Best thing I've bought in a while!

For those old school folks like me out there, who much prefer the AR's with no bells and whistles on them. This is a must-buy! Fits perfectly on my DPMS Lo-Pro, and goes very well with UTG's detachable front sight post.

I purchased this carry handle on 5/5 at 1:51pm and received my confirmation that it had been shipped at 2:00 pm, and i received my carry handle at 2:00 on 5/6. I am very happy with the product also it is heavy duty, everything works as it should, it fits on my hi standard perfectly, there is a very very slight difference in color, not enough to even notice. As always CTD delivers another great product, lighting fast.

There should be no whining about this carry handle, it is Mil-Spec all the way. Nice product and it fits well on my Yankee Hill upper receiver. Don't hesitate to buy this handle. If you go for a $70 to $120 product you'll just be getting yourself ripped off.

Decent looking carry handle, coloring is ok. The one I received had a small imperfection there was a manufacturing mark on the sight. I will not be using it as the main sight but as a backup.

Great service fast shipping and best of all an accessory that's reasonably cheap but very effective. Unit fit my AR like a glove and matched. Only downside is that the clicks sound very cheesy but for the price I can't complain.

Just got this for my flattop AR/M4. Coloring isn't great, half painted and half a different color. Definitely 100% Effective. I thought we'd be sighting in for a while out of box, but it was 100% on target with the first shot(s) at about 75 yards. Sights were dead on.

The first one I ordered was bent, but it was quickly replaced and I'm happy as can be with it. Very sturdy, not flimsy or cheap-looking at all. Would definitely recommend it to friends.

got my detachable sight today.. very high quality that i would expect on much more expesive units.. do yourself a favor and buy this handle...

This is an excellent carrying handle. Very solid, mounted easily and will not come off. I am happy with this purchase. I am a firearms instructor and know my way around an M-16/AR-15 and this handle compares favorably with DPMS or Bushmaster. I would reccomend this handle to anyone looking for a quality, reasonably priced handle.

Excellent quality unit, glad I 'cheaped' out and did not overspend. Visibly indistuingishable from my Bushmaster handle. Highly recommended.

Well, I got this to put on my Archangel 10-22 stock. It pretty much kicks ass. I had an old Colt A2 on their before to compare and there's no difference to me. The windage/adjustment knobs are a little stiff, but it'll break in with some use. This is obviously not the exact same thing as the expensive ones but for the price, I have to give it 5 bullets. If anything ever does go wrong with it, you have to remember it's cheap.

Not bad at all. The only thing I don't like is the sights slant a little bit when looking at it from the top, but in no way effects the impact. Do your self a favor and buy these and save a little money.

I purchased it to go on my S&W M&P 15-22. (I like the looks of a carry handle on an A.R.) It fits nice and tight. The elevation knob, when all the way down, doesn't lock in it's bottom position. But as soon as I turned it up, it starts to click and holds it's position. Other than that, I see no problem with it. As far as price, great price for a sight that goes on a .22 plinker!! Would even trust it on my 5.56mm. P.S. as my good friend would say, "TOYS,TOYS,TOYS!". Thanks CTD for the "TOYS"!

For the price, you can't beat it. Pros: Inexpensive, seems to mount well, doesn't seem to scratch up rail or receiver, and the sights are actually not that bad. Cons: The height and windage adjustment knobs are RIGHT next to each other, big fingers beware. The rail LOOKS like its not latched on both sides, but it is.. I shook it hard enough to break a pivot pin. (No worries, I didn't actually break anything) The rail knobs are a bit big, I understand this is for maximum torque when wrenching down on them, but a screw might have sufficed. Use a TINY bit of "Lock-Tight" on the threads before you tighten it down. That'll help it hold a little better. All in all, for the price I like it. Its definitely NOT like the ol'A2 handles.. but it'll get the job done.

So I'm only giving this carry handle 4 bullets because I've yet to go out and test fire with it. It seems sturdy, and best of all its not sharp around the edges, as to not scratch up your gun. Seems like this'll get the job done.

Great product for the money. Mounted quickly and like a rock, to my bushmaster flat top. Peep sights and adjustment nobs are strait and easily adjustable. Would have got 5 bullets but it is a little on the heavy side. Shipping was fast and on time. CTD does it again, Thank You.

For the price this item is great, only flaw on mine is the rear sight part is slightly rotated left. Easy to compensate thou. It is worth getting

Figured for the price it was a reasonable gamble, didn't want to spend $90+ for a handle. Haven't had any problems as far as adjusment nobs or sturdiness. Tighten the mount screws and forget about it. Haven't used it for targeting yet. I don't have a front iron sight. I use my holo sight for targeting.

This is a great product for the money. Of course there are nicer one but they cost twice as much. I bought a DPMS flat top and installed this carry handle on it the first day for the rear sight. I have fired over 1,000 rounds and this handle/sight has not loosened at all! Affordable and practical product from UTG. Buy with confidence.

A Very High Quality Removeable Carry Handle. The Price Is Great Compared To The Overpriced Name Brands. I Use These On My Rifles And Also Sell In My Store. No Disappointment Here.

Nice handle for the price. Heavy gage metal, nice finsh, good parts.

I have been look for a carry handle for my bushmaster for some time. I have looked at all the manufacturers for quality and price. This has both. This looks like the one on my M4 that I use in the Army. The elevation knob is a little stiff, but works well and I can tell it just needs a little breaking in. Take it from a guy who works and uses M4s all the time this is a quality product for you AR-15.

Matches my AR-15 perfect, fit and finish! Ready to go right out of the box. You will not find a better deal anywhere for the money. This could even be better than some hundred dollar ones I'v used in the past. Do what I did and just buy one, you'll be glad you did.

Bought this for my M&P-15, appears to be solid and well made and its paint job matches that of my M&P-15. I have yet to take it to the range but all seems well. I highly recomend this carry handle.

This carry handle a little to small to fit your hand BUT for the look and the sight this is a very good deal price can easy be a lot more

This is perfectly fit to my RRA AR15 A4. Easy to install, I love it for a change look to my AR15 with the price I paid for. Thanks to CTD for a lightning shipping.

spend the extra cash and get one that actually fits on a picatanny rail.... this one flew off and hit me in the face!!

In all seriousness, this carry handle works alright, but go the extra mile and buy one from rock river or an actual ar-15 manufacturer. When I zeroed this on my RRA Entry Tactical at 25 meters, I had to give it 8 clicks up and 13 clicks right. The clicks it makes when you twist the knobs for elevation and windage just sound cheap too.

I bought this carry handle for my Stag Arms model 2...it locked on securely and easily! It is a sturdy piece and is good quality for the price!

Decided to mount my ACOG on a carry handle instead of flat top of my M&P. I can't say enough good about it. Rock solid and durable. UTG makes good products and this continues the tradition.

I bought this for my new M4 build and it fits my RRA upper perfect. I am very pleased with this money saver!

This thing is good. It attached to my dpms with no problems and it accepted my scope rail. AWESOME

Works well on flat-top M4. Fits tight and has the standard 6/3 markings. May be from China, but who needs to pay $100 for a carry handle?

looked great when i got it out of the box but when i put it on my stag arms model 3 i found it jiggled on the upper receiver

the quility is great the fit is also fantastic! i have a olympic arms upper and it fit very nice, the color on it was the same thru-out. it is also the utg brand with the 6/3 on the elevation dail. the flip sight in the rear works smoothly. for the money you can't beat this product. it also holds it's zero!

This handle appears to have ok quality. It will NOT handle harsh recoil. The rails broke clean off when after 20 rounds on my .50 Beowulf

I didn't expect this quality at such a low price. Most "name brand" carry handles will run $100 (or more, like the LMT rear sight I was considering). Are they worth it? I couldn't tell you. I can tell you that this bolted right onto my flattop M4 and required only minimal adjustment to get zeroed at 25 meters. Until I purchase optics, this will do the job nicely. (I own three Leapers/UTG products and they're all quality.)

CTD ships two different Carry handle sights listed under this part number. One has the 6/3 marking and is the superior one, the other one does NOT have the 6/3 mark. It's been hit or miss with which one I've received in the past, however CTD seems to be shipping the better one more consistantly now, I hope they continue to do so (hint). I recommend this product, from CTD, to AR15 owners.

When i ordered this handle i was skepticle. But to my suprise it was everything they claimed and then some. The quality is great and compaired to heavy handles i think it takes more abuse. Unmounting and remounting changes nothing to your set. All and all great handle great price.