New customer? Click here to login or create an account.  Click to Sign In
Category: Lasers » Weapon Mounts for Lasers
Laserlyte Shotgun Tri-Rail Mount 1.5 Rail Fits Most 12 Gauge Shotguns
Click here to view a larger image
Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns
Our Low Price:
 $23.21

Ships from warehouse: What is this?
More Buying Choices
Warehousefor $24.97Show Me
Warehousefor $30.76Show Me
Warehousefor $27.61Show Me
Warehousefor $27.61Show Me
Warehousefor $25.96Show Me
Warehousefor $23.08Show Me
Share
Manufacturer: Laserlyte ADPTRIR140
Item: 2-LLADPTRIR140
UPC: 689706209278

Set up your tactical or home defense shotgun for maximum versatility and low light performance with this new Tri-Rail Mounting System. Lightweight and durable, this system positions three Picatinny rails at the front end of the shotgun where flashlights and/or lasers are best located. Easily mounted on the magazine tube of most popular 12-gauge pump shotguns, the Tri-Rail takes up under 1.5 inches of space ahead of the forearm. Made of tough aircraft grade 6061 T6 aluminum with a matte black anodized finish, the Tri-Rail attaches in minutes with two machine screws.

Adds 1 ½" of tactical rail to your 12 gauge shotgun
Clamps in place on your magazine tube.
Universal fit
Compatible with most 12 gauge magazine tubes.

Weight: 0.8 ounces, rail length is 1.5", inside diameter is 1".
Here's What Others Bought When Buying This Item
 
BLACKHAWK! Two Point Shotgun Sling and Shell Holder Black Finish 43SS15BK
BLACKHAWK! Two Point Shot...
4.5 Rating(12)
$15.52
Scope Mount Mossberg Shotguns Leapers UTG 5.5 with 13 Slots Aluminum Construction
Scope Mount Mossberg Shot...
5.0 Rating(46)
$9.97
Leapers UTG SWATFORCE Series Combat 37mm IRB LED Flashlight with Interchangeable QD Mount
Leapers UTG SWATFORCE Ser...
5.0 Rating(3)
$57.76
TacStar Tactical SideSaddle Remington Shotshell Carrier 12 Gauge 6 Rounds Black
TacStar Tactical SideSadd...
4.7 Rating(3)
$27.34
ATI 5 Shot-Shell Holder for ATI 6 Position Collapsible Stock Black
ATI 5 Shot-Shell Holder f...
No Reviews
$13.88
  
Average Customer Rating: 4.3 Rating (13 Customer Reviews)  Write a Review!
Page 1 of 1 (13 Reviews)
‹ 1 ›  Show All Sort:
5.0 Rating Laserlyte Tri-Rail mount - 5/7/2013Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns5.0000
Reviewer: FARC
A wonderful little setup for the mag tube of my 870 12 Ga clone, and rails fit the flashlight attachment perfectly, and did not interfere with my Magpul fore stock. I am a big fan of "just in case", and although I don't see this thing moving or bouncing around, I would still recommend a dab of red LocTite on the mounting screws, a cheap step for extra insurance!
5.0 Rating single-bi-tri rail - 3/6/2013Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns5.0000
Reviewer: Moss 5 pursuader
Nice little addition to my 12 gauge. I took into account to be easy on tightening the screws. One thing I did that helped was cutting small strips of an old ruger sticker and paste them on the inside of the rail. This really helped in fitting it tight and keep it from moving and scratching the mag tube. Many variations of ways to mounnt lights and lazers. A must buy!
5.0 Rating Sturdy Steel, finally - 10/26/2012Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns5.0000
Reviewer: Tri Rail
This is a nice piece. It mounted very well at the end of the shell tube. The laser light I mounted to it kinda sucks, but I do like the tri rail. Get one.
2.0 Rating Meh - 9/14/2012Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns2.0000
Reviewer: Jacob
On Remington 870 with 18.5" barrel and 2 round magazine extension. Well, it went on easily, didn't scratch anything, screwed in fine, and stayed attached firmly. The problem I had with it was that, because I have to remove it to take the gun apart, the hex bolts stripped very fast - after only about 4-5 cleanings, there was already a problem. I ended up not being able to remove one of the screws and had to cut through it to get the rails off my gun. If I could replace the screws, I would still be using it, but they are fairly specific machine screws that I haven't been able to find a matching part for.
4.0 Rating Just Installed - 8/16/2012Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns4.0000
Reviewer: Daniel Byars
I own a Mossberg 500A with an 18.5 inch barrel, collapsible stock, and factory heat shield. I had read the previous reviews, detailing difficulties installing this accessory on my particular shotgun. This is the five round tube, not the seven round, full length tube! I just finished the installation and I have the following to say: You MUST bend the heat shield flange inward (tighter) to allows the flange to fit inside the rail. You WILL have a difficult time aligning the rail holes and the heat shield flange holes with the factory plastic spacer block holes. I wrapped electrical tape 2 times around the upper portion of the tube, exactly where the rail sits. This created a snug fit before I pushed the heat shield flange inside the rail. NOTE: The factory hex head screws and the provided screws ARE NOT LONG ENOUGH!! You will strip the aluminum threads if you attempt to tighten or over tighten. I used a 1-1/4 inch, 1/32 thread pitch servo screw, which allowed me to use the factory nut that the heat shield came with. All said and done, with a TLR-1, a FANTASTIC set up! Good luck.
5.0 Rating Rail - 6/17/2012Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns5.0000
Reviewer: Matt A
Very easy to install. Comes with the Allen wrench, and with the turn of two screws, it is mounted on your weapon in seconds. Very sturdy and worth the money.
1.0 Rating Junk - 5/14/2012Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns1.0000
Reviewer: Wildman
Don't waste your money on this garbage. I installed it and it still turned a little on the magazine tube, scratching the parkerized finish. It had to be really tightened down hard to stay, and this resulted in it getting stuck on there. You have to remove this from the mag tube to unscrew the tube to clean it. The tiny little Allen screws that hold it in place stripped and there I was, with a cheap Chinese piece of junk, stripped and stuck on my expensive American tube. Find another solution, because the soft Allen screws on this thing ruin it.
5.0 Rating Great Addition - 4/14/2012Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns5.0000
Reviewer: R Wolf
Great little device. I have added this to two of my riot shotguns and it certainly beats the devices I was using. Easily put on the weapon and stays secure when firing. Cheaper Than Dirt gets two thumbs up on this one!
4.0 Rating Great Product - 2/22/2012Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns4.0000
Reviewer: Rafterman
Very well made, easy to install, and it went together nicely. I recommend it.
5.0 Rating Great Laser Rail - 2/10/2012Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns5.0000
Reviewer: Robert Wolf
This is a great rail adapter for your shotgun. I put it on my 870 police riot shotgun and added a light/laser combo. Works perfectly, it's light weight and strong. No possibility of shifting around.
5.0 Rating Bought 3 More - 10/16/2011Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns5.0000
Reviewer: Old Cav Scout
I bought 3 more of these for other guns that I am building.
5.0 Rating Just a great item - 10/3/2011Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns5.0000
Reviewer: Brock
Slipped right on, mounted my new Tactical light from CTD, good to go. Took some advice from other reviews and mounted it so it would not need to be moved again for cleaning and etc.. Seems to be real solid will be very surprised if it moves from recoil. Great service and delivery, items came from 3 warehouses all same day 3 day service to SW Florida.
5.0 Rating As Advertised - 9/10/2011Laserlyte Shotgun Tri-Rail Mount 1.5" Rail Fits Most 12 Gauge Shotguns5.0000
Reviewer: OLD Cav Scout
Well made, perfect fit, very happy.
 
Our Guarantee | Return Policy | Change Account Information | Privacy Policy | Government Sales | Forums
Product Map | Order a Catalog | Join Our E-Mail List | Shipping Information | Gift Cards | Hot New Items | Closeouts | Retail Store
Ask A Question | How to Order | Track Order | Mail Order Form | Firearm Order Form | FAQs | Terms of Use
© 2013 Copyright, entire contents by CTD, Inc.
Cheaper Than Dirt! is a registered trademark of Direct Investments, Ltd. All Rights Reserved

This website is best viewed with Internet Explorer 8.0 and FireFox 7.0 with a screen resolution of 1024 x 768 or higher.
Laserlyte Shotgun Tri-Rail Mount 1.5 Rail Fits Most 12 Gauge Shotguns
Laserlyte Shotgun Tri-Rail Mount 1.5 Rail Fits Most 12 Gauge Shotguns		x