I bought this grip and put it on. It works great. I however can not figure out how to get my pressure switches to work on it. Maybe some one can tell me?

I used 3 of this style hand grips while I was in Iraq. They Kept breaking where it attaches to the hand rail it might be good for civilian use but for mil applacation it didn't hold up to wel

I got mine last week and was very pleased with it as soon as i pulled it out the box.Strong, sturdy, and fits perfectly.

Nice grip, and easy to install. Fits tight on the rail and feels comfortable in my hand .

Got this and the quad rail ARR-138 and they are BOTH awesome! The grip is definitely substantial but even though I have small hands it still feels great. Can't be beat for the money especially with the features it has. SOLID BUY! Thanks CTD!

I installed it on my bushmaster m4 orc its a little loose but it works ok

As with eveyone else I found this to be a great item and a great but way cheap upgrade . But the problem is I couldn't decide which rifle to put it and keep it on so now I'll now I'll havta get one for ALL of 'em . Thanks a frelling lot CTD ! LOL!

Straight out of the package I was amazed to see the quality of the product. Then when I installed it, I was once again amazed to see and feel the sturdiness of the handle. Very nice product and have recommended this to numerous persons.

Awesome grip. Fits sturdy on rail system. (AKS-101) The grip was larger than I expected. Its a good fit for someone with large hands. Easy to take on and off. Worth every penny.

I bought this grip some time back (about a year or so) for my Bushmaster and just wanted to say that it has never let me down even after taking it off and on time and time again, it still works great! bought another one for my AK. Great product! thanks CTD!!!!!!!!!!

Works Great, Feels Great, Price Is Great,Shipping Is Great!!!

Perfect fit for large hands, After ordering product was in my hands in two days.

This grip is amazing. Simple, yet effective. It does it's job- Being a Forend Grip but allows you to store 3 cr123's inside & gives you a place to mount you light trigger. Great Product. 24th MEU

One of the first things I purchased for my first AR. I've never used another vertical grip, so I can't compare it to anything else, but it's comfortable and doesn't seem large to me (I have normal-sized hands). I take mine off frequently (gun cleaning, etc.) and it goes right back on without a hitch. Good product.

this one is just as good as models costing 3-5 times as much.... should have bought this one first! Installed in ten seconds.

Works great! fits pressure switches great. DON'T PUT BATTERIES IN THE COMPARTMENT!! completes circuit with (AA) batteries no matter "++" or "--" gets hot and battery acid everywhere. Very strong and comfortable.

I put my AR-15 Forend Grip on my AK-47 I have a Tri-Rail Universal Barrel mount on my AK and a 5" Picatinny Riser added on to it to come back a little bit [so I am not stretching to hold it! I had a Romanain front grip ,but it did not allow you to hold it [very well] like a traditional rifle so I put the original wood front stock back on! but now! I have the best of both worlds! I can shoot it like a traditional rifle [holding the wood front stock] or I can hold it Tactical style! I have a 5mw Green laser on the side of the tri-rail and on the right hand side I have a Tactical flashlight [90 lumens] with 7per sec. strobe to blind perps in the dark[the darker the better!] the AR-15 Forend grip works great! ,just line up the holes on your Picatinny rail tighten it down and "go to town!" the only thing I did not care for was you need a coin or a common screwdriver [with a thick wide blade] BUT I have the fix it that worked for me! I took out the old drimmal with a thin cutting wheel and found that a quarter is just a little smaller than the slit so I cut about 1/4 off so it was the length of the slit, then I super glued that quarter in the slot! once dry I used some grill spray paint to give it a flat black look. Now I can get them three 123 batterys in no time and it don't look bad! I put My laser pressure switch in the grip {it fit tight,but better tight than not! } and it works great! I can reach the flashlight button no problem! [I use my thumb! If you buy this it is going to be the best $11.97 you ever spent! 5-STARS!!!!!!!!

I got this on an airsoft gun and I have to say that this is a great buy. The bottom is how you tighten it, it also has a housing for pressure switches!!!!!!!!!!!

I put this on a SOCOM II and it fits perfect. You can't beat the price and it was easy to put on. It looks good on bigger guns because of it's size but for the price it will look just fine on any gun.

Put it on my Bushmaster M4 and it works great, looks great, and you can't beat the price... Enough said.

I purchased this grip for my M&P15 with Quad Rail (ARR-073). It feels nice in your hand and has great storage. It is easy to install with absolutely no tools required. I highly recommend.

I just got this grip and it works great. I can place 3 of the 123 batteries in the Grip so if I'm on a call out I have spares. I have not used it on the range let but I am very happy with the grip. GREAT BUY

Grip is exactly as described, and fits well, easy to take on and off with no tools, and stores my c123 batteries nicely. Would definitely get another one at this amazing price!

Purchased this grip a few weeks ago and so far it works great. I've attached my pressure switch for my flashlight and all together it seems to be very durable. Definitely great for the low cost.

I agree with all the rest. This a great grip, easy to install and sturdy.

This grip is SOLID. Fits amazingly well on my Yankee Hill free float. Won't budge at all. Nifty compartment in the grip.

Great product for little $$$. The slots are really great for mounting light/laser pressure switches. True it's a little bigger than other foregrips but if you have bigger hands it's actually better. For those wondering why they didn't get pins or screws for this...YOU DON'T NEED THEM!!! This unit attatches the same way that my knights Armament foregrip does. The center post uses pressure to hold it to the rail. I've had a knight armarment on my current M4 and several prior including the one I carried in the Marine Corps and on a SWAT Team, and never had a problem with wiggling loose. The only reason I purchased this one is because of the slots for the pressure pads. Take it from a professional who relies on equiptment to keep myself and others alive, this will be a great purchase.

I'm a soldier serving in Iraq and this grip serves me well. Makes my weapon easier to carry and control, fits my hand great, its a great place to store some extra batteries for my optics, and the slots for pressure switches are great. If you need a forward grip, this is the one to get.

Very solid, but much longer than I expected. Works well.

I used this grip for my year in Iraq, and I loved it! I like that it is a thicker grip, fits in my hand great. Pressure switch for my light fit well in the groove. Battery storage is great. Holds tight to the rail, rock solid after alot of abuse in Iraq. I am buying a second one just for my own personal rifle!

What else can i say everyone else has covered all of the bases. From what I've noticed the ONLY bad thing is its somewhat bulky. Other than that no complaints.

This one doesn't come with a pin or screw nor does it need to. When you screw out that tube, slide it on the rail, then you screw the tube back in, look through that hole in the side and you'll notice when you screw the tube in a knob sticks up to hold the grip in place on that rail. It works good, I have this on my AR15 and will probably buy another one for my FAL when I get it.

Customer service emailed me, and they are sending me another grip. I have since figured out that this one attaches to the rail by tightening the bottom of the compartment tube against the rail. It seems to work fine, but I would have not ordered it had I know it attached to the rail in this manner. I would prefer screws. But for the money, it seems to be a good grip. It feels tight once in place. I have not got to shoot with the grip yet, but it seems like a secure fit.

This grip seems fine, except that mine did not come with any type of screw or pin to push through the holes to secure it to a rail. Anyone else have this problem? Also, you will need a flat screwdriver or similar tool to remove the cap for the compartment. The entire plastic tube screws out easily, but the cap to open to gain access to the contents of the compartment is slotted and recessed requiring some type of flat edge to open it. I have contacted customer service and am awaiting a reply as to if they will ship me a screw or pin for it. It did not come with any way to affix it to the rail.

The reviews are right on. I figured with the low price quality would be marginal. It's well built and fits great on my rail. Comfortable grip, well worth the price.

This was a great addition to my Stag Arms Model 1H A3. I can shoot as fast as I want without having the sight move away from the target. It is a great peace of hardware. Leapers makes some great products.

i was really suprise how great this piece for my m4.great price and great look.very very happy.......................

wasn't 2 sure of how it would look on my m16 but once i got it on the gun it gives it a real nice look

By far the best value for a pistol grip. This grip fits tight, looks sweet, holds batteries and two pressure switches, and feels great. By far the best value out there.

Very sturdy forend grip. Comfortable with great features. Can't be beat (especially at this price!).

THIS FOREGRIP IS JUST AS GOOD IF NOT ETTER THAN HE TANGO DOWN VERSION COSTING $60+. THE CUTOUTS FOR THE PRESSUR SWITCH IS EXCELLENT. BEST BUY FOR THE BUCK!

Another great Leaper's and CTD value! Very pleased! Thanks!!

Just look at the rating this foregrip has received! I have to agree with everybody that has reviewed this product, what a GREAT product for the price! I would recommend this grip to everybody.

Extreamly comfortable, stores two double A's for my EOTech, and what a price!!! Highly HIGHLY recommend!!!

This is a neat little grip. Super easy to put on, and feels great. No worries about your hand slipping off as the pressure switch inserts on each side have a sand paper like texture to insure a good grip when you don't have any pressure switches mounted in there. My only beef is the pressure switch for my laser is a little too narrow and just pops in and out, so I have to use some electrical tape to hold it in place. But that's my fault because I bought a cheap laser, lol. Maybe some of the better ones use a more standardized pressure switch size. But a great grip, especially for the price!

I can't believe a foregrip this cheap is this nice. It is an excellent foregrip! You absolutely will not be disappointed in this! It is way nice than the YHM foregrip I originally bought. It is very comforable in your hand. BUY BUY BUY!

I JUST INSTALLED ON MY DPMS M4 GLACIER GAURDS AND USED A RAIL ON THE BOTTOM. FITS GREAT AND WOULD RECOMMEND. HAS A STORAGE PLACE FOR 3 123 BATTERIES AND CUT OUT SLOTS FOR PREASURE SWITCH ON EACH SIDE. IT SECURES BY TIGHTEN THE BOTTOM OF THE GRIP. BEATS A 65.00 TANGO DOWN.

Just bought this grip for my Rock River AR-15 and it's awesome. I prefer this over the cheaper normal vertical grip because it's a little fatter so your hand wraps around it more comfortably. And I bet people who spent $60 on a Tango Down is crying in their beers right now. I say buy this before Leapers gets sued because it's an almost exact copy at 1/6 the price. Can't beat that.

Great accesory for any rail system. I really liked the fact there's no bolt and screw, it's very simple. Oh and as for the battery compartment it looks like it's meant to be opened with a quarter.

Just got this grip for fun and i was alot more impressed then i thought i would be and for such a inexpensive price....you can't get a better grip for this price.

I recently bought this grip from CTD for my ak and i love it. it gives the gun one heck of a bad boy look. Installation only took a few seconds and i would recomend this for anyone who has an Ak-47 or Ar-15 with Picantinny rails.

I have this grip on my Rock River AR-15 with the quad rail hand guard. Can't be beat for the price. The slots for pressure switch's works great for the Streamlight TLR-1 switch.

Just recieved Grip, shipping only took 2 days from placing order. Grip fits and feels good. Only complaint is the battery storage. It holds 3 surefire batts, but it takes a screwdriver to take them out, other then that Great.

This is the grip to buy! Slotted for light switches, storage for batteries, finger grooves for a better grip, firmly mounts to rails, not to mention an unbeatable price! What more could you ask for?

In 5 seconds I installed this grip! It is Very comfortable and very practical! And for the money you can't beat it! I recommend this to everyone that has an AR.

I ordered, recieved and installed all in record time thanks to CTD great service. This is the best grip that I have seen anywhere. Fits great and works better. If you are looking for a forgrip then buy this one dont waste time with with any others at the same price and dont waste your money on any that cost more.

Nice fit and feels good. Great price too!!

Nice and tight, only problem was one of the two I ordered stripped slightly when I unscrewed the battery case. It was a pain to get back in straight but I did. Wish there was a download page for pictures to show these products being used, that would be cool. Great price for this grip.

I have purchased all there of these grips, black, coyote and green, all have performed well. A litttle bulky but very comfortable. Side pressure pad panels are great, battery sotrage is good, 2 AA or 3 123 Lithium. End cap is both slotted and "knurled" which is good to have BOTH features.

Product works great on my AR-15 fits perfect on a Quad Rail, CTD very quick shipping at a great price

I have only one bad thing to say. THe grip seems a little bulky but other than that I like it.

this is really a good grip. both side pressure switch slots are great for lights and laser cords. the only flaw i've found is the sloted cap on the storage compartment and the plastic tip that sets in the rail mount . it;s holding up very well after a year of heavy use on M4. I would buy another one.

I have this vertical grip mounted on my DSA STG58. It holds up well and is comfortable. The pressure switch on my Surefire light fits perfectly in the space provided. My only complaint is that you need a coin or key to unscrew the cap to access the storage compartment, making quick access to spare batteries difficult. Excellent product for the price.