket holster with the idea of getting a pocket pistol. I couldn't go wrong with the price. I purchased a Kel-Tec shortly after getting the holster and now I carry both everyday. This is a very good set up. I showed the holster to some friends down at the range and they were all very impressed with both the quality and the way it looks in the pocket. As others have said, it looks like a wallet in the front pocket, not a holster and gun.

Got mine the other day with several other things and was very happy with the construction and material's. Excellant price for such a great product. Disregard the gentleman's comments about this only being good for (lefties) it was made for right handed people. The reason for way it's cut is because this way it doe's not " print " a gun outline on your pants. As with all holsters a little practice time is needed to use it correctly. Again buy this product, you will not be disappointed. I have a beretta tomcat in 32 cal. and it holds this gun perfectly --- like it was made for it. nuff said.

This thing is great for the price! It works best if you're left handed..I carry a Kel-Tec .32 It's not practical for front right pocket or w/snug fitting jeans either. It's definitely worth it though. I use it in my back pocket also.

I ordered this holster from CTD about 2 days ago and just received it. I was expecting the quality to be much less having only paid 6 bucks. Everything about the holster is top quality. The inside is soft and slick and I do not foresee it damaging the finish on my gun even after years of use. The outside has little rubber grippers that grab the inside of my pocket well. I practiced my draw 5 or 6 times and the holster stayed in my pocket every time. I use it to carry my S&W Model 638 snubby and it fit so well in the holster it was like the holster was made for my gun. The holster has excellent concealment, it looks like a wallet in the front pocket of my Dickie's that I wear to work. My only wish is that it came in right-handed model. Though it works fine in my right pocket, it would be nicer if I didn't have to slide my fingers under the flap to grab the handle on my gun. Still a great holster and worth the money even if you're right-handed.

Works fine on my walther ppk/s 380.

I carry a Kel-Tec P32 with a belt clip on the right side and an Arma-Laser sight under the barrel, and this Ace Case pocket holster is a good fit, no problems. I don't carry in a pocket that often, but when I do it's front pocket, and this holster is what I use. Access is fairly good, the draw is smooth, and the rubbery ribs around the holster exterior do a good job of keeping it in your pocket. It does print like a big fat wallet... not sure that's a good thing (invisible would be better), but the alternative (printing like a pistol in your pocket) would certainly be worse. I'm very satisfied with this product, and consider the 6 bucks or so I paid for it a genuine bargain.

I just got my holster from cheaper then dirt.com. I am more then satisfied with the product. If you are reading this review, buy this product. For $5 this is the best holster for the job. I have never pulled the holster when trying to pull my kel tec P3AT. I would have paid $50 for this product. I highly recomend this holster.

Perfect for the Keltec P380. Prints like a big fat wallet, stays in pocket during draw. Had been using a kydex product, and it wore through the parkerization in places. For the price, this inside the pocket holster is a better value than those offered by the big guys or the leather gurus.

Always looking for a better way to carry my pocket pistols, I ordered two of these little buggers right away. They came today, and since I had a snow day from work, I decided to give it a carry test. I couldn't be more satisfied. My biggest concern with most pocket holsters is that despite their advertising claims they still print "gun" in even the loosest fitting clothing. I've tried all of the Uncle Mike's and several others, and with the exception of a generic wallet I got from an auction a while back, I've never been happy with them. Since the reason I carry a pocket pistol is that it is small enough to be unnoticeable, I want somethng that will mask all outline of my gun, and still be small enough to fit in my pants pocket. This is it. What makes the Ace Case holster so good, it that it is made of very durable cordura material, and has a reinforcing band around it that makes the holster very stiff. Placed in the pocket, it prints "wallet" if it can be detected at all. The liner is smooth, and the gun slips in very easily, and is held in place by that tight, stiff band. Oh yeah....and it cost six bucks!!! This holster is just about perfect for the J-22. I also tried it on several other pocket guns, including the Raven, the Galesi, and the Lorcin L-25. Perfect. NO print, easy to access and draw, fits in both the front and back pocket of jeans and Dockers, and protects the gun well. It also worked very well for my S&W 38 snubnose revolver. Althought the grips project from the fabric, they do so at an angle that is unoticeable in the pocket. The holster did not work so well for my Jimenez JA-380 and my Davis P380 though. These guns are thicker and fill the entire holster, and subsequently printed their outline in my pocket. Their outline is barely detectable, but that is enough for me not want to use it with those guns.