This thing is crap scratches the hell out of your mags. The mags will slide fairly easy and as stated these will spread and will snag things. If you want the look you can get it. I guess it makes the gun look intimidating. I don’t recommend for actual use.

Check out the picture for this product. See how the flanges do not connect up with the screw plate? Yeah thats because the screw plate is not the right size for these mags. When you tighen up the plate, those flanges keep getting further and further away from the mag, and will catch anthing they come in contact with - like your hand/glove. You can tell that the original design was to have the screw plate cover those flanges, but someone surely burnt the toast. Oh, and you better be careful and not bump the other mag - it WILL slip. But hey, if your goal is to throw down 60 rounds real quick with no reliablity, then go ahead.

For eight dollars this is a great way to make 60 rounds readily accessible. The magazines hold securely in my Colt. This is worth the price. I tried my Magpul PMAGs and they do not fit well, metal mags work great.

They work well as said by others. They bend easy, but seem to hold up.

Not bad. Putting it on is a piece of cake.

Works as well as advertised. No problems with putting it together (takes two minutes) and can take the rigors of shooting and movement. Good product, worth the money.

This sucker is a tank. Used it with some Pmags and it fits them well. not the prettiest girl at the dance but the toughest!!!

I have 2 other couplers from CAA (plastic) and while this one does spread the mags a lot more than it, it also facilitates the changing of magazines far more than my CAA mag coupler. I bought 2, but might think about buying more...

Awesome mag clips. I use them for my airsoft AR mag. I use 2 Magpul mags and it fits them like it was part of them. Screw it down it will never let go. Simple and incredibly effective. Get these!!

Awesome product, I have several of these and they work great with both my colt and brownell mags. Nice having 60 rounds at my fingers. Its 8 bucks what are you waiting for..ORDER THEM!!!

IT GOOD TO SEE OTHER AGREE ON THE QUALITY OF THESE MAG CLIPS ARE GOOD, YES THEY ARE SHINY BUT (steel wool dulls the finish to a matte look)thanks C.T.D.

Installed a set of clamps on two MagPul polymer mags. The grip is tight, the installation took seconds, and the groves on the MagPul Mags even fits the gripping lip on the clamp. Solid product, keeps your ammo where you need it, and I'll be buying more.

I had mine attached to 2 factory aluminum mags and no matter what I did, if I hit the ground hard, one mag would slip! I had two Thermold polymer 30rd mags (from before I discovered Magpuls complete dominance!)so I replaced the springs and followers (took some work to make em fit) and then trimmed down this metal coupler to about .75" tall so it would fit tight between the mags molding. WORKS GREAT! It is now one of my favorite setups! Wish you could do it the same with Magpuls mags but the molding is different :( If you have any Thermold mags, a bandsaw, some magpul followers and some TIME then this is for you!

I also bought only 1 just to see how i liked it and now I plan on buying more. Fits mags tight and secure and switching mags is easy and FAST. Awsome product!!!

I ordered one just in case I didn't like it. Well now i'm ordering a few more. makes reloading quick just when i need it. I really recommend these puppies!

DEPUTY V per your question; get a saw pouch item #ARR-009 here at C.T.D. i have 3 of these, you will find you have room for more mags as well. good luck

holds to mags very secure and does not interfere wit the function of the gun at all if you adjust the mags in the clamp properly

I was very surprised about the strong gripping power with the stiff support. I never had problems with bending of any kind. I even used 2 clamps to hold three mags with the same results. Any more than 3 mags and it wouldn't be combat efficient. How would you carry 3 coupled mags on your person as backup?

Great item, except..if you hit the ground it will bend, so.. am ordering 3 more.. put two on a set of mags, should minimize the problem, also moving the mags to a more protected area, like on the side..

Very secure clamp- Can't see spending more money for any other!!

Wonderful product. simple to use, just get our two AR-15 Mags and put them together with a simple screw and alan wrench included!! no problems

It functions well and is worth the money. I would not recommend this if you are a soldier who's life depends on it. I most likely will bend with little force. Use it w/ a couple of cheap STEEL mags. It will however provide me w/ quick access to 60 rnds.

this is a grat product. the clips fit easy and it holds them strong. simple and a great price.

Fits good, I don't feel it is robus, but what to you expect for this price.

This mag coupler is not a good design for actual field work. it will bend easily if you have it in your mag pouches and lay down on it in the prone. i wont be using it anymore after being let down by it once

Can't beat the price. Only one thing to note it the black paint is shinny on the clamp surface.