|
|
Ruger 10/22 fiberforce stock is constructed of black glass filled nylon and comes complete with ventilated upper handgaurd and sling swivel studs on both the front and rear. May be used with either open sights or scoped guns. No gunsmithing is required and it is weather and scratchproof. Will work for semi automatic rifles, but will not work on a bolt action or a Bull/Heavy barrel. Made in USA. Overall length 29.5", length of pull 13.5".
For Specific Warranty Information or Technical Assistance , you can Contact the Manufacturer Direct
Advanced Technology, Inc.
102 Fieldview Drive
Suite 400
Versailles, KY. 40383
800-925-2522
We do not accept Returns through Cheaper Than Dirt!
Advanced Technology RUG3000
 |
|
Average Customer Rating:  |
| Out of 19 Customer Reviews! |
| Write a Review! |
|
 dragunov stocks kick butt, 04/02/2008 |
| Reviewer: jason from nor-cal |
| I've had mine for around a year and it's the most comfortable stock. It did sit a little low towards the butt so I shimmed in between the trigger assy and the ridge it sits on with an 1/8 inch piece of rubber. You will never want to shoot from another kind of stock again. THIS IS MY 10-22. THERE MANY LIKE IT BUT THIS ONE IS MINE! |
 good item, 02/21/2008 |
| Reviewer: Impulse |
| this is a very strong stock it could have a higher cheek peice but other than that i could never even get it to get a scratch on it |
| Dragunov Stock, 02/12/2008 |
| Reviewer: Bad Karma |
| Ok here is the real deal on this stock. It is light weight, Strong, and very scope friendly. You can still use iron sights, but, it lines up better with a scope or a halo sight from the cheek rest. I am very very pleased with this stock. Even if i had money to throw away on the more exspensive stocks i would buy this one again. The vent guard on top snaps on but it is a very strong hold. If your sick of the heavy wood stock that came with your 10/22 when you first bought it, like i was. This is your way to go. Hope this helps.
It is better to have an Army of sheep lead by lions than an Army of lions lead by sheep. . . |
| great, 01/29/2008 |
| Reviewer: Dale DE |
| best 40 bucks ever spent on a gun ,shoulders great ,gets your firearm and eye in sync fast, much better than some of the more costly stocks that I have tried. |
| 10/22 drag stock, 01/25/2008 |
| Reviewer: Miel |
| My receiver dropped in easier than on the original stock and it looks fantastic. The stock is sturdy enough where I don't think I could ever imagine breaking it. Only flaw is rough edges at the seems otherwise this would be a five bullet product. |
| Good Inexpensive Stock, 12/20/2007 |
| Reviewer: Jeff T |
| My Rifle dropped right in no problem.Really cool looking too.Great stock for the price. |
| It's not the stock, it's you, 11/16/2007 |
| Reviewer: Harper |
| This is a very nice stock. It's made from what appears to be a high-grade polycarbonate with a fiberglass insert in the handle. It fits extremely well to the 10/22 action, almost better than the factory stock. I'm shooting ragged holes at 50 yards prone with this, so if you're having accuracy problems, it's not the stock, it's you. |
| Good stuff for the Price, 09/30/2007 |
| Reviewer: b |
| Does not look cheap at all. It seems to be lighter than the stock stock, being a .22 you really do not need a sturdy stock as most know. I did have one problem with my Weaver see through mounts. The one closest to the muzzle over extended the receiver a bit requiring me to cut a bit of the stock away but barely noticeable. Otherwise it looks great would definitely recommend it. |
| Good stock for the money, 08/07/2007 |
| Reviewer: Inferno |
| If you are looking for a good stock at a cheap price, this is it. It is easy to install and my gun fits snugly inside. I can shoot 1/2 inch groups with this stock at 75 Yards. It is oviously not top of the line materal so I would not abuse it too much, but what do you expect for $40. It is not quite as cool looking as a real Dragunov, but I added a scope, muzzle brake and bipod and it made my firends jelous. The only other problem is that the cheek rest needs some work, it is a little too small. I am giving this stock 4 bullets because for the money it is a great stock |
| Stock Rocks, 06/17/2007 |
| Reviewer: PA pat |
| First off, this stock is not cheaply made william, you must be a gun snob and you too ben. Flimsy? you act like its a wet noodle. Im getting great groups at 100 yards. Operator Error is my guest. The next stock up from this one would be the tapco or the C&C Enterprises, but they are 80 bucks plus. If you are willing to spend 100 bucks on your 10/22 this stock gives you 60 to spend on other stuff. Your on the money JSteve, its lightweight and pistol grips are really cool. If you want to shot great, buy more ammo or take class. If you want to have a fun day on the range, the is a purchase you will enjoy and if not its only 40 bucks. I think it looks the best out of the other pistol grip stock out there. Most of the others look too much like shot guns. This stock is really cool. You will have fun with it. Enjoy |
 buyer beware!!!!, 04/16/2007 |
| Reviewer: William from Indiana |
| The only good thing good about this stock was that it was light weight! The was made cheaply. It was to flimsy for shooting any good groups. Its worth paying an extra $20 or $30 Hogue or other. But before you buy this stock, stick with the factory stock.
|
| MUST BUY, 03/30/2007 |
| Reviewer: Lt. Barbour |
| This stock is a MUST for the serious 10/22 target shooter. Before you judge, the stock will appear to be cheap out of the box... but install the action and you will truly be impressed!!! The 100% floating barrel will allow you to shoot brick upon brick of .22, heat the barrel, and avoid warping from the factory stock. HIGHLY recommend getting a 3x9 scope with it too. The stock is a bit too raised to keep a tight bead on the iron sights. Besides, it was made for a scope. Go with Simmons. Just like the stock, you get a lot of bang for your buck. (I swear I was not paid to write this, just think credit should be given when due) |
| awsome, 03/29/2007 |
| Reviewer: chrmm19 |
| This most be the best gun related 40 or so dollars spent buy it now it looks great on my 10/22...puts the original stock to shame easy install |
| Awesome, 03/22/2007 |
| Reviewer: Rusty shackleford |
| Awesome stock its alittle smaller than i thought, but its actually pretty sweet. i love it. |
| GREAT STOCK!!!, 03/20/2007 |
| Reviewer: RANDY |
| THIS IS A GREAT STOCK!!! VERY GOOD GRIP MADE GREAT AND TUFF!! GREAT PRICE ITS A VERY GOOD DEAL!! FOR THE MONEY ITS GREAT!! VERY PLEASED!!!!! HAS A GOOD FEEL TO IT!!! EASY TO PUT A GUN IN IT!! LIGHT WEIGHT!!! OVER ALL 5 STARS!!!!!!!!!!!!!! BUY ONE YOULL LOVE IT I KNOW I DID!!! |
| Good value for me, 02/10/2007 |
| Reviewer: JSteve |
| I like this stock for my purposes, but it may not be for everyone. The two things most important to me with this stock are: 1. Lightweight 2. Pistol grip. It is a cheap stock as one reviewer pointed out, and for my 10-22, that’s what I wanted, but I’d refer to it as inexpensive. The factory stock looks better, but for plinking and fun, I enjoy this stock more. I also put a velcro camo wrap I bought from CTD, wraped it from the front top cheek piece back to the butt and can put an extra mag or two on the right side. Wrap it tight, it works. I wouldn't do that with the factory stock. |
| Very Nice, 12/27/2006 |
| Reviewer: Austin |
| If you own this rifle, you owe it to yourself to get this stock.
I could continue to write about this stock, but just get it and see for yourself. |
| I like mine, 12/14/2006 |
| Reviewer: John |
| I love my stock. The pistol grip is very comfortable. The weight savings are the best as I carry mine a couple miles in the woods almost every day. It looks prety cool too. I have had no problems with mine, very sturdy. |
| It's good, but..., 11/28/2006 |
| Reviewer: Zerstorer1ss |
| Occasionally the handguard pops off a little bit, and must be pushed back into place. The overall length is much better than the factory stock, and the pistol grip fits my hand nicely. |
Tell a friend about this product
