Cheaper Than Dirt - America's Ultimate Shooting Sports Discounter
Cheaper Than Dirt - Shopping Cart
Cart (0)
$0.00
America's Ultimate Shooting Sports Discounter
Category:
AR-15 Push Button Take Down Pin KNS Precision .250" Diameter Spring Loaded
ImportantPlease Note
We're sorry, but this product is no longer available.

Please click here to be notified by email if this product becomes available.
Brand: KNS Precision PBTD250
Item: ARR-360
UPC: 851876003042

This .250" diameter take down pin has a spring loaded push button. When pushed, the stainless steel keeper pins retract for easy pin removal. The pin is designed to eliminate wear in and around the hole caused by pins with spring loaded balls. The steel has a black oxide finish. The button also has a drilled cross hole which allows for the installation of a seal wire to prevent tampering with the guns internals.

Made in the U.S.A. with a lifetime warranty from KNS Precision, Inc. For Warranty questions please contact:
KNS Precision, Inc.
112 Marschall Creek Road
Fredericksburg, TX 78624
1-830-997-0000
info@knsprecisioninc.com

Customer Reviews

Most Helpful Customer Reviews

0 of 0 people found the following review helpful
4.0 Rating Helped me out - 12/29/2008
Reviewer: metoojohnjr
Units solved a big problem for me on a new build as I did not have to install any detent springs! Units go in easy, but are hard to remove as once you push the button, nothing to hang on to pull them out... I end up pushing from the backside, but you can only push on the edge to avoid pushing on the inside pin. Nice product, just need a ring to grab to pull the pins out (they are drilled)
Was this review helpful to you? 
0 of 0 people found the following review helpful
3.0 Rating Don't use this with an acu-wedge - 5/13/2009
Reviewer: cobrafreak
Yes, as the other reviewer says, these pins are difficult to remove. You must push the button while pushing on the other side with a bullet tip or screwdriver. Love/hate relationship with these things. They do eliminate 4 parts on the gun, the pin springs and little tabs that hold the stock pins in place, which is great, But they are neither fast or easy. But maybe with practice :) . I had to remove my accuwedge device from the gun as these pins were almost impossible to remove with them installed. If easier to remove I would give them an extra bullet.
Was this review helpful to you? 
0 of 0 people found the following review helpful
4.0 Rating addition - 5/14/2009
Reviewer: cobrafreak
I oiled the pin and inserted it and removed it about 25 times and it goes in and out very smoothly now. This is a good product. Still, do not use this with an acuwedge as it will prevent the pin from exiting easily/smoothly.
Was this review helpful to you? 
0 of 0 people found the following review helpful
5.0 Rating a must have - 5/7/2010
Reviewer: swinger
this works very well. much easier using this then the original pin and detent. also you can get rid of the spring that you always either lose or bend/break when swapping stocks. you cant use an accu-wedge buffer with this, but who knows if they actually work anyway. you can remove this without a bullet or tool. it just takes practice and pushing on one side with a fingernail, while keeping the pin depressed on the other side.
Was this review helpful to you? 
0 of 0 people found the following review helpful
5.0 Rating Works great - 7/2/2011
Reviewer: TonyT
Man these things work great. I was a little worried after reading some of the other reviews saying they were hard to take out. Mine came out with no problem. I lost my detent spring when I took my stock off and these were a good solution. I put a little oil on it before I put it in the first time and it is easy to put in and take out and it holds the gun together nicely.
Was this review helpful to you? 
 
 
Cheaper Than Dirt!
Cheaper Than Dirt!
Terms of Use | Privacy Policy | © 2014 Copyright, entire contents by CTD, Inc.
Cheaper Than Dirt is a registered trademark of Direct Investments, Ltd. All Rights Reserved
This website is best viewed with Internet Explorer 8.0 and Firefox 15.0 with a screen resolution of 1024 x 768 or higher.
AR-15 Push Button Take Down Pin KNS Precision .250 Diameter Spring Loaded
AR-15 Push Button Take Down Pin KNS Precision .250 Diameter Spring Loaded
x
Sign In
New Customer? - Create an Account
Shopping Cart Summary
Cheaper Than Dirt - Close Shopping Cart
Subtotal: