Bought this item for my P-95DC and so far it works great. Feeds rounds nice and fits in the gun great. Only problem has been that the clip didn't want to stay in the gun. So after locating a small screw driver i bent out the top of the retainer hole and bam problem solved. Now it's working great in every way imaginable. would recommend.

This fits my S&W 5903 great and works flawlessly.

I bought this clip last week. It arrived in two days and it fits my Ruger p95 perfectly. It looks bad ass! I’m itching to take it to the range this weekend! If you don’t have one you need one.

I bought this at the store via the catalog desk for my Ruger P85-MkII. I didn't even think of trying it until: 1. Compared it to a factory 15 round magazine - YES, it is not a perfect match to the factory mag. With 5 minutes of my time & a pair of jeweler’s pliers I had it VERY close in alignment of the top fingers & proper spacing of the same. The factory magazine loader is a great go/no-go gauge. 2. Disassembly & cleaning of the Magazine/ - This magazine is heavily coated with cosmolene (tacky tannish goop used for preventing metal from corroding. The ole Breakfree Cleaner/Lube got things cleaned up nicely. 3. Exercising the spring. After assembly, I sprayed a generous coating of breakfree into the magazine & cycled the spring about 5 times. I then loaded & unloaded 30 rounds 4 times before inserting the magazine in my P85 (It clicked the first time and stayed!) and manually cycling the 30 rounds through the gun. Not an issue. And the magazine dropped straight to the carpet without hesitation. After leaving it loaded for a week I went out to the land and fired 120 rounds through this magazine with out a hitch. And yes, I lost count one time and fit 32 rounds into this mag. This was a great find for lest than $13 and a little bit of time/effort. I'll be stopping by again this weekend to grab one or two more. What a hoot ripping off 30 rounds without reloading.

Just purchased,had loading issues at home. Got to the pistol range and this magazine jams,misfeeds,and fits very loosely.Enjoy CTD ,but this is a bad product,gonna try the pro-mag version,a friend says it will fit my p-95.

Well, I got it, looks like it was old military surplus construction, tried fitting my regular 9mm ammo in, didn't fit, so I had a box of slightly shorter 9mm, and some hollow points, they fit just fine, and i can put in 35+ rounds!!! Tight spring, decent metal work. On my P93DC you need to put it in and back to get it to lock into place, so like put it in and pull the mag towards you. Cant beat the price, you get what you pay for. Im going to buy another...

I'm astonished at how quickly this mag got from Texas to Georgia to my dumpster. Very poor worksmanship. There was a crack that extended from the top to the bottom of the back of the magazine, straight down the middle. The 'blueing' looked more like spray-paint, & the fit was horrendous in my P95. Absolutely terrible. The mag would simply fall out if I tilted the weapon downward. I'd give it 0/5 if I could. Glad I only flushed a few on it. Cut & dry : Do yourself a favor & buy a better quality product.

I put the clip in and was excited.It had a great fit and feel. I love it. But i wish having this clip made my ammo cheaper, but thats not the case.

These are very nice fitting magazines for p-89. They Drop free when the mag release is pushed!! They are semi-blued steel but that doesn't effect the function.

i have purchased several of these over the years. this one is a some what different model than my others, but it functions just as smoothly. as soon as i opened the package i took the 30 round mag as well as the 2 15 round mags i ordered with it and stripped them apart and buffed the well with a dremel. put them back together loaded them , went out back and fired 3 full from each. no malfunctions jams or errors. thanks CTD

I purchace 22 of these 30 rd mags at the end of May 09 and got them 7 days later I could not wait to try them out. I loaded them up and took them along with my Ruger PC9 carbine to and out door range,set up the target,insert the mag and cocked the bolt and let her rip with rapped fire,all 30 rounds fired great without jamming one mag after the other,all 22 mags worked great.I recomend these mags there are a great buy,thanks ceaper than dirt Ill be buying more of these great mags

i bought one several years ago. the only thing i had to do was clean it up and stretch the spring alittle. i've shot several hundred rounds from it with no problems!

I have a P89SS. At one point I figured I might as well try one of these, though my expectations were pretty low. I was thoroughly surprised, the first one I ordered was well built, fit snugly, and performed flawlessly. I then ordered several more, and now all four of mine have had hundreds of rounds through them without any real issues. The only, quite minor, problem I have run into is that after putting 32 rounds through the same magazine several times in a row the slide will lock open and one more round will be in the magazine. Try them for yourself, you won't be disappointed.

I'm not sure what the other reviewers are doing wrong, but I have shot hundreds of rounds out of mine with no jamming, falling out, or any other problems. My only problem is I don't have more! Buy 'em before they are made illegal.

Magazine jams before I even get 15 rounds loaded in it. Then it does not feed properly with more than 10 rounds in it. The follower is very sticky and alot of brown residue inside. These were a complete waste of money.

i got 1 .2 months ago frm here for my p89 buying more tonite .shot 30 rounds 4 times in one shooting worked very well . was very mpressed. every thing i have gotten here so far has been good products

Good luck getting these clips to even load more than 15 rounds much rather actually shoot more than 5 or 10. These make better trotline weights than they do 9mm clips. One word...JUNK.

I just bought 2 more of these mags. Mine hold 32 rounds, no feed problems on my dk95 w/fmj or hp.

bought this item. shipping was fast but the mag does not function properly. after putting 3 rounds in the mag it jams and rounds get stuck in the mag. I do not recommend to anyone.

This magazine needs to me modify a little to fit on my P-95 You need to select the kind of ammo to use in this magazine. Monarch 115 GR from Academy do not fit god. Winchester 147 GR JHP fit perfect, because its a shorther bullet. None of this problems exist on the original 15Rds Magazines. Best Regards.

This mag will not cycle 115 gr. FMJ's. You must run the shorter hollow points or the flat nose rounds like UMC leadless. With the hollow points I can load 34 rounds and run them high speed with no problems. If you own one of these forget the FMJ's.

Great concept but the cartridge carrier gets jammed inside the magazine. I can load 15 rounds but after 15 cartriges jam in the magazine, even after properly aligning the rounds against the rear of the magazine. Doesen't provide a proper feed either. Thumbs Down!!

I own a Ruger P95, yesterday I unloaded 350 rounds out of it using this clip (33 rounds at a time). A little modification is required, when I first shot it the clip droped to the ground after approx. 4 shots. No big deal, I simply wraped some electrical tape around the 10 & 15 Mark and now it seats more properly, and never falls out agian. This is a great aftermarket part, works great, doesn't jam. I would reccomend this item to anyone, great buy, cant beat it.

LOT OF FIRE POWER!! WORKS LIKE A FACTORY RUGER MAG OR MAYBE BETTER!!NO TROUBLE AT ALL.

Mine actually holds 33 and functions flawlessly in my P95DC and in my buddies P95DCS.330 + rounds and counting.