I actually bought the folding version of this vertical grip, same price as this one but has 5 lockable positions. Holds two CR-123 batteries, not three. Looks like Leapers got one right with this grip. Pitching the TAPCO vertical on my Mini-14 and ordering another folding one to replace it with. Folding version wasn't listed with the AR parts, just do a stock search and select LEAPERS,UTG to find the folding version.

Fits great. Finger grooves are comfortable and help control muzzle rise due to the texture. Worth it.

I put it on my AR and it has held up to the test so far. It is nice and tight. If you don't rough house with it you will be just fine

Foregrip was loose on rail. Took electrical tape and placed it on flat part of foregrip. It took slop out of grip. Mounted it on S&W 15/22.

I just put 100 rounds through m4 with this foregrip and the little black nipple that twists into rail to secure broke off. Now the thing just slides around. It is also so large you can’t not use it as an monopod if shooting off a rest. I guess you get what you pay for. I may try drilling out a hole and inserting a bolt and nut to use in the broken nipples place.

This grip is pretty nice. I used some sticky velcro to mount my pressure switch from my Leapers laser and it works great. It also works great as a mono pod. Having said that I had to tighten it up with channel locks to get it to clamp down onto my tac-rail. If my rail had solid bars across intstead of the open ones in the middle it probably would not have slid out of place, but it did and the channel locks clamped it down tight enough to hold. I would recommend this to anyone with solid bars and will buy another.

It's a good foregrip for the price, but thats about the best that can be said. After being mounted on an AK, the plastic nipple sheared off from the mild recoil. However, once I replaced the nipple with a metal screw and nut the foregrip is a champ.

Grip is perfect size and is made of very solid plastic

Ar-15 Leapers UTG tactical vertical handle is good. I've had it for over a year, and it still operates perfectly. Leapers finally got one right!

This thing is pretty solid...took about 5 blows with a punch and hammer to mount on my .308 free float...but now it's not going anywhere...it's a great buy though..going back for one more

This thing is a big piece of crap, do not buy. Get a better product. The same day I got it the nipple on the end that mounts to the rail broke off and now it just slides around. And there is no upper pin to keep it in place on the rail. Very poorly made and cheap plastic.

This is a great product and I recommend it.

Just installed to my Mini 14 with ATI stock. Went on quickly and improves grip. Laser and flashlight controls fit real good. I'm glad I bought it.

I recomend this grip to anyone wanting one. This thing holds down firmly and never moves, and I dont even have a bolt in it. Very nice.

Quality is OK but you cant beat this for the price.

I gotta say this Ar-15 foregrip works really great on my AR-15!!

The grip is wider than I expected- but that's good. Very sturdy and works well with a pressure switch. Best upgrade.

Wasn't expecting much given the price of this grip, but I was impressed. Solidly built, mounts solidly to my UTG quad rail. Very happy with this product. Hope it lasts, but it's giving me no reason to think that it wouldn't. Once again - CTD shipped this lightning fast. Thanks.

This thing mated up perfectly to my Daniels Defence free float handguard on my M4gery, its easy to use and adjust, and its comfortable. I have put this thing under my former Army Infantryman "gorilla testing" (I'm 6' @ 210-lbs and NOT weak). I pulled on it to stress it, knocked it around side to side... it stayed rock steady! I'm not saying its unbreakable, but it gets the job done. Great function & value for the money, and I would not say it if it were not so... GET SOME!! HUAH!!

Me and my dad both have these and they fit and work great. would and will buy more.

Bought one for my personal DPMS; I figured nothing to lose at this price. Loved it so much I bought one for my duty weapon, and recommended it to all the guys. CTD got it on my front porch in less than 48 hours. Amazing. As to the guys complaining after using it as the pump on a shotgun...WTH did you expect for this price???

I've owned quite a few of these, (at least 4) & consistently buy them because from a Tactical Perspective they offer value, balance, comfort, stowability, & most importantly they're the most useful & effective Foregrip I've found anywhere. I would've paid much more for a better Foregrip if there was one available, but the only one I've found to be even comparable is the CAA Grip with Mount, but that's almost 3 times as much money. With it's battery Storage compartment filled w/CR123 Replacements for your Tactical Flashlight, it's got a very solid & balanced feel. The two sliding panels on either side are the IDEAL size for holding any standard-sized Remote Flashlight Pressure-Switch (You don't even need glue if you buy the right size switch (it'll fit snugly into the grooves). So I have to rate this the best of the Tactical Foregrips, especially if you plan on mounting a Flashlight or Laser that requires a Remote Switch, because this is the best Foregrip design for remote switched applications. -Tactical Technology

Felt and looked great until it was put on a three rail forend and after 3 rem slugs out of an 870 broke off in hand. If intended use is anything other than an AR look the other way because this product is all cheap plastic. Huge disappointment.

Awesome feel however it didn't come with a screw to lock it on the rail the grip has a pin that tightens down from the top that wasn't quite long enough but a dab of liquid weld on top extended the pin and made a tight fit. GTG

This is the best bang for the buck I've bought from this site.

This grip is so simple to install, it took more time trying to get the right feel and placement than to install. If you have problems installing this you really should not own a gun. LOL Holds up as well with no moving. Great Buy

This product has everything you need at an excellent price. I love the features it offers plus it has a nice hold on the rails. Purchasing it from CTD was a smart choice.

Bought it back in January. Shot over 500 rounds with it. Have had no problems at all. Would recommend to everyone

Hard to beat the price but I had to take a pair of vice grips to the bottom set screw to get this mounted solid to my AR. There are better grips out there, but not in this price range.

This looked great and fit alright on my AR-15 at first. Slot for pressure switch is nice and internal compartment was good. With a bit of use however, I snapped it in half while adjusting along rail with my bare hands. Bought a CAA grip that works much better.

Great value for 20 bucks. Easy install on quadrail, can't beat it.

Added this to my WASR 10 using the UTC Quad Rail. Man, what an improvement for control of the Gun! I was not crazy about the way it is secured to the rail, its not pinned. But after firing off a 100 round drum, it held up great!

Great fir with the ARR-138 picatiny rail. Fits snug. Very Secure! Love it. *****

Put this on a a forward grip on my SKS and it works just fine. Have shot several hundred rounds without it coming loose/need to tighten it at all. Like the little compartment in the handle.

If your having problems like the guy named C.J. on here was having, DO NOT USE A DREMEL OR MALLET LIKE THEY DID. You have to take out the entire screw slide it on, then screw it back in, it slides between the rails on the picitanny and then tightens the sides together... I LOVE IT ON MY AR!!!!!!!!!

Have been using this just as a grip on my m4 along with the 59.99 rail setup. It is rock solid. The grip has a pressure switch which I have not used quite yet as I do not have a light or laser.

Have been using this just as a grip on my m4 along with the 59.99 rail setup. It is rock solid. The grip has a pressure switch which I have not used quite yet as I do not have a light or laser.

Great grip. only dowside is to tighten the grip onto the rails you have to turn the bottom of the handle. Don't know if it will stay tight after 300 rounds. The price and quality is great.

I got this for my sks and it is great. Very worth the money.

I will have to agree with Kharenzo. The lock-up method on this grip could have been better, but then it would have cost more. Aside from that, I like it.

This grip is rock solid on my utg quad rail, I would reccomend it to anyone. Thanks cheaperthandirt!

I received my grip today and am totally pleased,very solid and mounts in seconds!!!!Highly recommended!!!!

Got this grip for the price and size... I hate the tiny grips. It is not the best and sturdiest grip on the market... but it does work well for the price. It holds the AA batteries for my Eotech and holds the pressure pads for my light and I have fired about 1000 rounds with it on there, and it works great. If you want the one that will take a bullet and stay straight... go take out a loan, because they are expensive. The guy that gave this one bullet... should he really be employed by law enforcement? Using a hammer on plastic? Then wondering why it cracked? Send it back before you destroy it... everything comes with a return label!

This is a great grip to use on any picatinny rail except for one problem. The "screw" or bolt or whatever that tightens it to the rail is made of plastic and as such it deformed when I was adjusting the grip on my rail. This could just be a problem with me but even cinched down all the way it still has a tiny bit of side to side wobble. Overall it's good but i'd rather have one with a metal bolt.

I purchased this grip to mount onto a UTG Quad rail system and is of high quality, just as good as a grip that I purchased from a local gun store for $40.00.

Bought this grip 10 months ago, and it has performed flawlessly. I just put it on my rail, tightened it down, and forgot about it. Easy to remove, and great storage compartment. Will be buying more.

I purchased this grip to mount on a UTG Quad Rail and it works great. Easy install and feels very solid.

I bought this grip for the pressure pad cut out as well as the sturdy look. First I tried to use a mallet to get it to slide on. Then I used a file to try to smooth out the slide portion. Next I actually had to use a Dremel tool to grind out some of the plastic and still had to use a hammer to get it on the rails I bought from CTD. Needless to say the grip started cracking the first time I deployed it on duty as a Police Officer.

Sturdy and works well for the price. Threads on the bottom nut are plastic and a little tight when turning but a little sandpaper took care of it.

I recently bought this and the utg quad rail for my Dpms. What a pair. Works perfect with no movement at all. You dont need anything higher end then this.

I was very impressed by this grip. It is all plastic which may concern some people, but this thing is rock solid. Very good buy. Well worth the money. Mounted easily on my UTG quad rail.

Rock solid, locks in place on my UTG quad-rail and will withstand tremendous force. Feels a little heavy right out of the box but this impressed me, it is not wimpy.

This is a great grip. ordered it on Friday night, got it Wednesday morning. locks solidly in place, feels great in the hand. love the price as well

Absolutely can not be beat for the money. You could pay 70 and get the TD grip but I sure wouldn't. It is plastic but seems pretty stout, and the battery compartment is O-ringed which impressed me, plus it has a spring inside the handle to keep pressure on the batteries to keep them from rattling. If I was a pro I might spend the extra money to get something a little beefier but I'm not so this is great.

Great Product! Fits great and has an awesome feel. Like some others said, looks pretty Bada** as well.

I was skeptikal at first. But after installing this and getting a feel for it, I have to say that it was well worth the money and it looks great too! Oh, and it is not flimsy at all like I was told it might be....

I figured the price being so low would mean its cheap quality.. couldnt be further off, material is great quality, its very comfortable. I put this on my AR15 with a swatforce flashlight with pressure switch and it works great. I highly recommend this product.

This product is at a great price, and it works great too! It is easy to put on and take off, and it also accommodates other tactical gear well. It makes the gun much easier and steadier to aim. I would recommend it anyone!

This is a great grip and i really like the storage compartment! Thanks CTD!

Fits the front rail of my wasr-10 like a glove. Makes it much more comfortable to shoot, especially since the weight of the gun has increased with all the aftermarket parts I've purchased. Allows you to pull the stock in tighter to your shoulder, thus increasing accuracy and conformability. Thanks CTD

I recieved this with my bi-pod and installed it on my Bushmaster AR-15 front rails(that i also bought from CTD) and it fit perfectly. You could not ask for a better product at a better price. Highly recommended.

I bought this grip because it was the only one available at the time. I thought it looked quite bulky and would be cumbersome. In reality, its quite comfortable. It is bigger than most, but fits well in your hand. And even though it is a polymer grip, it feels very sturdy and attaches to my rails very well. Id definately recommend it.

its a solid grip. it had such a tight fit on my rail i had to use a rubber mallet to slide it on there before it was even tightened, but once it was on i was pleased.

I bought this for use on a Mossberg 500 with a picatinny rail forend. Much more comfortable than tommy-gun style pistol grip forends I've used that put your hand at an awkward angle and do not allow for anything but a standard grip. Works great with a streamlight mounted about 1.5 inches in front of it on the rail. Provides a good balance point to my shotgun and easy access to the streamlight switch. Very comfortable to hold in any position and great when working the shotgun's action. Bulky enough to feel sturdy without feeling like a baseball bat. My military days are far behind me so I can't comment on mil/field use, but for home defense and range use should do a bang-up job.

This is a great grip for my AR-15 and like always CTD had quick dilevery service. As soon as I opened it up I slid it right on my AR and it fit perfectly. Thanks CTD!

This is a great feeling grip and secures tightly to my tac rail. I had to cut away a bit of the support on the back of mine so I could quick detatch it by sliding it toward the receiver instead of also removing whatever I had installed in front of it and taking it off towards the muzzle like I believe was intended. As far as SPC 6's comment on it not being sturdy enough for combat, I have yet to fall on mine repeatedly or run it full force into a concrete wall so I have no comment other than it feels like is would take most non-combat wear in stride! And as for the guy who couldnt figure out how to attach his pressure switches: Remove battery compartment, Slide out either right/left side's textured plastic tab, Slide in pressure switch, cord side up(may require some gorilla glue to stay put), and DONE!

I bought this grip and the very similar Tango Down grip from another retailer for about $65.00. This one feels every bit as rugged and durable as the Tango Down, and fits just as tight. This grip is an extremely good deal!

Seems like a nice grip for the price. Had some trouble sliding it onto my surefire quadrail and had to use a hammer to bang it into place. Feels sturdy but i have the feeling if i bang it into something it might break off.

have two of these, one on a Remington 870 mako tactical forend and the other on a WASR 10. Works well in both applications. Angle isnt perfect on the 870, but it is removable which is a plus. Just fine on the WASR 10 though. I like them for the price and have held up well for me at least

Great for the price. Installed on my Sig 556 HOLO - looks like it came with the weapon. When comparing to other grip this one seems to be oversized, but it is a positive - feels great.

I've had this on my Bushmaster AR-15 since Feb. I bought a short rail to mount it on the bottom. So I could still just hold the forestock or use the grip. Terrific price. Very solid and well made. I have a tri-mount rail on the top. I have my tactital light and laser mounted on them. With the pressure switches mounted firmly in the slots that you take out the filler pieces. I don't trust the double-tape. So I got black cable ties and wrapped them around the swtiches top and bottom. Tightened them down and cut off the extra. If you get them positioned right they aren't in the way at all.

Unless I'm going blind, picture makes it look to be of better quality than it actually is. If I would have known that it was made out of plastic, I may have considered buying a different one. I'm a civilian and even I can see how it probably wouldn't hold up to well "in action". However, it does look good and is very comfortable. I'll let you know how it does at the range...

I bought this grip and put it on. It works great. I however can not figure out how to get my pressure switches to work on it. Maybe some one can tell me?

I used 3 of this style hand grips while I was in Iraq. They Kept breaking where it attaches to the hand rail it might be good for civilian use but for mil applacation it didn't hold up to wel

I got mine last week and was very pleased with it as soon as i pulled it out the box.Strong, sturdy, and fits perfectly.

Nice grip, and easy to install. Fits tight on the rail and feels comfortable in my hand .

Got this and the quad rail ARR-138 and they are BOTH awesome! The grip is definitely substantial but even though I have small hands it still feels great. Can't be beat for the money especially with the features it has. SOLID BUY! Thanks CTD!

I installed it on my bushmaster m4 orc its a little loose but it works ok

As with eveyone else I found this to be a great item and a great but way cheap upgrade . But the problem is I couldn't decide which rifle to put it and keep it on so now I'll now I'll havta get one for ALL of 'em . Thanks a frelling lot CTD ! LOL!

Straight out of the package I was amazed to see the quality of the product. Then when I installed it, I was once again amazed to see and feel the sturdiness of the handle. Very nice product and have recommended this to numerous persons.

Awesome grip. Fits sturdy on rail system. (AKS-101) The grip was larger than I expected. Its a good fit for someone with large hands. Easy to take on and off. Worth every penny.

I bought this grip some time back (about a year or so) for my Bushmaster and just wanted to say that it has never let me down even after taking it off and on time and time again, it still works great! bought another one for my AK. Great product! thanks CTD!!!!!!!!!!

Works Great, Feels Great, Price Is Great,Shipping Is Great!!!

Perfect fit for large hands, After ordering product was in my hands in two days.

This grip is amazing. Simple, yet effective. It does it's job- Being a Forend Grip but allows you to store 3 cr123's inside & gives you a place to mount you light trigger. Great Product. 24th MEU

One of the first things I purchased for my first AR. I've never used another vertical grip, so I can't compare it to anything else, but it's comfortable and doesn't seem large to me (I have normal-sized hands). I take mine off frequently (gun cleaning, etc.) and it goes right back on without a hitch. Good product.

this one is just as good as models costing 3-5 times as much.... should have bought this one first! Installed in ten seconds.

Works great! fits pressure switches great. DON'T PUT BATTERIES IN THE COMPARTMENT!! completes circuit with (AA) batteries no matter "++" or "--" gets hot and battery acid everywhere. Very strong and comfortable.

I put my AR-15 Forend Grip on my AK-47 I have a Tri-Rail Universal Barrel mount on my AK and a 5" Picatinny Riser added on to it to come back a little bit [so I am not stretching to hold it! I had a Romanain front grip ,but it did not allow you to hold it [very well] like a traditional rifle so I put the original wood front stock back on! but now! I have the best of both worlds! I can shoot it like a traditional rifle [holding the wood front stock] or I can hold it Tactical style! I have a 5mw Green laser on the side of the tri-rail and on the right hand side I have a Tactical flashlight [90 lumens] with 7per sec. strobe to blind perps in the dark[the darker the better!] the AR-15 Forend grip works great! ,just line up the holes on your Picatinny rail tighten it down and "go to town!" the only thing I did not care for was you need a coin or a common screwdriver [with a thick wide blade] BUT I have the fix it that worked for me! I took out the old drimmal with a thin cutting wheel and found that a quarter is just a little smaller than the slit so I cut about 1/4 off so it was the length of the slit, then I super glued that quarter in the slot! once dry I used some grill spray paint to give it a flat black look. Now I can get them three 123 batterys in no time and it don't look bad! I put My laser pressure switch in the grip {it fit tight,but better tight than not! } and it works great! I can reach the flashlight button no problem! [I use my thumb! If you buy this it is going to be the best $11.97 you ever spent! 5-STARS!!!!!!!!

I got this on an airsoft gun and I have to say that this is a great buy. The bottom is how you tighten it, it also has a housing for pressure switches!!!!!!!!!!!

I put this on a SOCOM II and it fits perfect. You can't beat the price and it was easy to put on. It looks good on bigger guns because of it's size but for the price it will look just fine on any gun.

Put it on my Bushmaster M4 and it works great, looks great, and you can't beat the price... Enough said.

I purchased this grip for my M&P15 with Quad Rail (ARR-073). It feels nice in your hand and has great storage. It is easy to install with absolutely no tools required. I highly recommend.

I just got this grip and it works great. I can place 3 of the 123 batteries in the Grip so if I'm on a call out I have spares. I have not used it on the range let but I am very happy with the grip. GREAT BUY

Grip is exactly as described, and fits well, easy to take on and off with no tools, and stores my c123 batteries nicely. Would definitely get another one at this amazing price!

Purchased this grip a few weeks ago and so far it works great. I've attached my pressure switch for my flashlight and all together it seems to be very durable. Definitely great for the low cost.

I agree with all the rest. This a great grip, easy to install and sturdy.

This grip is SOLID. Fits amazingly well on my Yankee Hill free float. Won't budge at all. Nifty compartment in the grip.

Great product for little $$$. The slots are really great for mounting light/laser pressure switches. True it's a little bigger than other foregrips but if you have bigger hands it's actually better. For those wondering why they didn't get pins or screws for this...YOU DON'T NEED THEM!!! This unit attatches the same way that my knights Armament foregrip does. The center post uses pressure to hold it to the rail. I've had a knight armarment on my current M4 and several prior including the one I carried in the Marine Corps and on a SWAT Team, and never had a problem with wiggling loose. The only reason I purchased this one is because of the slots for the pressure pads. Take it from a professional who relies on equiptment to keep myself and others alive, this will be a great purchase.

I'm a soldier serving in Iraq and this grip serves me well. Makes my weapon easier to carry and control, fits my hand great, its a great place to store some extra batteries for my optics, and the slots for pressure switches are great. If you need a forward grip, this is the one to get.

Very solid, but much longer than I expected. Works well.

I used this grip for my year in Iraq, and I loved it! I like that it is a thicker grip, fits in my hand great. Pressure switch for my light fit well in the groove. Battery storage is great. Holds tight to the rail, rock solid after alot of abuse in Iraq. I am buying a second one just for my own personal rifle!

What else can i say everyone else has covered all of the bases. From what I've noticed the ONLY bad thing is its somewhat bulky. Other than that no complaints.

This one doesn't come with a pin or screw nor does it need to. When you screw out that tube, slide it on the rail, then you screw the tube back in, look through that hole in the side and you'll notice when you screw the tube in a knob sticks up to hold the grip in place on that rail. It works good, I have this on my AR15 and will probably buy another one for my FAL when I get it.

Customer service emailed me, and they are sending me another grip. I have since figured out that this one attaches to the rail by tightening the bottom of the compartment tube against the rail. It seems to work fine, but I would have not ordered it had I know it attached to the rail in this manner. I would prefer screws. But for the money, it seems to be a good grip. It feels tight once in place. I have not got to shoot with the grip yet, but it seems like a secure fit.

This grip seems fine, except that mine did not come with any type of screw or pin to push through the holes to secure it to a rail. Anyone else have this problem? Also, you will need a flat screwdriver or similar tool to remove the cap for the compartment. The entire plastic tube screws out easily, but the cap to open to gain access to the contents of the compartment is slotted and recessed requiring some type of flat edge to open it. I have contacted customer service and am awaiting a reply as to if they will ship me a screw or pin for it. It did not come with any way to affix it to the rail.

The reviews are right on. I figured with the low price quality would be marginal. It's well built and fits great on my rail. Comfortable grip, well worth the price.

This was a great addition to my Stag Arms Model 1H A3. I can shoot as fast as I want without having the sight move away from the target. It is a great peace of hardware. Leapers makes some great products.

i was really suprise how great this piece for my m4.great price and great look.very very happy.......................

wasn't 2 sure of how it would look on my m16 but once i got it on the gun it gives it a real nice look

By far the best value for a pistol grip. This grip fits tight, looks sweet, holds batteries and two pressure switches, and feels great. By far the best value out there.

Very sturdy forend grip. Comfortable with great features. Can't be beat (especially at this price!).

THIS FOREGRIP IS JUST AS GOOD IF NOT ETTER THAN HE TANGO DOWN VERSION COSTING $60+. THE CUTOUTS FOR THE PRESSUR SWITCH IS EXCELLENT. BEST BUY FOR THE BUCK!

Another great Leaper's and CTD value! Very pleased! Thanks!!

Just look at the rating this foregrip has received! I have to agree with everybody that has reviewed this product, what a GREAT product for the price! I would recommend this grip to everybody.

Extreamly comfortable, stores two double A's for my EOTech, and what a price!!! Highly HIGHLY recommend!!!

This is a neat little grip. Super easy to put on, and feels great. No worries about your hand slipping off as the pressure switch inserts on each side have a sand paper like texture to insure a good grip when you don't have any pressure switches mounted in there. My only beef is the pressure switch for my laser is a little too narrow and just pops in and out, so I have to use some electrical tape to hold it in place. But that's my fault because I bought a cheap laser, lol. Maybe some of the better ones use a more standardized pressure switch size. But a great grip, especially for the price!

I can't believe a foregrip this cheap is this nice. It is an excellent foregrip! You absolutely will not be disappointed in this! It is way nice than the YHM foregrip I originally bought. It is very comforable in your hand. BUY BUY BUY!

I JUST INSTALLED ON MY DPMS M4 GLACIER GAURDS AND USED A RAIL ON THE BOTTOM. FITS GREAT AND WOULD RECOMMEND. HAS A STORAGE PLACE FOR 3 123 BATTERIES AND CUT OUT SLOTS FOR PREASURE SWITCH ON EACH SIDE. IT SECURES BY TIGHTEN THE BOTTOM OF THE GRIP. BEATS A 65.00 TANGO DOWN.

Just bought this grip for my Rock River AR-15 and it's awesome. I prefer this over the cheaper normal vertical grip because it's a little fatter so your hand wraps around it more comfortably. And I bet people who spent $60 on a Tango Down is crying in their beers right now. I say buy this before Leapers gets sued because it's an almost exact copy at 1/6 the price. Can't beat that.

Great accesory for any rail system. I really liked the fact there's no bolt and screw, it's very simple. Oh and as for the battery compartment it looks like it's meant to be opened with a quarter.

Just got this grip for fun and i was alot more impressed then i thought i would be and for such a inexpensive price....you can't get a better grip for this price.

I recently bought this grip from CTD for my ak and i love it. it gives the gun one heck of a bad boy look. Installation only took a few seconds and i would recomend this for anyone who has an Ak-47 or Ar-15 with Picantinny rails.

I have this grip on my Rock River AR-15 with the quad rail hand guard. Can't be beat for the price. The slots for pressure switch's works great for the Streamlight TLR-1 switch.

Just recieved Grip, shipping only took 2 days from placing order. Grip fits and feels good. Only complaint is the battery storage. It holds 3 surefire batts, but it takes a screwdriver to take them out, other then that Great.

This is the grip to buy! Slotted for light switches, storage for batteries, finger grooves for a better grip, firmly mounts to rails, not to mention an unbeatable price! What more could you ask for?

In 5 seconds I installed this grip! It is Very comfortable and very practical! And for the money you can't beat it! I recommend this to everyone that has an AR.

I ordered, recieved and installed all in record time thanks to CTD great service. This is the best grip that I have seen anywhere. Fits great and works better. If you are looking for a forgrip then buy this one dont waste time with with any others at the same price and dont waste your money on any that cost more.

Nice fit and feels good. Great price too!!

Nice and tight, only problem was one of the two I ordered stripped slightly when I unscrewed the battery case. It was a pain to get back in straight but I did. Wish there was a download page for pictures to show these products being used, that would be cool. Great price for this grip.

I have purchased all there of these grips, black, coyote and green, all have performed well. A litttle bulky but very comfortable. Side pressure pad panels are great, battery sotrage is good, 2 AA or 3 123 Lithium. End cap is both slotted and "knurled" which is good to have BOTH features.

Product works great on my AR-15 fits perfect on a Quad Rail, CTD very quick shipping at a great price

I have only one bad thing to say. THe grip seems a little bulky but other than that I like it.

this is really a good grip. both side pressure switch slots are great for lights and laser cords. the only flaw i've found is the sloted cap on the storage compartment and the plastic tip that sets in the rail mount . it;s holding up very well after a year of heavy use on M4. I would buy another one.