Recently shot 400 rounds thru just 3 of these. They worked perfectly. Easy to load once the sping loosens up. Feed was flawless. I have only 2 minor complaints: 1)It's unfortunate that this mag requires that long front catch for it to work. They are a pain in the bumm to put in a pouch/carry. 2) At the range a fellow shooter had the speed loader that allows one to push in a full stripper clip into th mag in a couple seconds. There was enough wiggle room that this device didn't work. The tip of the slug would catch on the mag. I suppose one could shim this somehow, but it wasn't mine to try.

I have several of these mags that I use in my Yugo SKS collection, and I plan on buying more. Compared to the "cheapo" metal magazines, these are FAR superior. I haven't had one mis-feed or jam with these mags. They are sturdy, funtional, and you can't beat the price for the reliability. I've read complaints of feed problems with these magazines, and to be truthful I don't believe it's a magazine issue. I have always used brass cartridges in all of my SKS's as opposed to steel casings, and I've NEVER had any problems. If you're having feed, stovepipe, or jamming issues, think about changing your ammunition before bagging on the Tapco magazine. JMHO

I have only used them once but wow,no feeding problems at all with my 52R.I will buy many more.Thankyou CTD

I just received two of these mags today. They are 10 times better than any other SKS mag Ive tried. I didn't even have to modify my original Yugo stock. Tight lock up. Easy to load.Feeds great.Inexpensive. Only complaint is bolt has to be open to insert or remove-mags lock bolt open on last shot. They did want to dent wolf 154 grain soft points tips as some one else mentioned. With full metal jacket ammo feed like the original ten round magazine. THESE WORK. I plan on buying more soon-different colors for hollow points/FMJ. The search is over for a reliable SKS mag. CTD needs to talk Tapco into making 30/40 rounders also,or possibly a drum-that would be awesome!

I bought three of these mags and they work great. I just came back from the range and all three are wonderful. They only issue I came across was that I used soft point rounds in the first mag, they kept smashing into the bore and getting jammed. But when I used FMJ they feed well and work great. Just be sure to obey the warning and only put in or take out when the bolt is open or you will end up with a cracked mag, as my friend found out on his.

Finally!!! SKS mags that work. Like the Tapco stock, they fit and work great - just as the other reviewers say. I have had them for only a short while but have tested them dry and once at the 'range. No misfeeds and the bolt locks open every time. Good job, Tapco! I think I can finally stop looking and complaining. I think time will back me up. I like the price and the 20 rd capacity is my ideal size. I also made them work in my wood stock by doing just a little filing of the wood around the mag well, as advised - so don't forget.

I have a folding stock, which has made it tough to find a mag to fit. I have tried plastic and metal and i tried to modify some of them and they ended up being smashed by a hammer or i ran them over. I ran around all weekend with this clip fully loaded (20 rounds) and never had a problem at all. When the clip is empty the bolt WILL stay in the open position. The clip loads smoothly and CLICKS right into place. you still have to open the bolt to unload the clip like most other sks applications. I rated this with five bullets only because it was 100% FLAWLESS

bought 2 of these an like everyone else says they work great lock right in feed great well worth the money tapco needs to make a 30 rounder an a 40 rounder that work as well as these do i definately plan on buying more

i have an sks with a nice monte carlo stock and scope, but it came with a steel 30rd that jammed constantly. i had to modify the bullet tray in the mag the ramp to the barrel itself and the extractor just to get off 3 rounds i thought my sks was doomed to jam. this tapco mag slipped right in perfect fit. and you can just pour bullets through this thing. very smooth.

i just got a yugo sks for christmas it came with a crapy 30 round mag that if u put more then 5 rounds in it jamed so i ordered 2 of the tapco 20 rounders. it fits perfectly and works great im so happy get one i dint have to modify it or my gun at all and i have a wooden stock so i thought i was going to have to but its awsome get 1 of these tery for your self.

After having tried a steel magazine(which sucked!) that a friend gave me for my SKS, this mag rules. I know have three of them and plan to buy more. They feed well and you don't have to play with it to get it to work. If you have a wooden stock you have to shave the stock, but thats ok. As I said you can just pop it in and shoot.

Excellent quality & perfomance. These are the only hi-cap SKS magazines that never jam or fail to operate. Tapco makes the finest shhoting & military gear so you can expect the best from this product.

These Tapco 20rnd clips rock! they load and feed very easy and i have had no issues with them so far. If the spring is a little tight at first, don't panic. Keep workin em in and let them set over night. I haven't had a single problem with them yet. I was surprised by how sturdy they feel. If i run into any issues i will be sure to post.